| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The GETALL and SETALL commands in semctl(2) recorded the number of semaphores in the target set, dropped the lock protecting the set, allocated a buffer sized for that count, and reacquired the lock. A sequence-number check was used to verify that the set had not been replaced in the interim, but the sequence number wraps after 0x8000 create/destroy cycles. By rapidly destroying and recreating semaphore sets at the same index, another process can cause the sequence number to wrap, allowing a set with a different number of semaphores to pass validation. The subsequent copy then reads or writes past the end of the allocated buffer.
An unprivileged local user can trigger out-of-bounds reads and writes on kernel heap memory, potentially leading to privilege escalation. |
| The ELF core dump code counted the number of dumpable VM map entries, allocated a buffer for the corresponding program headers, then iterated over the map a second time to populate them. A process sharing the address space via rfork(2) can mutate the map between the two passes, causing the second pass to write program headers past the end of the buffer.
An unprivileged local user sharing an address space with a process that dumps core can trigger an out-of-bounds write on the kernel heap, potentially leading to privilege escalation. |
| rclone is a command-line program to sync files and directories to and from different cloud storage providers. Prior to 1.75.0, the shared HTTP CONNECT helper in lib/proxy/http.go parses proxy CONNECT responses with http.ReadResponse over an unrestricted buffered reader, allowing a malicious or compromised configured proxy, or an active on-path actor controlling a plaintext HTTP proxy hop, to send oversized headers that grow memory until the rclone process fails. The affected helper is used by FTP and SFTP proxy connections, and SFTP reaches the parser before SSH server authentication, so target host key validation does not constrain a malicious proxy. This issue is fixed in 1.75.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate external BO copy bounds for both stride paths
vmw_external_bo_copy() trusts caller-supplied offsets, strides, and
heights and operates on imported dma-buf vmaps:
- The equal-stride memcpy() bound was clamped after subtracting the
offsets from dst_size and src_size; an offset larger than the BO
size wraps the unsigned subtraction to a huge value and the
resulting memcpy() runs off the end of the vmap. dst_stride *
height is also a u32 multiplication that can overflow.
- The non-equal-stride row-by-row path had no bound at all. The
loop touches bytes through offset + (height - 1) * stride +
width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes),
and could likewise step past the end of either mapping.
The offsets and strides are derived from STDU/SOU plane state, so a
configured CRTC submitting a crafted atomic commit on an imported
framebuffer can reach this path.
Validate the exact row-copy endpoint against each BO's size up front
using check_mul_overflow() and check_add_overflow(). Use the bulk
memcpy() path only when width_in_bytes covers the whole stride;
otherwise copy one row at a time so partial-row updates near the bottom
of a framebuffer remain valid. Also reject zero strides and stride <
width_in_bytes, both of which the row-by-row path cannot represent
safely. |
| Improper conditions check in the firmware for the Intel(R) NPU Driver for all versions within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: npc: Fix size of entry2cntr_map
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20 |
| Improper conditions check for the Intel(R) NPU Driver for all versions within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Incomplete filtering of special elements in Intel(R) TDX module software before version TDX_1.5.01.00.592 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| The Groundhogg — CRM, Newsletters, and Marketing Automation WordPress plugin before 4.5.13 does not validate or escape values submitted to some optional web form fields before storing them and outputting them back in an administrative area, allowing unauthenticated users to perform Stored Cross-Site Scripting attacks against high privilege users. |
| The Customer Reviews for WooCommerce WordPress plugin before 5.118.0 does not sanitise and escape the content of customer reviews received via one of its endpoints, which could allow unauthenticated users to perform Stored Cross-Site Scripting attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiADC 7.6.0 through 7.6.1, FortiADC 7.4.0 through 7.4.6, FortiADC 7.2.0 through 7.2.7, FortiADC 7.1.0 through 7.1.4, FortiADC 7.0 all versions, FortiADC 6.2 all versions, FortiADC 6.1 all versions, FortiADC 6.0 all versions, FortiADC 5.4 all versions, FortiADC 5.3 all versions, FortiADC 5.2 all versions, FortiADC 5.1 all versions, FortiADC 5.0 all versions, FortiADC 4.8 all versions, FortiADC 4.7 all versions, FortiADC 4.6 all versions, FortiADC 4.5 all versions, FortiADC 4.4 all versions, FortiADC 4.3 all versions, FortiADC 4.2 all versions, FortiADC 4.1 all versions, FortiADC 4.0 all versions, FortiADC 3.2 all versions, FortiADC 3.1 all versions, FortiADC 3.0 all versions may allow attacker to execute unauthorized code or commands via <insert attack vector here> |
| ALOS HTTP is a Linux-first Go web framework and application server built around a custom networking stack. Prior to 0.0.0-20260617230736-314b6783e196, core/utils.go::sanitizeRequestPath calls splitPathQuery on a request path beginning with a question mark and then performs the unchecked p[0] access without checking whether the resulting path is empty. An unauthenticated client can send a malformed request such as a question-mark-only path through h1_plain.go::ParseH1RequestHead, hpack.go::decodeSimpleGetPathHTTPSRequest, hpack.go::observeHeader, or h3_conn.go::handleRequestStream, causing an out-of-bounds panic before core.Recovery() middleware runs and terminating the server process. This issue is fixed in pseudo-version 0.0.0-20260617230736-314b6783e196. |
| @hulumi/baseline versions before 1.3.2 fail to fully detect CloudTrail selector tampering events, reducing audit logging configuration change coverage. Attackers can modify CloudTrail event selectors without complete detection, potentially evading audit trail monitoring. |
| @pdfme/schemas before 5.5.9 contains a cross-site scripting vulnerability in the SVG schema plugin that renders user-supplied SVG content directly to innerHTML without sanitization. Attackers can inject malicious SVG with embedded scripts, event handlers, or foreignObject elements to execute arbitrary JavaScript in users' browsers when viewing or filling templates. |
| A vulnerability was identified in diem-project diem up to 5.1.3. The affected element is the function executeCommand of the file dmAdminPlugin/modules/dmConsole/actions/actions.class.php of the component Administrative Console. Such manipulation of the argument dm_command leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Multiple unbounded alloca() calls in the PulseAudio protocol server. |
| Dell PowerStore SDNAS, contains an Out-of-bounds Write vulnerability in SMB/CIFS. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service and remote execution. This is a Critical vulnerability as a remote user could send a specially crafted SMB packet and cause a crash, that is persistent in case automatic restarts are enabled. Additionally, a more sophisticated attacker could use the same vulnerability for remote code execution. |
| Multiple laser printers and MFPs (multifunction printers) which implement Ricoh Web Image Monitor contain a reflected cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who accesses a crafted URL. |
| The User Profile Builder WordPress plugin before 4.0.1 does not escape the output of one of its optional shortcodes, allowing users with a role as low as contributor to perform Stored Cross-Site Scripting attacks against any user viewing the affected content, including administrators. The shortcode is not enabled by default. |
