| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't allow journal inode to have encrypt flag
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
A reproducer is:
mkfs.ext4 -F /dev/vdb
debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808"
mount /dev/vdb /mnt -o inlinecrypt
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on destination blkaddr during recovery
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
loop5: detected capacity change from 0 to 131072
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): Bitmap was wrongly set, blk:5634
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198
RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs]
Call Trace:
<TASK>
f2fs_do_replace_block+0xa98/0x1890 [f2fs]
f2fs_replace_block+0xeb/0x180 [f2fs]
recover_data+0x1a69/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
Wei Chen reports a kernel bug as blew:
general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded
In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.
Fix this by checking msg[i].len in az6027_i2c_xfer(). |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: Use kvmalloc/kvfree for larger packets.
When copying a large file over sftp over vsock, data size is usually 32kB,
and kmalloc seems to fail to try to allocate 32 32kB regions.
vhost-5837: page allocation failure: order:4, mode:0x24040c0
Call Trace:
[<ffffffffb6a0df64>] dump_stack+0x97/0xdb
[<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138
[<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8
[<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d
[<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19
[<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb
[<ffffffffb66682f3>] __kmalloc+0x177/0x1f7
[<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d
[<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock]
[<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost]
[<ffffffffb683ddce>] kthread+0xfd/0x105
[<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost]
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
[<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
Work around by doing kvmalloc instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Fix memory leak in vkms_init()
A memory leak was reported after the vkms module install failed.
unreferenced object 0xffff88810bc28520 (size 16):
comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
hex dump (first 16 bytes):
01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............
backtrace:
[<00000000e7561ff8>] kmalloc_trace+0x27/0x60
[<000000000b1954a0>] 0xffffffffc45200a9
[<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
[<000000001505ee87>] do_init_module+0x1a4/0x680
[<00000000958079ad>] load_module+0x6249/0x7110
[<00000000117e4696>] __do_sys_finit_module+0x140/0x200
[<00000000f74b12d2>] do_syscall_64+0x35/0x80
[<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.
vkms_init()
config = kmalloc(...) # config allocated
...
return vkms_create() # vkms_create failed and config is leaked
Fix this problem by checking return value of vkms_create() and free the
config if error happened. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: moxart: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: rtsx_pci: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and calling mmc_free_host() in the
error path, beside, runtime PM also needs be disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: annotate data-races around kcm->rx_wait
kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.
syzbot reported:
BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree
write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1:
reserve_rx_kcm net/kcm/kcmsock.c:283 [inline]
kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0:
kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hibmcge: fix the division by zero issue
When the network port is down, the queue is released, and ring->len is 0.
In debugfs, hbg_get_queue_used_num() will be called,
which may lead to a division by zero issue.
This patch adds a check, if ring->len is 0,
hbg_get_queue_used_num() directly returns 0. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix check for probe enabled in kill_kprobe()
In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be
called always fails. This is because before that we set the
KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always
false.
The disarm_kprobe_ftrace() call introduced by commit:
0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
to fix the NULL pointer reference problem. When the probe is enabled, if
we do not disarm it, this problem still exists.
Fix it by putting the probe enabled check before setting the
KPROBE_FLAG_GONE flag. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: socfpga: Fix memory leak in socfpga_gate_init()
Free @socfpga_clk and @ops on the error path to avoid memory leak issue. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpasim: fix memory leak when freeing IOTLBs
After commit bda324fd037a ("vdpasim: control virtqueue support"),
vdpasim->iommu became an array of IOTLB, so we should clean the
mappings of each free one by one instead of just deleting the ranges
in the first IOTLB which may leak maps. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate BOOT record_size
When the NTFS BOOT record_size field < 0, it represents a
shift value. However, there is no sanity check on the shift result
and the sbi->record_bits calculation through blksize_bits() assumes
the size always > 256, which could lead to NPD while mounting a
malformed NTFS image.
[ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 318.675682] #PF: supervisor read access in kernel mode
[ 318.675869] #PF: error_code(0x0000) - not-present page
[ 318.676246] PGD 0 P4D 0
[ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5
[ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246
[ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080
[ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080
[ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000
[ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000
[ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0
[ 318.685623] Call Trace:
[ 318.686607] <TASK>
[ 318.686872] ? ntfs_alloc_inode+0x1a/0x60
[ 318.687235] attr_load_runs_vcn+0x2b/0xa0
[ 318.687468] mi_read+0xbb/0x250
[ 318.687576] ntfs_iget5+0x114/0xd90
[ 318.687750] ntfs_fill_super+0x588/0x11b0
[ 318.687953] ? put_ntfs+0x130/0x130
[ 318.688065] ? snprintf+0x49/0x70
[ 318.688164] ? put_ntfs+0x130/0x130
[ 318.688256] get_tree_bdev+0x16a/0x260
[ 318.688407] vfs_get_tree+0x20/0xb0
[ 318.688519] path_mount+0x2dc/0x9b0
[ 318.688877] do_mount+0x74/0x90
[ 318.689142] __x64_sys_mount+0x89/0xd0
[ 318.689636] do_syscall_64+0x3b/0x90
[ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 318.690318] RIP: 0033:0x7fd9e133c48a
[ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a
[ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0
[ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020
[ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0
[ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff
[ 318.693007] </TASK>
[ 318.693271] Modules linked in:
[ 318.693614] CR2: 0000000000000158
[ 318.694446] ---[ end trace 0000000000000000 ]---
[ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246
[ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080
[ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080
[ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000
[ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
raw: Fix NULL deref in raw_get_next().
Dae R. Jeong reported a NULL deref in raw_get_next() [0].
It seems that the repro was running these sequences in parallel so
that one thread was iterating on a socket that was being freed in
another netns.
unshare(0x40060200)
r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00')
socket$inet_icmp_raw(0x2, 0x3, 0x1)
pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f)
After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we
use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW
sockets. However, we should use spinlock for slow paths to avoid
the NULL deref.
Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object
is not reused during iteration in the grace period. In fact, the
lockless readers do not check the nulls marker with get_nulls_value().
So, SOCK_RAW should use hlist instead of hlist_nulls.
Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(),
let's convert hlist_nulls to hlist and use sk_for_each_rcu() for
fast paths and sk_for_each() and spinlock for /proc/net/raw.
[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225
seq_read+0x224/0x320 fs/seq_file.c:162
pde_read fs/proc/inode.c:316 [inline]
proc_reg_read+0x23f/0x330 fs/proc/inode.c:328
vfs_read+0x31e/0xd30 fs/read_write.c:468
ksys_pread64 fs/read_write.c:665 [inline]
__do_sys_pread64 fs/read_write.c:675 [inline]
__se_sys_pread64 fs/read_write.c:672 [inline]
__x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x478d29
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011
RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29
RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000
R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740
R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: qcom: Fix potential memory leak
Function dwc3_qcom_probe() allocates memory for resource structure
which is pointed by parent_res pointer. This memory is not
freed. This leads to memory leak. Use stack memory to prevent
memory leak.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds
Commit 56124d6c87fd ("fsverity: support enabling with tree block size <
PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read
the file's data, instead of direct pagecache accesses.
An unintended consequence of this is that the
'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became
reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called
on a fd opened with access mode 3, which means "ioctl access only".
Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But
ioctl-only fds are a weird Linux extension that is rarely used and that
few people even know about. (The documentation for FS_IOC_ENABLE_VERITY
even specifically says it requires O_RDONLY.) It's probably not
worthwhile to make the ioctl internally open a new fd just to handle
this case. Thus, just reject the ioctl on such fds for now. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/resctrl: Clear staged_config[] before and after it is used
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags] |
| Cross-site request forgery vulnerability exists in LogStare Collector. If a user views a crafted page while logged, unintended operations may be performed. |
