| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Tumeva Internet Technologies Software Information Advertising and Consulting Services Trade Ltd. Co. Tumeva News Software allows SQL Injection.This issue affects Tumeva News Software: through 17022026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| The Infotainment ECU manufactured by Bosch uses a RH850 module for CAN communication. RH850 is connected to infotainment over the INC interface through a custom protocol. There is a vulnerability during processing requests of this protocol on the V850 side which allows an attacker with code execution on the infotainment main SoC to perform code execution on the RH850 module and subsequently send arbitrary CAN messages over the connected CAN bus.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer
Add DMA buffer readiness check before reading DMA buffer to avoid
unexpected NULL pointer accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221 |
| eNet SMART HOME server 2.2.1 and 2.3.1 contains a missing authorization vulnerability in the deleteUserAccount JSON-RPC method that permits any authenticated low-privileged user (UG_USER) to delete arbitrary user accounts, except for the built-in admin account. The application does not enforce role-based access control on this function, allowing a standard user to submit a crafted POST request to /jsonrpc/management specifying another username to have that account removed without elevated permissions or additional confirmation. |
| Maypole versions from 2.10 through 2.13 for Perl generates session ids insecurely. The session id is seeded with the system time (which is available from HTTP response headers), a call to the built-in rand() function, and the PID. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: r8152: fix resume reset deadlock
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix memory leak in smb2_open_file()
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577 |
| Concierge::Sessions versions from 0.8.1 before 0.8.5 for Perl generate insecure session ids. The generate_session_id function in Concierge::Sessions::Base defaults to using the uuidgen command to generate a UUID, with a fallback to using Perl's built-in rand function. Neither of these methods are secure, and attackers are able to guess session_ids that can grant them access to systems. Specifically,
* There is no warning when uuidgen fails. The software can be quietly using the fallback rand() function with no warnings if the command fails for any reason.
* The uuidgen command will generate a time-based UUID if the system does not have a high-quality random number source, because the call does not explicitly specify the --random option. Note that the system time is shared in HTTP responses.
* UUIDs are identifiers whose mere possession grants access, as per RFC 9562.
* The output of the built-in rand() function is predictable and unsuitable for security applications. |
| Crypt::URandom versions from 0.41 before 0.55 for Perl is vulnerable to a heap buffer overflow in the XS function crypt_urandom_getrandom().
The function does not validate that the length parameter is non-negative. If a negative value (e.g. -1) is supplied, the expression length + 1u causes an integer wraparound, resulting in a zero-byte allocation. The subsequent call to getrandom(data, length, GRND_NONBLOCK) passes the original negative value, which is implicitly converted to a large unsigned value (typically SIZE_MAX). This can result in writes beyond the allocated buffer, leading to heap memory corruption and application crash (denial of service).
In common usage, the length argument is typically hardcoded by the caller, which reduces the likelihood of attacker-controlled exploitation. Applications that pass untrusted input to this parameter may be affected. |
| Emails sent by pretix can utilize placeholders that will be filled with customer data. For example, when {name}
is used in an email template, it will be replaced with the buyer's
name for the final email. This mechanism contained two security-relevant
bugs:
*
It was possible to exfiltrate information about the pretix system through specially crafted placeholder names such as {{event.__init__.__code__.co_filename}}.
This way, an attacker with the ability to control email templates
(usually every user of the pretix backend) could retrieve sensitive
information from the system configuration, including even database
passwords or API keys. pretix does include mechanisms to prevent the usage of such
malicious placeholders, however due to a mistake in the code, they were
not fully effective for the email subject.
*
Placeholders in subjects and plain text bodies of emails were
wrongfully evaluated twice. Therefore, if the first evaluation of a
placeholder again contains a placeholder, this second placeholder was
rendered. This allows the rendering of placeholders controlled by the
ticket buyer, and therefore the exploitation of the first issue as a
ticket buyer. Luckily, the only buyer-controlled placeholder available
in pretix by default (that is not validated in a way that prevents the
issue) is {invoice_company}, which is very unusual (but not
impossible) to be contained in an email subject template. In addition
to broadening the attack surface of the first issue, this could
theoretically also leak information about an order to one of the
attendees within that order. However, we also consider this scenario
very unlikely under typical conditions.
Out of caution, we recommend that you rotate all passwords and API keys contained in your pretix.cfg https://docs.pretix.eu/self-hosting/config/ file. |
| Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat.
When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed.
This issue affects Apache Tomcat Native: from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected.
Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue.
Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue. |
| Improper Input Validation vulnerability.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected.
Tomcat did not validate that the host name provided via the SNI
extension was the same as the host name provided in the HTTP host header
field. If Tomcat was configured with more than one virtual host and the
TLS configuration for one of those hosts did not require client
certificate authentication but another one did, it was possible for a
client to bypass the client certificate authentication by sending
different host names in the SNI extension and the HTTP host header field.
The vulnerability only applies if client certificate authentication is
only enforced at the Connector. It does not apply if client certificate
authentication is enforced at the web application.
Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fix the issue. |
| The Gutenberg Blocks with AI by Kadence WP plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.6.1. This is due to a missing capability check in the `process_image_data_ajax_callback()` function which handles the `kadence_import_process_image_data` AJAX action. The function's authorization check via `verify_ajax_call()` only validates `edit_posts` capability but fails to check for the `upload_files` capability. This makes it possible for authenticated attackers, with Contributor-level access and above, to upload arbitrary images from remote URLs to the WordPress Media Library, bypassing the standard WordPress capability restriction that prevents Contributors from uploading files. |
| The WP-DownloadManager plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.69 via the 'download_path' configuration parameter. This is due to insufficient validation of the download path setting, which allows directory traversal sequences to bypass the WP_CONTENT_DIR prefix check. This makes it possible for authenticated attackers, with Administrator-level access and above, to configure the plugin to list and access arbitrary files on the server by exploiting the file browser functionality. |
| The Private Comment plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Label text' setting in all versions up to, and including, 0.0.4. This is due to insufficient input sanitization and output escaping on the plugin's label text option. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The YayMail – WooCommerce Email Customizer plugin for WordPress is vulnerable to unauthorized license key deletion due to a missing authorization check on the `/yaymail-license/v1/license/delete` REST endpoint in versions up to, and including, 4.3.2. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to delete the plugin's license key via the '/yaymail-license/v1/license/delete' endpoint granted they can obtain the REST API nonce. |
| The PDF Invoices & Packing Slips for WooCommerce plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.0 via the `wpo_ips_edi_save_order_customer_peppol_identifiers` AJAX action due to missing capability checks and order ownership validation. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify Peppol/EDI endpoint identifiers (`peppol_endpoint_id`, `peppol_endpoint_eas`) for any customer by specifying an arbitrary `order_id` parameter on systems using Peppol invoicing. This can affect order routing on the Peppol network and may result in payment disruptions and data leakage. |
