| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Insufficient Session Expiration vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to Elevation of privileges, Protection mechanism bypass, and Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, and Protection mechanism bypass. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, Versions prior to 5.36, contains a Weak Encoding for Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, Protection mechanism bypass, and Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Inclusion of Sensitive Information in Source Code vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, when pattern-based ACL rules are configured, AuthorizationsCollector.canDoOperation substitutes client ID and username values directly into rules containing %c or %u and then treats the result as an MQTT topic filter. A client that uses + or # in either identity can broaden the substituted filter and gain cross-tenant read and write access. A # identity can also produce an invalid filter that triggers a NullPointerException in Topic.match and disrupts session processing. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, SessionEventLoop.run catches only InterruptedException, and SessionEventLoopGroup does not restart a terminated loop. An MQTT command that raises an uncaught exception can terminate an event loop shared by multiple client sessions, preventing every co-located client from processing PUBLISH, SUBSCRIBE, PUBACK, and other commands. An attacker can select client IDs that map across the available loops to disrupt session processing for the entire broker. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.subscribe parses a shared-subscription filter through SharedSubscriptionUtils.extractShareName before validating the complete $share/{shareName}/{topicFilter} structure. A remote client can send a filter such as $share/grp without a topic-filter portion, causing a StringIndexOutOfBoundsException while calculating the share name. The exception terminates command handling on the shared session event loop and can deny service to other client sessions assigned to that loop. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, the broker does not enforce a maximum length for pending per-session message queues. When a fast publisher sends messages to a slow subscriber whose in-flight window is full, queued messages can accumulate without bound in memory or persistent storage. Remote clients can use this condition to exhaust broker resources and cause a denial of service. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.publishWill publishes a client's Last-Will message without applying the canWrite authorization and reserved-topic checks used for a normal PUBLISH. A client can configure a Will for a topic that the client is not permitted to write and cause the broker to publish the unauthorized message when the client disconnects unexpectedly. This issue allows unauthorized message injection into restricted topics. This issue is fixed in version 0.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch null pointer dereference
This happens because of a special case in check_cond_jmp_op(),
which attempts to strip PTR_MAYBE_NULL flags from pointer types,
when processing comparisons like `rA == rB`, if either rA or rB can't
be null.
The non-null property is derived based on the absence of
PTR_MAYBE_NULL flag on rA's or rB's type. But that is not sufficient
for types like PTR_TO_MEM, as in the example.
This patch replaces type_may_be_null() call with reg_not_null(),
which contains an allowlist of types for which absence of
PTR_MAYBE_NULL actually means that the value can't be NULL at runtime.
At the moment, the list in the reg_not_null() omits two types for
which PTR_MAYBE_NULL is applicable: PTR_TO_XDP_SOCK and PTR_TO_BUF.
In order to remain backward compatible, and assuming that only
comparison between pointers of the same type makes sense,
this commit extends reg_not_null(). W/o such an extension e.g.
verifier_jeq_infer_not_null/null_ptr_to_map_value fails.
reg_not_null() can be extended further, but I deem that out of scope
for the fix at hand. Explicit base_type(...) != PTR_TO_BTF_ID
checks in the check_cond_jmp_op() can be removed with migration to
reg_not_null(), but that is a behavioural change, as the special case
would start matching for PTR_TO_BTF_ID that is also is_trusted_reg().
I omit the behavioural change from this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid sectors_per_cluster in the boot sector
is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field
with a range test that rejects 0x81..0xf3 but accepts 0 and other
non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector():
sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1;
...
vol->cluster_size = vol->sector_size << sectors_per_cluster_bits;
ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the
shift is undefined:
UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39
shift exponent 4294967295 is too large for 32-bit type 'int'
This change rejects any non-power-of-two value, since it feeds the
aforementioned shift via ffs() - 1, which only yields the correct shift for a
power of two. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound $AttrDef table walk to the loaded table size
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry. |
| Out-of-bounds Write in the natural width branch of the text sizing protocol in kitty from 0.40.0 before 0.49.0 allows a program writing to the terminal to write past the end of a fixed-size buffer, because screen_handle_multicell_command() in kitty/screen.c appends each codepoint of a grapheme cluster with lc.chars[lc.count++] = ch without any capacity check, while lc is declared by the RAII_ListOfChars macro as a four-element char_type array in the function's stack frame, so an OSC 66 escape code whose payload carries a grapheme cluster longer than four codepoints writes beyond that buffer, one 32-bit value per additional codepoint, in the order the codepoints appear. Where the cluster is preceded in the same payload by a sequence that causes an intermediate flush, the buffer is first migrated to the heap by ensure_space_for_chars() and the write occurs past the heap allocation instead. This results in termination of the kitty process and therefore of all its windows, tabs and child processes. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in dashbitco lazy_html allows mutation XSS via a parse and serialize round-trip of attacker-supplied HTML.
LazyHTML.to_html/2 and LazyHTML.Tree.to_html/2 decide whether to escape an element's text from its tag name alone. A style or script element inside SVG or MathML foreign content is parsed with character references decoded, but is serialized as an HTML raw-text element, so its text is emitted unescaped. Encoded markup such as </style><img src=x onerror=...> inside <svg><style> therefore closes the element on re-parse and becomes live markup. Applications that parse untrusted HTML with lazy_html, filter the document or tree, and serialize it for display are affected, since the payload is a plain text node that no element or attribute filter sees.
This issue affects lazy_html: from 0.1.0 before 0.1.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
