| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: don't unpoison huge_zero_folio
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_shrink_slab+0x14f/0x6a0
shrink_slab+0xca/0x8c0
shrink_node+0x2d0/0x7d0
balance_pgdat+0x33a/0x720
kswapd+0x1f3/0x410
kthread+0xd5/0x100
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt. But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.
Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Set run context for rawtp test_run callback
syzbot reported crash when rawtp program executed through the
test_run interface calls bpf_get_attach_cookie helper or any
other helper that touches task->bpf_ctx pointer.
Setting the run context (task->bpf_ctx pointer) for test_run
callback. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: seville: register the mdiobus under devres
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none). |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: felix: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: lantiq_gswip: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path
ip[6]mr_free_table() can only be called under RTNL lock.
RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS: 00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
ops_init+0xaf/0x470 net/core/net_namespace.c:140
setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
copy_process+0x2e0c/0x7300 kernel/fork.c:2167
kernel_clone+0xe7/0xab0 kernel/fork.c:2555
__do_sys_clone+0xc8/0x110 kernel/fork.c:2672
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.
In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8. If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows. And this is common
when user space tries to read the entire EEPROM at once.
To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows. |
| Privilege Escalation in operations API in Canonical LXD <6.5 on multiple platforms allows attacker with read permissions to hijack terminal or console sessions and execute arbitrary commands via WebSocket connection hijacking format |
| Dell Unity, version(s) 5.5 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution. |
| Use of Hard-coded Credentials vulnerability in Logo Software Inc. TigerWings ERP allows Read Sensitive Constants Within an Executable.This issue affects TigerWings ERP: from 01.01.00 before 3.03.00. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc: task_mmu.c: don't read mapcount for migration entry
The syzbot reported the below BUG:
kernel BUG at include/linux/page-flags.h:785!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
Call Trace:
page_mapcount include/linux/mm.h:837 [inline]
smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
walk_pmd_range mm/pagewalk.c:128 [inline]
walk_pud_range mm/pagewalk.c:205 [inline]
walk_p4d_range mm/pagewalk.c:240 [inline]
walk_pgd_range mm/pagewalk.c:277 [inline]
__walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
walk_page_vma+0x277/0x350 mm/pagewalk.c:530
smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
smap_gather_stats fs/proc/task_mmu.c:741 [inline]
show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
seq_read+0x3e0/0x5b0 fs/seq_file.c:162
vfs_read+0x1b5/0x600 fs/read_write.c:479
ksys_read+0x12d/0x250 fs/read_write.c:619
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time. MADV_FREE may split THPs if it is called
for partial THP. It may trigger the below race:
CPU A CPU B
----- -----
smaps walk: MADV_FREE:
page_mapcount()
PageCompound()
split_huge_page()
page = compound_head(page)
PageDoubleMap(page)
When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.
This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.
Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount(). Don't skip getting mapcount
for device private entries since they do track references with mapcount.
Pagemap also has the similar issue although it was not reported. Fixed
it as well.
[shy828301@gmail.com: v4]
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()] |
| SummaryThis advisory addresses a security vulnerability in Mautic related to the segment cloning functionality. This vulnerability allows any authenticated user to clone segments without proper authorization checks.
Insecure Direct Object Reference (IDOR) / Missing Authorization: A missing authorization vulnerability exists in the cloneAction of the segment management. This allows an authenticated user to bypass intended permission restrictions and clone segments even if they lack the necessary permissions to create new ones.
MitigationUpdate Mautic to a version that implements proper authorization checks for the cloneAction within the ListController.php. Ensure that users attempting to clone segments possess the appropriate creation permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix list corruption in perf_cgroup_switch()
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: verify the driver availability for path_event call
If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless. |
| The Fintelligence Calculator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'fintelligence-calculator' shortcode in all versions up to, and including, 1.0.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Customify theme for WordPress is vulnerable to Cross-Site Request Forgery in version 0.4.11. This is due to missing or incorrect nonce validation on the reset_customize_section function. This makes it possible for unauthenticated attackers to reset theme customization settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The ContentMX Content Publisher plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.6. This is due to missing or incorrect nonce validation on the cmx_activate_connection function. This makes it possible for unauthenticated attackers to bind their own ContentMX connection via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix data TLB miss in sba_unmap_sg
Rolf Eike Beer reported the following bug:
[1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018
[1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4
[1274934.746891] Hardware name: 9000/785/C8000
[1274934.746891]
[1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[1274934.746891] PSW: 00001000000001001111111000001110 Not tainted
[1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000
[1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001
[1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001
[1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0
[1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007
[1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001
[1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0
[1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118
[1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800
[1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[1274934.746891]
[1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec
[1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018
[1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff
[1274934.746891] ORIG_R28: 0000000040acdd58
[1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118
[1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118
[1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118
[1274934.746891] Backtrace:
[1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70
[1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60
[1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70
[1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68
[1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278
[1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8
[1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0
[1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70
[1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24
[1274934.746891]
[1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?)
The bug is caused by overrunning the sglist and incorrectly testing
sg_dma_len(sglist) before nents. Normally this doesn't cause a crash,
but in this case sglist crossed a page boundary. This occurs in the
following code:
while (sg_dma_len(sglist) && nents--) {
The fix is simply to test nents first and move the decrement of nents
into the loop. |
