| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Be stricter about IO mapping flags
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET,
panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear
VM_MAYWRITE. That means userspace can use mprotect() to make the mapping
writable later on. This is a classic Linux driver gotcha.
I don't think this actually has any impact in practice:
When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and
when the GPU is not powered, the dummy_latest_flush page provided by the
driver is deliberately designed to not do any flushes, so the only thing
writing to the dummy_latest_flush could achieve would be to make *more*
flushes happen.
2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are
mappings without the VM_SHARED flag).
MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has
copy-on-write semantics, which for VM_PFNMAP are semi-supported but
fairly cursed.
In particular, in such a mapping, the driver can only install PTEs
during mmap() by calling remap_pfn_range() (because remap_pfn_range()
wants to **store the physical address of the mapped physical memory into
the vm_pgoff of the VMA**); installing PTEs later on with a fault
handler (as panthor does) is not supported in private mappings, and so
if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when
it hits a BUG() check.
Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID
doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for
the FLUSH_ID don't make sense).
Reproducers for both scenarios are in the notes of my patch on the mailing
list; I tested that these bugs exist on a Rock 5B machine.
Note that I only compile-tested the patch, I haven't tested it; I don't
have a working kernel build setup for the test machine yet. Please test it
before applying it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create
Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64.
However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16.
This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16],
resulting in kmem_buckets_create() attempting to create a kmem_cache for
size 16 twice. This duplication triggers warnings on boot:
[ 2.325108] ------------[ cut here ]------------
[ 2.325135] kmem_cache of name 'memdup_user-16' already exists
[ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0
[ 2.327957] Modules linked in:
[ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12
[ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024
[ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0
[ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0
[ 2.328942] sp : ffff800083d6fc50
[ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598
[ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000
[ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388
[ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030
[ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120
[ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000
[ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 2.329291] Call trace:
[ 2.329407] __kmem_cache_create_args+0xb8/0x3b0
[ 2.329499] kmem_buckets_create+0xfc/0x320
[ 2.329526] init_user_buckets+0x34/0x78
[ 2.329540] do_one_initcall+0x64/0x3c8
[ 2.329550] kernel_init_freeable+0x26c/0x578
[ 2.329562] kernel_init+0x3c/0x258
[ 2.329574] ret_from_fork+0x10/0x20
[ 2.329698] ---[ end trace 0000000000000000 ]---
[ 2.403704] ------------[ cut here ]------------
[ 2.404716] kmem_cache of name 'msg_msg-16' already exists
[ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0
[ 2.404842] Modules linked in:
[ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12
[ 2.405026] Tainted: [W]=WARN
[ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024
[ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0
[ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0
[ 2.405111] sp : ffff800083d6fc50
[ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598
[ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000
[ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388
[ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030
[ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120
[ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000
[ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 2.405287] Call trace:
[ 2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: mgb4: protect driver against spectre
Frequency range is set from sysfs via frequency_range_store(),
being vulnerable to spectre, as reported by smatch:
drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r]
drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set'
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof
'modprobe slub_kunit' will have a warning as shown below. The root cause
is that __kmalloc_cache_noprof was directly used, which resulted in no
alloc_tag being allocated. This caused current->alloc_tag to be null,
leading to a warning in alloc_tag_add_check.
Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically
within lib/slub_kunit.c, which is the only user of this internal slub
function outside kmalloc implementation itself.
[58162.947016] WARNING: CPU: 2 PID: 6210 at
./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c
[58162.957721] Call trace:
[58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c
[58162.958286] __kmalloc_cache_noprof+0x14c/0x344
[58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit]
[58162.959045] kunit_try_run_case+0x74/0x184 [kunit]
[58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit]
[58162.959841] kthread+0x10c/0x118
[58162.960093] ret_from_fork+0x10/0x20
[58162.960363] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash on probe for DPLL enabled E810 LOM
The E810 Lan On Motherboard (LOM) design is vendor specific. Intel
provides the reference design, but it is up to vendor on the final
product design. For some cases, like Linux DPLL support, the static
values defined in the driver does not reflect the actual LOM design.
Current implementation of dpll pins is causing the crash on probe
of the ice driver for such DPLL enabled E810 LOM designs:
WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330
...
Call Trace:
<TASK>
? __warn+0x83/0x130
? dpll_pin_get+0x2c4/0x330
? report_bug+0x1b7/0x1d0
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? dpll_pin_get+0x117/0x330
? dpll_pin_get+0x2c4/0x330
? dpll_pin_get+0x117/0x330
ice_dpll_get_pins.isra.0+0x52/0xe0 [ice]
...
The number of dpll pins enabled by LOM vendor is greater than expected
and defined in the driver for Intel designed NICs, which causes the crash.
Prevent the crash and allow generic pin initialization within Linux DPLL
subsystem for DPLL enabled E810 LOM designs.
Newly designed solution for described issue will be based on "per HW
design" pin initialization. It requires pin information dynamically
acquired from the firmware and is already in progress, planned for
next-tree only. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: imx8ulp: correct the flexspi compatible string
The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has
32 LUTs, so correct the compatible string here, otherwise will
meet below error:
[ 1.119072] ------------[ cut here ]------------
[ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64
[ 1.133239] Modules linked in:
[ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69
[ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT)
[ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64
[ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64
[ 1.168060] sp : ffff80008002b2a0
[ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000
[ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000
[ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0
[ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff
[ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002
[ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00
[ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80
[ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001
[ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6
[ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92
[ 1.246267] Call trace:
[ 1.248824] nxp_fspi_exec_op+0xb04/0xb64
[ 1.253031] spi_mem_exec_op+0x3a0/0x430
[ 1.257139] spi_nor_read_id+0x80/0xcc
[ 1.261065] spi_nor_scan+0x1ec/0xf10
[ 1.264901] spi_nor_probe+0x108/0x2fc
[ 1.268828] spi_mem_probe+0x6c/0xbc
[ 1.272574] spi_probe+0x84/0xe4
[ 1.275958] really_probe+0xbc/0x29c
[ 1.279713] __driver_probe_device+0x78/0x12c
[ 1.284277] driver_probe_device+0xd8/0x15c
[ 1.288660] __device_attach_driver+0xb8/0x134
[ 1.293316] bus_for_each_drv+0x88/0xe8
[ 1.297337] __device_attach+0xa0/0x190
[ 1.301353] device_initial_probe+0x14/0x20
[ 1.305734] bus_probe_device+0xac/0xb0
[ 1.309752] device_add+0x5d0/0x790
[ 1.313408] __spi_add_device+0x134/0x204
[ 1.317606] of_register_spi_device+0x3b4/0x590
[ 1.322348] spi_register_controller+0x47c/0x754
[ 1.327181] devm_spi_register_controller+0x4c/0xa4
[ 1.332289] nxp_fspi_probe+0x1cc/0x2b0
[ 1.336307] platform_probe+0x68/0xc4
[ 1.340145] really_probe+0xbc/0x29c
[ 1.343893] __driver_probe_device+0x78/0x12c
[ 1.348457] driver_probe_device+0xd8/0x15c
[ 1.352838] __driver_attach+0x90/0x19c
[ 1.356857] bus_for_each_dev+0x7c/0xdc
[ 1.360877] driver_attach+0x24/0x30
[ 1.364624] bus_add_driver+0xe4/0x208
[ 1.368552] driver_register+0x5c/0x124
[ 1.372573] __platform_driver_register+0x28/0x34
[ 1.377497] nxp_fspi_driver_init+0x1c/0x28
[ 1.381888] do_one_initcall+0x80/0x1c8
[ 1.385908] kernel_init_freeable+0x1c4/0x28c
[ 1.390472] kernel_init+0x20/0x1d8
[ 1.394138] ret_from_fork+0x10/0x20
[ 1.397885] ---[ end trace 0000000000000000 ]---
[ 1.407908] ------------[ cut here ]------------ |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: dapm: fix bounds checker error in dapm_widget_list_create
The widgets array in the snd_soc_dapm_widget_list has a __counted_by
attribute attached to it, which points to the num_widgets variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of the widgets list calculated with
list_for_each as the initial value for num_widgets as it is used for
allocating memory for the array. It is updated with the actual number of
added elements after the array is filled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext()
This command:
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: block dev insert failed: -EBUSY.
fails because user space requests the same block index to be set for
both ingress and egress.
[ side note, I don't think it even failed prior to commit 913b47d3424e
("net/sched: Introduce tc block netdev tracking infra"), because this
is a command from an old set of notes of mine which used to work, but
alas, I did not scientifically bisect this ]
The problem is not that it fails, but rather, that the second time
around, it fails differently (and irrecoverably):
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: dsa_core: Flow block cb is busy.
[ another note: the extack is added by me for illustration purposes.
the context of the problem is that clsact_init() obtains the same
&q->ingress_block pointer as &q->egress_block, and since we call
tcf_block_get_ext() on both of them, "dev" will be added to the
block->ports xarray twice, thus failing the operation: once through
the ingress block pointer, and once again through the egress block
pointer. the problem itself is that when xa_insert() fails, we have
emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the
offload never sees a corresponding FLOW_BLOCK_UNBIND. ]
Even correcting the bad user input, we still cannot recover:
$ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact
Error: dsa_core: Flow block cb is busy.
Basically the only way to recover is to reboot the system, or unbind and
rebind the net device driver.
To fix the bug, we need to fill the correct error teardown path which
was missed during code movement, and call tcf_block_offload_unbind()
when xa_insert() fails.
[ last note, fundamentally I blame the label naming convention in
tcf_block_get_ext() for the bug. The labels should be named after what
they do, not after the error path that jumps to them. This way, it is
obviously wrong that two labels pointing to the same code mean
something is wrong, and checking the code correctness at the goto site
is also easier ] |
| In the Linux kernel, the following vulnerability has been resolved:
resource,kexec: walk_system_ram_res_rev must retain resource flags
walk_system_ram_res_rev() erroneously discards resource flags when passing
the information to the callback.
This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have
these resources selected during kexec to store kexec buffers if that
memory happens to be at placed above normal system ram.
This leads to undefined behavior after reboot. If the kexec buffer is
never touched, nothing happens. If the kexec buffer is touched, it could
lead to a crash (like below) or undefined behavior.
Tested on a system with CXL memory expanders with driver managed memory,
TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags
were being discarded and as a result the check for
IORESOURCE_SYSRAM_DRIVER_MANAGED passes.
find_next_iomem_res: name(System RAM (kmem))
start(10000000000)
end(1034fffffff)
flags(83000200)
locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0)
[.] BUG: unable to handle page fault for address: ffff89834ffff000
[.] #PF: supervisor read access in kernel mode
[.] #PF: error_code(0x0000) - not-present page
[.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0
[.] Oops: 0000 [#1] SMP
[.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0
[.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286
[.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000
[.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018
[.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900
[.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000
[.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000
[.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000
[.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[.] ata5: SATA link down (SStatus 0 SControl 300)
[.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0
[.] PKRU: 55555554
[.] Call Trace:
[.] <TASK>
[.] ? __die+0x78/0xc0
[.] ? page_fault_oops+0x2a8/0x3a0
[.] ? exc_page_fault+0x84/0x130
[.] ? asm_exc_page_fault+0x22/0x30
[.] ? ima_restore_measurement_list+0x95/0x4b0
[.] ? template_desc_init_fields+0x317/0x410
[.] ? crypto_alloc_tfm_node+0x9c/0xc0
[.] ? init_ima_lsm+0x30/0x30
[.] ima_load_kexec_buffer+0x72/0xa0
[.] ima_init+0x44/0xa0
[.] __initstub__kmod_ima__373_1201_init_ima7+0x1e/0xb0
[.] ? init_ima_lsm+0x30/0x30
[.] do_one_initcall+0xad/0x200
[.] ? idr_alloc_cyclic+0xaa/0x110
[.] ? new_slab+0x12c/0x420
[.] ? new_slab+0x12c/0x420
[.] ? number+0x12a/0x430
[.] ? sysvec_apic_timer_interrupt+0xa/0x80
[.] ? asm_sysvec_apic_timer_interrupt+0x16/0x20
[.] ? parse_args+0xd4/0x380
[.] ? parse_args+0x14b/0x380
[.] kernel_init_freeable+0x1c1/0x2b0
[.] ? rest_init+0xb0/0xb0
[.] kernel_init+0x16/0x1a0
[.] ret_from_fork+0x2f/0x40
[.] ? rest_init+0xb0/0xb0
[.] ret_from_fork_asm+0x11/0x20
[.] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
A recent change in the venus driver results in a stuck clock on the
Lenovo ThinkPad X13s, for example, when streaming video in firefox:
video_cc_mvs0_clk status stuck at 'off'
WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c
...
Call trace:
clk_branch_wait+0x144/0x15c
clk_branch2_enable+0x30/0x40
clk_core_enable+0xd8/0x29c
clk_enable+0x2c/0x4c
vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core]
coreid_power_v4+0x464/0x628 [venus_core]
vdec_start_streaming+0xc4/0x510 [venus_dec]
vb2_start_streaming+0x6c/0x180 [videobuf2_common]
vb2_core_streamon+0x120/0x1dc [videobuf2_common]
vb2_streamon+0x1c/0x6c [videobuf2_v4l2]
v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem]
v4l_streamon+0x24/0x30 [videodev]
using the out-of-tree sm8350/sc8280xp venus support. [1]
Update also the sm8350/sc8280xp GDSC definitions so that the hw control
mode can be changed at runtime as the venus driver now requires. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the validity of nr_words in bpf_iter_bits_new()
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem,
on huge=always tmpfs, issues a warning and then hangs (interruptibly):
WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9
CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2
...
copy_page_from_iter_atomic+0xa6/0x5ec
generic_perform_write+0xf6/0x1b4
shmem_file_write_iter+0x54/0x67
Fix copy_page_from_iter_atomic() by limiting it in that case
(include/linux/skbuff.h skb_frag_must_loop() does similar).
But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too
surprising, has outlived its usefulness, and should just be removed? |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't try and remove empty rbtree node
When copying a namespace we won't have added the new copy into the
namespace rbtree until after the copy succeeded. Calling free_mnt_ns()
will try to remove the copy from the rbtree which is invalid. Simply
free the namespace skeleton directly. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
Use raw_smp_processor_id() instead of plain smp_processor_id() in
do_service_request(), otherwise we may get some errors with the driver
enabled:
BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208
caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq] |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: Remove use_count guard in stop_streaming
The use_count check was introduced so that multiple concurrent Raw Data
Interfaces RDIs could be driven by different virtual channels VCs on the
CSIPHY input driving the video pipeline.
This is an invalid use of use_count though as use_count pertains to the
number of times a video entity has been opened by user-space not the number
of active streams.
If use_count and stream-on count don't agree then stop_streaming() will
break as is currently the case and has become apparent when using CAMSS
with libcamera's released softisp 0.3.
The use of use_count like this is a bit hacky and right now breaks regular
usage of CAMSS for a single stream case. Stopping qcam results in the splat
below, and then it cannot be started again and any attempts to do so fails
with -EBUSY.
[ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
...
[ 1265.510630] Call trace:
[ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
[ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common]
[ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2]
[ 1265.510673] v4l_streamoff+0x24/0x30 [videodev]
[ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev]
[ 1265.510732] video_usercopy+0x304/0x8c4 [videodev]
[ 1265.510757] video_ioctl2+0x18/0x34 [videodev]
[ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev]
...
[ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state
[ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state
[ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st
One CAMSS specific way to handle multiple VCs on the same RDI might be:
- Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx.
- The video buffers are already associated with msm_vfeN_rdiX so
release video buffers when told to do so by stop_streaming.
- Only release the power-domains for the CSIPHY, CSID and VFE when
their internal refcounts drop.
Either way refusing to release video buffers based on use_count is
erroneous and should be reverted. The silicon enabling code for selecting
VCs is perfectly fine. Its a "known missing feature" that concurrent VCs
won't work with CAMSS right now.
Initial testing with this code didn't show an error but, SoftISP and "real"
usage with Google Hangouts breaks the upstream code pretty quickly, we need
to do a partial revert and take another pass at VCs.
This commit partially reverts commit 89013969e232 ("media: camss: sm8250:
Pipeline starting and stopping for multiple virtual channels") |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Update rx_bytes on read_skb()
Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt()
calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after
vsock_transport::read_skb().
While here, also inform the peer that we've freed up space and it has more
credit.
Failing to update rx_bytes after packet is dequeued leads to a warning on
SOCK_STREAM recv():
[ 233.396654] rx_queue is empty, but rx_bytes is non-zero
[ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: fix unbalanced rpm put() with fence_fini()
Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.
There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.
v2 (Matt B):
- Prefer warning if we detect double fini()
(cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183) |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Disable page allocation in task_tick_mm_cid()
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix shift-out-of-bounds bug
Fix a shift-out-of-bounds bug reported by UBSAN when running
VM with MTE enabled host kernel.
UBSAN: shift-out-of-bounds in arch/arm64/kvm/sys_regs.c:1988:14
shift exponent 33 is too large for 32-bit type 'int'
CPU: 26 UID: 0 PID: 7629 Comm: qemu-kvm Not tainted 6.12.0-rc2 #34
Hardware name: IEI NF5280R7/Mitchell MB, BIOS 00.00. 2024-10-12 09:28:54 10/14/2024
Call trace:
dump_backtrace+0xa0/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x74/0x90
dump_stack+0x18/0x28
__ubsan_handle_shift_out_of_bounds+0xf8/0x1e0
reset_clidr+0x10c/0x1c8
kvm_reset_sys_regs+0x50/0x1c8
kvm_reset_vcpu+0xec/0x2b0
__kvm_vcpu_set_target+0x84/0x158
kvm_vcpu_set_target+0x138/0x168
kvm_arch_vcpu_ioctl_vcpu_init+0x40/0x2b0
kvm_arch_vcpu_ioctl+0x28c/0x4b8
kvm_vcpu_ioctl+0x4bc/0x7a8
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x70/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x194/0x198 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix warning when destroy 'cifs_io_request_pool'
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'. |
