| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: Reset positive result codes to zero in object map update path
In a reply message to an RBD request, a positive result code indicates
a data payload, which is not allowed for writes. While
rbd_osd_req_callback() already resets a positive result code for writes
to zero, rbd_object_map_callback() does not. This allows a corrupted
reply to an object map update to trigger the rbd_assert(*result < 0) in
__rbd_obj_handle_request(). This happens, because
rbd_object_map_callback() calls rbd_obj_handle_request() ->
__rbd_obj_handle_request() and passes this positive result code. From
__rbd_obj_handle_request(), rbd_obj_advance_write() is called, which
leaves the positive result code unchanged and returns true. Therefore,
the if(done && *result) branch is executed in __rbd_obj_handle_request()
and the assertion triggers.
This patch fixes the issue by adjusting the logic in the
rbd_object_map_callback() path. A positive result code for an object map
update is now reset to zero (similar to rbd_osd_req_callback()), and the
message is subsequently handled the same way as if the result code was
zero from the beginning. Additionally, a WARN_ON_ONCE() is added for
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
super: fix emergency thaw deadlock on frozen block devices
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback(). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add global mutex to serialize trace_parser access
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph_x_create_authorizer() caches au->buf->vec.iov_base and
au->buf->vec.iov_len in struct ceph_auth_handshake. These
cached values are then used by the messenger connect code when
sending the authorizer.
ceph_x_update_authorizer() can rebuild the authorizer when a newer
service ticket is available. If the rebuilt authorizer no longer
fits in the existing buffer, ceph_x_build_authorizer() drops its
reference to au->buf and allocates a new one. If this is the final
reference, ceph_buffer_put() frees the old ceph_buffer and its
vec.iov_base, but auth->authorizer_buf still points at that freed
memory.
A subsequent msgr1 reconnect can therefore queue the stale pointer
and trigger a KASAN slab-use-after-free in _copy_from_iter() while
tcp_sendmsg() copies the authorizer.
Refresh auth->authorizer_buf and auth->authorizer_buf_len after a
successful authorizer rebuild so the messenger sends the current
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Move src_buf Removal to finish_encode
During encoder processing, there is a case where the IRQ response could
return the buffer back to userspace via v4l2_m2m_buf_done call. In this
time, userspace could queue up this same buffer before start_encode removes
the index from the ready queue. This would then lead to a case where the
buffer in the ready queue could be a self loop due to the
WRITE_ONCE(prev->next, new) call in __list_add.
When __list_del is finally called, the loop is already made so nothing
points back to ready queue list head and pointers are poisoned.
A buffer should not be marked as DONE before the buffer is removed from
m2m ready queue. Move removal entirely to finish_encode. |
| In the Linux kernel, the following vulnerability has been resolved:
media: airspy: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clear_bit label, which already drains s->queued_bufs via
vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/mst: limit DP MST ESI service loop
The loop in intel_dp_check_mst_status() keeps servicing interrupts
originating from the sink without bound. Add an upper bound to the new
interrupts occurring during interrupt processing to not get stuck on
potentially stuck sink devices. Use arbitrary 32 tries to clear incoming
interrupts in one go.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Note: The condition likely pre-dates the commit in the Fixes: tag, but
this is about as far back as a backport has any chance of
succeeding. Before that, the retry had a goto.
(cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Fix NULL deref on sched_engine alloc failure
Avoid using intel_context_put() before intel_context_init() in
execlists_create_virtual() as the kref_put() inside would lead
to NULL deref on the IOCTL path when sched_engine allocation fails.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit 4f2a12f2d50e9f48227656e4dcbd6423506be31d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Do not leak siblings[] on proto context error
After a successful BALANCE/PARALLEL_SUBMIT extension on context
creation, error during processing of next user extension leaks
the siblings[] array. Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit aa65e0a4b51b3b54b53e4142aaa2d997aa1061ff) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid()
The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only
valid while the lock is still being held. Once xa_unlock_irqrestore is
called and returned, the pointer is no longer under lock and is subject
to modification. Since, the caller still dereferences vm->task_info in
amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a
use after unlock problem.
Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid()
through removing the amdgpu_vm_get_vm_from_pasid() function from
amdgpu_vm.c and making the relevant code inline to hold the lock while
it is still in use.
(cherry picked from commit 9d01579f3f868b333acc901815972685989092c7) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not try compression for data reloc inodes
[BUG]
There is a syzbot report that the check inside get_new_location()
triggered:
BTRFS info (device loop0): found 31 extents, stage: move data extents
BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607
item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160
inode generation 5 transid 0 size 0 nbytes 0
block group 0 mode 40755 links 1 uid 0 gid 0
rdev 0 sequence 0 flags 0x0
atime 1669132761.0
ctime 1669132761.0
mtime 1669132761.0
otime 0.0
item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12
index 0 name_len 2
item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160
inode generation 1 transid 16 size 733184 nbytes 106496
block group 0 mode 100600 links 0 uid 0 gid 0
rdev 0 sequence 24 flags 0x18
item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68
generation 16 type 0
inline extent data size 47 ram_bytes 4096 compression 1
[...]
item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0
BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337
------------[ cut here ]------------
btrfs_abort_should_print_stack(__error)
[CAUSE]
The above dump tree shows the first file extent item is inlined, which
should make no sense for data reloc inodes, as such inodes just
represent where the data extents are in the relocation destination chunk.
However the relocation path preallocates space for each block,
then dirties them, cluster by cluster.
It's possible to have a single block at the beginning of the block
group, and no other block in the same cluster.
So relocation will preallocate a file extent for that block and dirty
the first block. Then memory pressure forces the data reloc inode to be
written back, before any other blocks are dirtied/allocated.
Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated
delalloc helper") changed the sequence of delalloc. Before that commit we
always tried NOCOW first, so that dirtied block would be written back into
the preallocated space, and appear as a regular extent.
But with that commit, we always try inline first, and since compression
is forced, we try compressing the first block, and then inline the
compressed data, resulting in the above inlined file extent in the data
reloc tree.
Then the check in get_new_location() will check the file offset, without
checking if the file extent is inlined or not, resulting in the above
failure.
[FIX]
Do not allow compression for data reloc inodes.
Since data reloc inode sizes are always block aligned, as long as we do
not compress, @data_len will always be at least one block, and
that will cause can_cow_file_range_inline() to return false, thus no
inlined extent will be created. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: pin the module while the device is open
misc_open() installs a misc driver's file operations with fops_get(),
which pins file_operations::owner before replacing the file's f_op. The
NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does
not take a module reference on the nsm driver.
If the driver is built as a module, an open file descriptor can therefore
survive rmmod of the module that provides its ioctl callbacks. A later
ioctl through that descriptor can call into unloaded module text.
Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module
while any /dev/nsm file descriptor is open, matching the lifetime
expectation for the installed file operations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: close a re-opened queue timer in the destructor
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop()
is a no-op, because running was cleared first. So it frees q->timer with the
instance still live. The queue is freed next.
The instance stays on the global timer with callback_data pointing at the
freed queue. A non-owner START on the unlocked queue arms it. The next tick
derefs the freed queue in snd_seq_timer_interrupt().
Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and
no queue ownership required.
Close any lingering instance in the destructor. There, ->timeri can no
longer change: the queue is unlinked and all use_lock borrowers have
drained, so no snd_seq_queue_use() can re-open it. Close it before clearing
q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt()
to finish, and that callback still reads q->timer (via snd_seq_check_queue()),
so q->timer must stay valid until it drains. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: unregister notifier on probe failure
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
[hverkuil: added Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: dce100: skip non-DP stream encoders for DP MST
On DCE8-class ASICs (e.g. Bonaire), the resource pool contains digital
DIG stream encoders plus one analog DAC encoder. When assigning a stream
encoder for a second DisplayPort MST stream, if the preferred digital
encoder is already acquired, dce100_find_first_free_match_stream_enc_for_link()
falls back to the first free pool entry. That entry may be the analog
encoder, whose funcs table lacks DP hooks such as dp_set_stream_attribute.
The subsequent atomic commit then dereferences NULL function pointers in
link_set_dpms_on() and crashes.
Skip encoders without dp_set_stream_attribute when the stream uses a DP
signal (including MST). Use dc_is_dp_signal(stream->signal) for the MST
fallback path instead of checking only the link connector signal.
Tested on:
- GPU: AMD Radeon R7 260X (Bonaire / DCE8)
- Board: Supermicro C9X299-PG300
- Setup: DP MST daisy chain, hotplug second monitor or have it connected on boot
- Kernel: 7.1.3 (issue observed since 6.19)
- Result: kernel oops without patch; dual monitors stable with patch
(cherry picked from commit 28ec64943e3ee4d9b8d30cea61e380f1429953a8) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: set new_stream to NULL after release
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) |
