| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: require a peer station for TDLS setup confirm
It's nonsense for the setup confirm to go to station that
doesn't even exist, and it hits a warning when building
the frame:
WARN_ON_ONCE(!sta || !ap_sta)
Only accept WLAN_TDLS_SETUP_CONFIRM when the station is
already there as a TDLS station. Need to copy the call
to ieee80211_tdls_prep_mgmt_packet() since the existing
WLAN_TDLS_DISCOVERY_REQUEST already falls through to it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: follow SMB2 session expiration semantics
ksmbd_session_register() destroys valid sessions after ten seconds of
inactivity whenever a client starts another SessionSetup exchange. This
confuses Session.IdleTime with Session.ExpirationTime. Windows can create
additional authenticated sessions on an existing connection, so deleting
the older session invalidates its tree connects and makes mapped drives
fail with STATUS_NETWORK_NAME_DELETED.
The session expiration rules require the server to change a valid session
to expired only after its credential expiration time passes. A valid or
expired session otherwise keeps its connection from being scavenged.
Connections that have not negotiated a dialect, have no sessions, or have
only InProgress sessions are disconnected after an implementation-specific
timeout. Use the Windows-compatible 45 second value and run the expiration
check periodically for both TCP and SMB Direct.
Keep zero as an infinite credential expiration time, and count each
Valid-to-Expired transition. Set expired sessions to InProgress when they
reauthenticate. If authentication fails, remove the session from the
global and per-connection tables immediately, including SMB3 multichannel
connections.
Retain protection against abandoned SessionId-zero exchanges by allowing
only one InProgress authentication per connection. Additional exchanges
fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are
reaped after the same 45 second setup timeout. This bounds the original
unauthenticated memory-exhaustion path without evicting established
sessions. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Avoid false migration warning for proxy donors
Proxy execution can move a blocked donor's scheduling context to the
lock owner's CPU even when the donor is migration-disabled. The donor
does not execute there, and its original execution CPU remains recorded
in wake_cpu.
set_task_cpu() warns unconditionally for migration-disabled tasks, so a
subsequent proxy migration or the wakeup path returning the donor home
triggers a false positive: moving a blocked scheduling context does not
violate the migration-disabled execution context.
For example, creating a mutex owner on CPU1 and a migration-disabled
waiter on CPU0 can trigger the following warning:
proxy_migrate_repro: donor blocking on CPU0 with migration disabled
proxy_migrate_repro: donor moved from CPU0 to CPU1
WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280
...
Call Trace:
try_to_wake_up+0x43f/0x780
__mutex_unlock_slowpath+0x330/0x540
owner_fn+0x9f/0xc0 [proxy_migrate_repro]
...
proxy_migrate_repro: donor woke on CPU0, task_cpu=0
proxy_migrate_repro: completed
Exclude blocked proxy donors from the warning. The proxy wakeup path
restores an executable placement before clearing the blocked state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: reject unrepresentable espintcp transport headers
ESP-in-TCP can hand xfrm packets whose transport header offset no longer
fits after the stream parser trims the TCP envelope. The plain transport
header reset truncates that offset and triggers the skb warning path.
Use the careful transport-header helper and drop the skb through the
existing XFRM error path when the offset cannot be represented. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
If devm_kcalloc() for rx_chn->flows fails in a channel request function,
the error path calls k3_udma_glue_release_rx_chn(), which dereferences
the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow().
Skip the flow release loop in k3_udma_glue_release_rx_chn() when
rx_chn->flows is not allocated.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node
The setup_cpuhp_and_cpuidle() parses the device tree node for the
interrupt generation block via of_parse_phandle() and decrements its
reference count using of_node_put() immediately after fetching the resource
address. However, later the intr_gen_node pointer is passed into
of_syscon_register_regmap().
Fix this by declaring intr_gen_node with __free() and removing
of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: avoid charging the root memcg from obj_cgroup_charge_pages()
obj_cgroup_charge_pages() resolves the objcg to its memcg and calls
try_charge_memcg(), which does not short circuit the root memcg. That
memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the
objcg was created for and is never updated, while memcg_reparent_objcgs()
does redirect objcg->memcg to the parent on rmdir. An objcg of a dying
child of root therefore passes every obj_cgroup_is_root() filter but
resolves to the root memcg.
Folios keep the objcg they were charged with, so this is easy to reach
through zswap: allocate anon memory in a cgroup, move the task out, remove
the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed
folios are charged through the reparented objcg and end up in
refill_stock() with the root memcg:
WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940
refill_stock+0x644/0x940
try_charge_memcg+0x12d6/0x1570
__obj_cgroup_charge+0x35/0xf0
obj_cgroup_charge+0x1de/0x210
obj_cgroup_charge_zswap+0x83/0x270
zswap_store+0x1620/0x2000
swap_writeout+0x94c/0x14c0
shrink_folio_list+0x3388/0x52b0
[...]
try_to_free_mem_cgroup_pages+0x30d/0x830
user_proactive_reclaim+0x504/0x840
memory_reclaim+0x1f/0x30
Beyond the warning, the charge is asymmetric: obj_cgroup_uncharge_pages()
skips refill_stock() for the root memcg, so the root's page counter grows
and is never uncharged. It is not user visible, since memory.current is
not exposed on the root, but it is a leak.
Use try_charge(), which returns early for the root memcg, restoring the
symmetry with obj_cgroup_uncharge_pages().
The above sequence was scripted into a standalone reproducer (zswap on,
swap on a virtio disk, 512MB of anon memory faulted in inside a child of
the root cgroup, the task then migrated to the root cgroup, the child
removed, followed by "echo 600M swappiness=max > memory.reclaim" on the
root) and run in a CONFIG_DEBUG_VM=y VM. It reproduces the splat on the
first zswap store of a reparented folio, with the same call chain as the
report. With this patch applied the splat is gone while the zswap store
count over the run is unchanged, so the same path is still exercised.
cgroup selftests test_zswap, test_kmem and test_memcontrol show no new
failures. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: always fill AVC decision in avc_has_perm_noaudit()
avc_has_perm_noaudit() is documented to return a copy of the access
decision in @avd, but its early return for an empty requested permission
set leaves the buffer untouched. All callers pass an uninitialized
stack variable and afterwards feed it to avc_audit(), and the inode hook
even stores it in the per-task decision cache.
Fill in a deny-all, audit-all decision, similar to avd_init(), so every
caller receives a defined value at no cost on the hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new()
If memory allocation fails in pwrseq_unit_setup_deps(), pwrseq_unit_put()
is called to release the partially initialized unit. However, we've
never initialized unit->list and pwrseq_unit_release() will
unconditionally call list_del() on it. Initialize unit->list right after
allocating the unit struct. |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: fix NULL-pointer dereference in pwrseq_device_register()
If dev_set_name() fails in pwrseq_device_register(), we jump to the
err_put_pwrseq label before initializing pwrseq->targets.
pwrseq_release() will try to iterate over targets unconditionally and
subsequently dereference an invalid pointer. Move the call to
dev_set_name() after the list head is initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog
da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(),
when the watchdog is left running by the driver sets
WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the
device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be
executed in da9063_wdt_suspend. In this case, the suspend callback is
a no-op and the watchdog keeps counting during system suspend,
leading to an unexpected system reset.
Check WDOG_HW_RUNNING and wdd，can fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: rtd119x: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: rzv2h: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix heap OOB write on key removal
When a key is removed (data == NULL), rsi_hal_load_key() runs:
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
set_key is a struct rsi_set_key *, so the subscript is scaled by
sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is
skb->data + 2560, and the memset writes 144 zero bytes starting
2.4KB past the end of the 160-byte skb data buffer, corrupting
unrelated heap objects. The intended byte offset would have been
(u8 *)set_key + FRAME_DESC_SZ.
The write fires on every DISABLE_KEY callback, so plain disconnects,
roams and interface teardowns trigger it on real networks.
The memset is redundant: the whole buffer is zeroed right after
allocation, so the frame sent to the device is byte-identical
without it. Drop the else branch; normal operation is unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver
ieee80211_set_bitrate_mask() checks if the interface is running via
ieee80211_sdata_running(), but it does not check if the interface is
still present in the driver.
When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the
call reaches drv_set_bitrate_mask() in driver-ops.h which hits
wlan1: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask
Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows
wext_ioctl_dispatch() in wext-core.c dispatching the ioctl, calling
ioctl_standard_call() for SIOCSIWRATE, which calls cfg80211_wext_siwrate()
in wext-compat.c. That builds a bitrate mask and calls
rdev_set_bitrate_mask() which ends up in ieee80211_set_bitrate_mask() in
cfg.c. The interface is marked running via SDATA_STATE_RUNNING but
flags is 0, so check_sdata_in_driver() fails.
When the interface is being torn down, or when wext ioctl is issued
during interface bringup before drv_add_interface() sets IN_DRIVER, the
running check passes while IN_DRIVER is clear.
Check IEEE80211_SDATA_IN_DRIVER in ieee80211_set_bitrate_mask() before
calling the driver, returning -ENETDOWN. This avoids the WARN_ONCE in
driver-ops.h and matches other cfg.c operations that bail early when not
in driver.
This change should be safe because wiphy mutex is held in
cfg80211_wext_siwrate() via guard(wiphy), and IN_DRIVER is set/cleared
under RTNL and wiphy paths in drv_add_interface() and
drv_remove_interface() in driver-ops.c, so the check is race-free
against driver add/remove. Returning -ENETDOWN is the same error other
not-running paths use and does not introduce new locking.
[also add second syzbot report] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix missing iov bounds check in parse_posix_sids()
In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied
out_len without being validated against the actual length of the received
iov (iov_len).
If a server provides an inflated out_len, sidsbuf_end will point past the
end of the iov. This defeats the bounds guards in posix_info_sid_size(),
allowing out-of-bounds reads into adjacent kernel memory.
Fix this by rejecting responses where the calculated sidsbuf_end would
exceed the received iov boundaries or cause pointer wraparound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create()
Smatch complains that returning a NULL here will lead to a NULL pointer
dereference in drm_mode_addfb2(). Return an error pointer instead. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/boot: Avoid IPL parameter append past command line
A command line may occupy all but the terminating byte of
COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size
to the IPL parameter conversion helpers and points the destination one
byte past early_command_line. The helpers subtract one from the unsigned
size and write the converted parameter outside the command line buffer.
Convert the IPL parameter in the command line parsing buffer first. A
parameter beginning with '=' can then replace the existing command line
regardless of its length, while other parameters are appended only when
space remains. |
| In the Linux kernel, the following vulnerability has been resolved:
net: icmp: avoid invalid transport header access in icmp_send tracepoint
syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE():
WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline]
WARNING: at udp_hdr include/linux/udp.h:23 [inline]
WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
Call trace:
skb_transport_header include/linux/skbuff.h:3087 [inline]
udp_hdr include/linux/udp.h:23 [inline]
do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
__traceiter_icmp_send include/trace/events/icmp.h:11 [inline]
__do_trace_icmp_send include/trace/events/icmp.h:11 [inline]
trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11
__icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013
ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline]
ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287
dst_link_failure include/net/dst.h:438 [inline]
vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307
TP_fast_assign() unconditionally calls udp_hdr(skb) before checking
whether the packet is UDP. Furthermore, __icmp_send() can be invoked
from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET)
where skb->transport_header was never initialized (~0U).
Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)).
Fix this by:
1. Only parsing transport info when iph->protocol == IPPROTO_UDP.
2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl << 2)
to safely fetch the UDP header without assuming transport_header is set. |
