| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix mailbox segment buffer overflow
check_mbox_seq_id_and_seg_len() validates that seq_id does not
exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed
MBOX_SEG_LEN (48). However, this allows the last segment
(seq_id=42) to carry a full 48-byte payload, writing to offset
42*48=2016 for 48 bytes (ending at byte 2064). The receive
buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a
16-byte heap buffer overflow.
The hinic3 driver already handles this correctly by defining
MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it
exceeds the remaining buffer space. Apply the same fix to the
hinic driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
If a netlink socket sends RTM_GETCHAIN requests repeatedly
without recv()ing the responses, tc_ctl_chain() hogs CPU and
triggers Hung Task splat. [0]
As caught in the stack trace, netlink_attachskb() could confuse
tc_ctl_chain() by returning -EAGAIN when the userspace netlink
socket's receive buffer is full.
The replay: label exists since commit 32a4f5ecd738 ("net: sched:
introduce chain object to uapi") but was not used initially.
Since commit 9f407f1768d3 ("net: sched: introduce chain templates"),
the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops()
may release RTNL to call request_module().
However, the replay logic is unnecessary for RTM_GETCHAIN.
Let's apply the replay logic only for RTM_NEWCHAIN.
[0]:
INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022.
task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000
Call Trace:
<TASK>
? clockevents_program_event (kernel/time/clockevents.c:372)
? pskb_expand_head (net/core/skbuff.c:615)
? skb_release_data (net/core/skbuff.c:1122)
? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232)
? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499)
? tc_chain_notify (net/sched/cls_api.c:3045)
? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041)
? netlink_unicast (net/netlink/af_netlink.c:1335)
? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985)
? tc_ctl_chain (net/sched/cls_api.c:3242)
? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146)
? netlink_unicast (net/netlink/af_netlink.c:1354)
? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177)
? netlink_rcv_skb (net/netlink/af_netlink.c:2556)
? netlink_unicast (net/netlink/af_netlink.c:1319)
? netlink_sendmsg (net/netlink/af_netlink.c:1900)
? __sock_sendmsg (net/socket.c:800)
? __sys_sendto (net/socket.c:2281)
? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284)
? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event->pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Allow list_del during perf_event_overflow()
A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec()
interface to get the PMU call back function pmu::sched_task
invoked at schedule in and schedule out. This is achieved
by walking along the list anchored by sched_cb_list.
The following scenario might lead to a list corruption.
perf_pmu_sched_task()
for_each_list_entry(..., &sched_cb_list)
+--> __perf_pmu_sched_task()
+--> event->pmu->sched_task())
+--> PMU_push_sample()
+--> perf_event_overflow()
+--> __perf_event_overflow()
+--> pmu->stop()
+--> perf_sched_cb_dec()
remove entry from sched_cb_list
while list node in use.
This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been
invoked and perf_event::event_limit hits zero.
Prevent the list corruption and convert for_each_list_entry()
to for_each_list_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor vnic reporter to eswitch devlink port
The representor vnic devlink health reporter is created and destroyed
along the representor netdev (un)load path, which is not serialized by
the devlink instance lock. Destroying the reporter from there triggers
a devl_assert_locked() splat on driver unbind:
WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758
Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ...
CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ...
RIP: 0010:devl_assert_locked+0x54/0x70
Call Trace:
<TASK>
devl_health_reporter_destroy+0x3a/0x1b0
mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core]
? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core]
? kernfs_remove_by_name_ns+0xc3/0xf0
device_release_driver_internal+0x3b2/0x560
unbind_store+0xce/0xf0
Move the reporter's lifecycle to the eswitch devlink port (un)register
paths, which are already serialized by the devlink instance lock, and
store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the
reporter priv since the diagnose callback only needs a device handle and
a vport number, and mlx5_vport carries both and is initialized before
any representor driver probes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: initialize ptp_lock at probe time
priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs
during __stmmac_open(). However, the lock is also used while the
interface is down and has never been opened: tc_taprio_configure()
invokes the PTP gettime64() callback to compute the EST base time when
offloading a TAPRIO schedule, and stmmac_get_time() takes
priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour.
Move the rwlock_init() to __stmmac_dvr_probe(), together with the other
private locks, so that ptp_lock is always valid regardless of the
interface state. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_synctty: ensure a writeable skb header
ppp_sync_txmunge() checks headroom before prepending the address and
control bytes, but does not ensure that the skb header is writable.
A received skb can reach this function through PPP channel bridging
without passing through ppp_start_xmit(), which calls skb_cow_head().
For example, a PPPoE frame may share its buffer with a clone queued to
an AF_PACKET socket. If it is bridged to a synchronous tty channel, the
address/control bytes can overwrite data still visible to that socket.
Use skb_cow_head() to ensure both sufficient headroom and a writable
header. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Don't free the live ring's TPA state on queue restart failure
bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone:
memcpy(clone, rxr, sizeof(*rxr));
the code currently clears pointers that the clone owns (such as
rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory
of the live ring that was cloned.
If an allocation failure happens later and the err_free_tpa_info label
is taken, the live ring's memory can be freed while still in use.
Fix this by initializing the clone's pointers to NULL to prevent live
ring state from being freed inadvertently. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC tile counts
The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from
column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[]
and use them as tile-loop bounds, but std_validate_compound() does not
bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling
enabled whose tile counts exceed the uAPI array capacity, mirroring the
existing compound-control range checks. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer
rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by
tile_info->tile_cols and writes one descriptor per tile into the tile_info
DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows
come from the bitstream. Guard the division against a zero tile_cols by
initialising the context-update values to zero and computing them only
when tile_cols is non-zero, and stop the descriptor writes once the
tile_info buffer is full. The tile geometry written to the hardware
registers is left unmodified; the per-dimension and total tile bounds are
enforced by the control validation. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity
vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries
into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound
the copy to the array capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Remove debugfs entries when probe fails
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Create debugfs entries after hwmon registration
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp->mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| In the Linux kernel, the following vulnerability has been resolved:
nstree: check listing permission before taking a namespace reference
legitimize_ns() takes a reference on the candidate namespace before
may_list_ns() has decided whether the caller may see it. The
__free(ns_put) cleanup on the denied path can drop the last reference to a
mount namespace while we still hold the rcu read lock, and put_mnt_ns()
may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make
sure reference are dropped outside of rcu lock") fixed for the put_user()
path. Neither ns_requested() nor may_list_ns() needs a reference, both
only look at the namespace type and at the caller's own namespaces, so do
the checks first and take the reference last.
Splat:
Voluntary context switch within RCU read-side critical section!
WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442
CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy)
RIP: 0010:rcu_note_context_switch+0x238/0x2a0
Call Trace:
<TASK>
__schedule+0xcf/0x650
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
exp_funnel_lock+0xb2/0x260
synchronize_rcu_expedited+0xe7/0x220
namespace_unlock+0x26a/0x320
put_mnt_ns+0xd3/0x120
mntns_put+0xe/0x20
do_listns+0x13e/0x560
__do_sys_listns+0x126/0x2d0
__x64_sys_listns+0x20/0x30
x64_sys_call+0x2366/0x2390
do_syscall_64+0x105/0x5a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: destroy the phylink instance on the probe error path
macb_mii_init() creates a phylink instance on both of its success paths,
but the probe unwind frees the netdev without destroying it, so a failing
macb_alloc_tieoff() or register_netdev() leaks the instance.
Destroy it at err_out_unregister_mdio, which is only reachable once
macb_mii_init() has succeeded, so bp->phylink is valid there. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_find_any_child() and calls device_move() to
reparent it to NULL, which removes the node from its parent's klist and
clears knode_parent. Subsequently, device_del() calls
klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing
klist_put() to dereference knode_klist(n)->put on an already removed node,
resulting in a NULL pointer dereference.
This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix
use-after-free in device_for_each_child()"), which replaced
device_find_child(..., __match_tty) with device_find_any_child() in
hci_conn_del_sysfs(). That change was intended to avoid a use-after-free
where conn->dev outlived its parent hdev->dev when child devices held
references to conn->dev, because conn->dev only held a reference to
hdev->dev while registered in sysfs.
Fix the issue properly by taking an explicit reference to the parent device
with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with
put_device(parent) in bt_link_release() when the conn device is freed. This
ensures that hdev->dev remains valid for the entire lifecycle of conn->dev,
resolving the underlying use-after-free. With the parent reference held
properly, restore the __match_tty filter in hci_conn_del_sysfs() so that
device_move() is only invoked on persistent RFCOMM TTY devices as
originally intended, eliminating the race condition with unregistering
network devices. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: ice: don't dereference pointers from TP_printk()
After forwarding net-next during the v7.3 merge window we started
seeing:
TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index
WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b
this is due to extra checks added in tracing subsystem in
commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()").
Printing happens long after the event was recorded, by which point
the pointers may be invalid (the ring or the dim instance).
Copy the eight scalars into the event instead. |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. |
