| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: handle RST lookup error correctly
[BUG]
When running btrfs/060 with forced RST feature, it would crash the
following ASSERT() inside scrub_read_endio():
ASSERT(sector_nr < stripe->nr_sectors);
Before that, we would have tree dump from
btrfs_get_raid_extent_offset(), as we failed to find the RST entry for
the range.
[CAUSE]
Inside scrub_submit_extent_sector_read() every time we allocated a new
bbio we immediately called btrfs_map_block() to make sure there was some
RST range covering the scrub target.
But if btrfs_map_block() fails, we immediately call endio for the bbio,
while the bbio is newly allocated, it's completely empty.
Then inside scrub_read_endio(), we go through the bvecs to find
the sector number (as bi_sector is no longer reliable if the bio is
submitted to lower layers).
And since the bio is empty, such bvecs iteration would not find any
sector matching the sector, and return sector_nr == stripe->nr_sectors,
triggering the ASSERT().
[FIX]
Instead of calling btrfs_map_block() after allocating a new bbio, call
btrfs_map_block() first.
Since our only objective of calling btrfs_map_block() is only to update
stripe_len, there is really no need to do that after btrfs_alloc_bio().
This new timing would avoid the problem of handling empty bbio
completely, and in fact fixes a possible race window for the old code,
where if the submission thread is the only owner of the pending_io, the
scrub would never finish (since we didn't decrease the pending_io
counter).
Although the root cause of RST lookup failure still needs to be
addressed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: incorrect percpu area handling under softirq
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions between 2.1.0 and 2.14.19, 3.2.0-rc1, 3.1.0-rc1 through 3.1.7, and 3.0.0-rc1 through 3.0.18 contain a race condition in the repository credentials handler that can cause the Argo CD server to panic and crash when concurrent operations are performed on the same repository URL. The vulnerability is located in numerous repository related handlers in the util/db/repository_secrets.go file. A valid API token with repositories resource permissions (create, update, or delete actions) is required to trigger the race condition. This vulnerability causes the entire Argo CD server to crash and become unavailable. Attackers can repeatedly and continuously trigger the race condition to maintain a denial-of-service state, disrupting all GitOps operations. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19. |
| Quadient DS-700 iQ devices through 2025-09-30 might have a race condition during the quick clicking of (in order) the Question Mark button, the Help Button, the About button, and the Help Button, leading to a transition out of kiosk mode into local administrative access. NOTE: the reporter indicates that the "behavior was observed sporadically" during "limited time on the client site," making it not "possible to gain more information about the specific kiosk mode crashing issue," and the only conclusion was "there appears to be some form of race condition." Accordingly, there can be doubt that a reproducible cybersecurity vulnerability was identified; sporadic software crashes can also be caused by a hardware fault on a single device (for example, transient RAM errors). The reporter also describes a variety of other issues, including initial access via USB because of the absence of a "lock-pick resistant locking solution for the External Controller PC cabinet," which is not a cybersecurity vulnerability (section 4.1.5 of the CNA Operational Rules). Finally, it is unclear whether the device or OS configuration was inappropriate, given that the risks are typically limited to insider threats within the mail operations room of a large company. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cca6 ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure. |
| APTIOV contains a vulnerability in BIOS where a skilled user may cause “Race Condition” by local access. A successful exploitation of this vulnerability may lead to resource exhaustion and impact Confidentiality, Integrity, and Availability. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
KCSAN reports a data race when access the krcp->monitor_work.timer.expires
variable in the schedule_delayed_monitor_work() function:
<snip>
BUG: KCSAN: data-race in __mod_timer / kvfree_call_rcu
read to 0xffff888237d1cce8 of 8 bytes by task 10149 on cpu 1:
schedule_delayed_monitor_work kernel/rcu/tree.c:3520 [inline]
kvfree_call_rcu+0x3b8/0x510 kernel/rcu/tree.c:3839
trie_update_elem+0x47c/0x620 kernel/bpf/lpm_trie.c:441
bpf_map_update_value+0x324/0x350 kernel/bpf/syscall.c:203
generic_map_update_batch+0x401/0x520 kernel/bpf/syscall.c:1849
bpf_map_do_batch+0x28c/0x3f0 kernel/bpf/syscall.c:5143
__sys_bpf+0x2e5/0x7a0
__do_sys_bpf kernel/bpf/syscall.c:5741 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5739 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5739
x64_sys_call+0x2625/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffff888237d1cce8 of 8 bytes by task 56 on cpu 0:
__mod_timer+0x578/0x7f0 kernel/time/timer.c:1173
add_timer_global+0x51/0x70 kernel/time/timer.c:1330
__queue_delayed_work+0x127/0x1a0 kernel/workqueue.c:2523
queue_delayed_work_on+0xdf/0x190 kernel/workqueue.c:2552
queue_delayed_work include/linux/workqueue.h:677 [inline]
schedule_delayed_monitor_work kernel/rcu/tree.c:3525 [inline]
kfree_rcu_monitor+0x5e8/0x660 kernel/rcu/tree.c:3643
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3310
worker_thread+0x51d/0x6f0 kernel/workqueue.c:3391
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 56 Comm: kworker/u8:4 Not tainted 6.12.0-rc2-syzkaller-00050-g5b7c893ed5ed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_unbound kfree_rcu_monitor
<snip>
kfree_rcu_monitor() rearms the work if a "krcp" has to be still
offloaded and this is done without holding krcp->lock, whereas
the kvfree_call_rcu() holds it.
Fix it by acquiring the "krcp->lock" for kfree_rcu_monitor() so
both functions do not race anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine starts
Enqueue packets in dql after dma engine starts causes race condition.
Tx transfer starts once dma engine is started and may execute dql dequeue
in completion before it gets queued. It results in following kernel crash
while running iperf stress test:
kernel BUG at lib/dynamic_queue_limits.c:99!
<snip>
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
pc : dql_completed+0x238/0x248
lr : dql_completed+0x3c/0x248
Call trace:
dql_completed+0x238/0x248
axienet_dma_tx_cb+0xa0/0x170
xilinx_dma_do_tasklet+0xdc/0x290
tasklet_action_common+0xf8/0x11c
tasklet_action+0x30/0x3c
handle_softirqs+0xf8/0x230
<snip>
Start dmaengine after enqueue in dql fixes the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix race when converting group handle to group object
XArray provides it's own internal lock which protects the internal array
when entries are being simultaneously added and removed. However there
is still a race between retrieving the pointer from the XArray and
incrementing the reference count.
To avoid this race simply hold the internal XArray lock when
incrementing the reference count, this ensures there cannot be a racing
call to xa_erase(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already. |
| In the Linux kernel, the following vulnerability has been resolved:
fgraph: Add READ_ONCE() when accessing fgraph_array[]
In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[]
elements, which are fgraph_ops. The loop checks if an element is a
fgraph_stub to prevent using a fgraph_stub afterward.
However, if the compiler reloads fgraph_array[] after this check, it might
race with an update to fgraph_array[] that introduces a fgraph_stub. This
could result in the stub being processed, but the stub contains a null
"func_hash" field, leading to a NULL pointer dereference.
To ensure that the gops compared against the fgraph_stub matches the gops
processed later, add a READ_ONCE(). A similar patch appears in commit
63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]"). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Prevent recovery invocation during probe and resume
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC
There is a small race window at snd_pcm_oss_sync() that is called from
OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls
snd_pcm_oss_make_ready() at first, then takes the params_lock mutex
for the rest. When the stream is set up again by another thread
between them, it leads to inconsistency, and may result in unexpected
results such as NULL dereference of OSS buffer as a fuzzer spotted
recently.
The fix is simply to cover snd_pcm_oss_make_ready() call into the same
params_lock mutex with snd_pcm_oss_make_ready_locked() variant. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Fix data races in proc_douintvec().
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side. For now, proc_douintvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Fix data races in proc_douintvec_minmax().
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_douintvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_douintvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side. |
| In the Linux kernel, the following vulnerability has been resolved:
cipso: Fix data-races around sysctl.
While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: Fix data-races around sysctl.
While reading icmp sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix a data-race around sysctl_fib_sync_mem.
While reading sysctl_fib_sync_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid a data-race. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Fix data-races in proc_dou8vec_minmax().
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: Fix data-races around sysctl_icmp_echo_enable_probe.
While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers. |
