| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: reject the lmk IV mode with AEAD ciphers
A "capi:" table line that pairs an AEAD cipher with the lmk IV mode,
for example "capi:gcm(aes)-lmk" with the integrity:28:aead option,
causes an oops when it is loaded. lmk sets tfms_count to 64, but
crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey
reads past the end of the tfms_aead array and calls crypto_aead_setkey
on the values it finds there.
lmk exists for compatibility with Loop-AES, which uses CBC, so refuse
it with an AEAD cipher rather than allocate 64 AEAD transforms. The
check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because
the IV constructor runs after crypt_set_key.
Note that this is not a security bug because the memory corruption can
only be triggered by root. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: core: wait for request completion before freeing card
In memstick_alloc_card() and memstick_set_rw_addr(),
wait_for_completion_timeout() is used to wait for device identification
and address configuration requests to complete.
The memstick subsystem does not provide an abort or cancellation
callback in struct memstick_host for in-flight requests. If
wait_for_completion_timeout() expires (for instance, when a USB transfer
or command retry is delayed), memstick_alloc_card() returns an error and
frees the memstick_dev structure via kfree(card).
However, the host controller driver (such as rtsx_usb_ms) is still
running the request asynchronously in worker context. When the transfer
eventually finishes, the driver writes into host->req->data, which
points to memory inside the already freed card structure. This leads to
a KASAN slab-use-after-free write:
BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990
Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239
Workqueue: events rtsx_usb_ms_handle_req
Call Trace:
ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450
rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline]
rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560
kthread+0x373/0x450 kernel/kthread.c:436
Allocated by task 1662:
memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline]
memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Freed by task 1662:
kfree+0x20c/0x650 mm/slub.c:6792
memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline]
memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already
implement their own hardware and bus timeouts, and callers in
mspro_block and ms_block already rely on wait_for_completion()
unconditionally.
Replace wait_for_completion_timeout() with wait_for_completion() in
memstick_set_rw_addr() and memstick_alloc_card() so that the card
structure is never freed while an asynchronous request is in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix add_key() race with keyring restriction
__key_create_or_update() snapshots keyring->restrict_link before taking
the destination keyring's semaphore. keyring_restrict() installs a
restriction while holding that semaphore.
This allows a writer to observe no restriction, wait for the keyring
owner to install a reject-all restriction and return successfully, and
then link a key using the stale NULL snapshot. The writer only needs
write permission on the destination keyring.
Move the restrict_link read after __key_link_lock() and
__key_link_begin(). The read and the subsequent restriction check are
then serialized with restriction installation by keyring->sem.
The race was reproduced on v7.2.8 in 19 executions where restriction
installation returned before the link completed. All 19 linked the key
despite the reject-all restriction. With this change, 312 executions
reached the same ordering and every add_key() call failed with -EPERM.
The issue was found by manual concurrency analysis assisted by AI-based
analysis and independently verified with a QEMU reproducer and kernel
instrumentation. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix metadata_dst refcount handling on representor teardown
ice_eswitch_release_repr() uses metadata_dst_free() to release the
representor's metadata_dst. metadata_dst_free() directly frees the
underlying memory without checking the dst_entry refcount.
When ice_eswitch_port_start_xmit() processes a packet, it takes a
reference via dst_hold() and attaches the metadata_dst to the skb.
If the representor is torn down while packets are still queued on
the lower device (e.g. in a qdisc), the metadata_dst is freed while
references are still held.
Use dst_release() instead, which correctly decrements the refcount
and only frees the object when all references are dropped. The dst
subsystem already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set.
Other drivers sharing this pattern (nfp, airoha, bnxt) already use
dst_release() for their metadata_dst lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: xilinx: fix runtime PM leak on request error path
pm_runtime_get_sync() leaves the usage counter incremented even when it
fails, and xgpio_request() returns the error without dropping it.
gpiolib does not call ->free() when ->request() fails, so xgpio_free(),
which holds the only matching pm_runtime_put(), never runs. The reference
is leaked and the controller can no longer runtime-suspend, so its clock
stays enabled.
Switch to pm_runtime_resume_and_get(), which only increments the usage
counter on success. |
| Vulnerability in the Siebel CRM End User product of Oracle Siebel CRM (component: Open UI). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Siebel CRM End User. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM End User accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| An unauthenticated file write vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation could allow an unauthenticated remote attacker to make limited modifications to files on the affected system and to disrupt the availability of the affected service. |
| An unauthenticated buffer overflow vulnerability exists in the PAPI protocol of AOS-8. Successful exploitation could allow an unauthenticated remote attacker to disrupt the availability of the affected service on the controller, with a limited impact to its integrity. |
| Incorrect Calculation vulnerability in VillaTheme CURCY woo-multi-currency allows Integer Attacks.This issue affects CURCY: from n/a through 2.2.17. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop route notification sizing when nexthop group shrinks
Commit 680aea08e78c ("net: ipv4: Emit notification when fib
hardware flags are changed") added an RCU-only fib_nlmsg_size() call
for asynchronous hardware flag notifications.
fib_nlmsg_size() checks fib_info_num_path() before each iteration,
then fib_info_nhc() independently reloads nh->nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences
it.
Stop sizing when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| @pdfme/common from 5.5.10 before 6.2.6 contains a server-side request forgery vulnerability that allows attackers to bypass the isUrlSafeToFetch denylist in getB64BasePdf. Attackers can supply basePdf URLs using IPv4-mapped IPv6, [::], NAT64 or localhost alias hostnames to read loopback, internal or cloud metadata responses through generated documents. |
| i18next-http-backend 4.0.2 contains an incomplete fix in interpolateUrl() that allows attackers to redirect translation requests by supplying an ns value starting with a slash. Attackers controlling the namespace value can form a protocol-relative URL in loadPath or addPath templates to load attacker-hosted translations, enabling UI content injection and cross-site scripting. |
| Signal K Server from 2.28.0-beta.2 before 2.34.0 contains a server-side request forgery vulnerability in the App Store icon fetcher that trusts absolute signalk.appIcon URLs. Attackers publishing npm packages with Signal K keywords can make servers request loopback, vessel network, or cloud metadata endpoints, storing image-typed responses served back via the admin UI. |
| Wasmtime is a runtime for WebAssembly. From 46.0.0 until 48.0.7 and 49.0.4, lowering a host-created component-model stream or future into a guest can omit a required payload-type check after the value passes through guest code and returns through StreamAny, FutureAny, Val::Stream, Val::Future, or an equivalent typed reader. A malicious guest that controls exported function types or returned values can cause the host to pass the type-erased value to a guest expecting a different payload type, which panics the Wasmtime host. This issue is fixed in versions 48.0.7 and 49.0.4. |
| Vulnerability in the Oracle Identity Manager product of Oracle Fusion Middleware (component: REST WebServices). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Identity Manager. Successful attacks of this vulnerability can result in takeover of Oracle Identity Manager. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| An authentication bypass vulnerability in the underlying operating system of AOS-8 could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system leading to complete system compromise. |
| Contributor Cross Site Scripting (XSS) in King Addons for Elementor <= 51.1.86 versions. |
| A local privilege escalation vulnerability in the optional dnscache package of Zimbra Collaboration Suite (ZCS) allows the Unix zimbra account to access files with root privileges. The passwordless sudo policy permits arbitrary arguments to zmunbound, whose wrapper forwards them to Unbound without restricting the configuration path. An attacker can supply a configuration that retains root privileges and disables the chroot. Include directives expose root-readable file contents through parser errors, while an attacker-selected logfile path creates a root-owned file or appends Unbound log records to an existing file. This can disclose password hashes and private keys and corrupt privileged configuration files, preventing affected services from starting with the modified configuration. The affected configuration is present in ZCS 10.1.16 and 10.1.21 dnscache packages. |
