| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF mounts the nnef-callback route group without inbound OAuth2/bearer-token authorization. A forged or arbitrary bearer token (e.g. Authorization: Bearer not-a-real-token) is enough to reach the SMF-callback handler -- the callback body is parsed and dispatched into NEF business logic instead of being rejected at the auth boundary. Same root cause as the other NEF SBI findings: the route group is mounted without any inbound auth middleware. NEF does not authenticate the producer NF identity before processing callback content; if an attacker can guess or obtain a valid NotifId, this missing auth boundary lets forged callbacks act on real subscription state. The route group is also reachable even when the runtime ServiceList does not declare it (it lists only nnef-pfdmanagement and nnef-oam). This vulnerability is fixed in 4.2.2. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's PCF POST /npcf-smpolicycontrol/v1/sm-policies handler (HandleCreateSmPolicyRequest) panics with a nil-pointer dereference when a downstream OpenAPI consumer call (UDR lookup) returns 404 Not Found and the consumer wrapper returns err != nil together with a nil response struct. The handler logs the OpenAPI error and continues executing instead of returning, then dereferences the nil response struct on a subsequent line and panics. Gin recovery converts the panic into HTTP 500, so a single attacker-shaped POST returns 500 instead of a clean 4xx whenever the downstream lookup fails. The PCF process keeps running. The trigger is a single POST containing input that causes the downstream UDR lookup to fail (e.g. an unknown DNN). In 4.2.1 this endpoint is also reachable WITHOUT an Authorization header because the PCF Npcf_SMPolicyControl route group is mounted without inbound auth middleware. This vulnerability is fixed in 4.2.2. |
| An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/actions_addupdatedelete.inc.php |
| An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/cron/class/cronjob.class.php, call_user_func_array() in function job type |
| OpenRapid RapidCMS v1.3.1 was discovered to contain an authentication bypass in the /template/default/menu.php component. This vulnerability is exploited via injecting a crafted SQL payload into the name cookie parameter. |
| Missing Authorization vulnerability in WebToffee Product Import Export for WooCommerce allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects Product Import Export for WooCommerce: from n/a through 2.5.6. |
| FacturaScripts is an open source accounting and invoicing software. Prior to v2026, an unauthenticated information disclosure vulnerability in the Installer controller allows any remote attacker to trigger phpinfo() on a fresh FacturaScripts deployment by requesting /?phpinfo=TRUE, exposing full PHP configuration, server environment variables (including any database credentials, API keys, or application secrets set as env vars), filesystem paths, and loaded extensions without being authenticated. This vulnerability is fixed in v2026. |
| FacturaScripts is an open source accounting and invoicing software. In 2025.92 and earlier, a stored Cross-Site Scripting (XSS) vulnerability exists in the product search modal of sales (Core/Lib/AjaxForms/SalesModalHTML.php) and purchases documents (Core/Lib/AjaxForms/PurchasesModalHTML.php). An authenticated user with access to the warehouse module can create a product with a malicious reference that executes arbitrary JavaScript in the browser of any other user who opens the product search modal inside an invoice, order, or delivery note. |
| OneUptime is an open-source monitoring and observability platform. Prior to 10.0.98, OneUptime uses the Node.js' vm module as an isolation primitive. This API was not designed for that and can be escaped via error objects and infinite recursion. This vulnerability is fixed in 10.0.98. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec()
CO-RE accessor strings are colon-separated indices that describe a path
from a root BTF type to a target field, e.g. "0:1:2" walks through
nested struct members. bpf_core_parse_spec() parses each component with
sscanf("%d"), so negative values like -1 are silently accepted. The
subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the
upper bound and always pass for negative values because C integer
promotion converts the __u16 btf_vlen result to int, making the
comparison (int)(-1) >= (int)(N) false for any positive N.
When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff,
producing an out-of-bounds read far past the members array. A crafted
BPF program with a negative CO-RE accessor on any struct that exists in
vmlinux BTF (e.g. task_struct) crashes the kernel deterministically
during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y
(default on major distributions). The bug is reachable with CAP_BPF:
BUG: unable to handle page fault for address: ffffed11818b6626
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full)
RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354)
RAX: 00000000ffffffff
Call Trace:
<TASK>
bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321)
bpf_core_apply (kernel/bpf/btf.c:9507)
check_core_relo (kernel/bpf/verifier.c:19475)
bpf_check (kernel/bpf/verifier.c:26031)
bpf_prog_load (kernel/bpf/syscall.c:3089)
__sys_bpf (kernel/bpf/syscall.c:6228)
</TASK>
CO-RE accessor indices are inherently non-negative (struct member index,
array element index, or enumerator index), so reject them immediately
after parsing. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potentially leftover ep1_in_urb at error path
The previous fix for handling the error from setup_card() missed that
an internal URB cdev->ep1_in_urb might have been already submitted
beforehand. In the normal case, this URB gets killed at the
disconnection, but in the error path, we didn't do it, hence there can
be a potential leak.
Fix it in the error path for setup_card(), too. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both
protocol and result, this is currently not treated as an error. In case
of ac->negotiating == true and ac->protocol > 0, this leads to setting
ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for
ac->protocol != protocol returns false, and init_protocol() is not
called. Subsequently, ac->ops->handle_reply() is called, which leads to
a null pointer dereference, because ac->ops is still NULL.
This patch changes the check for ac->protocol != protocol to
!ac->protocol, as this also includes the case when the protocol was set
to zero in the message. This causes the message to be treated as
containing a bad auth protocol. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - snapshot IV for async AEAD requests
AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during
request processing. For async requests, later socket activity can
update that shared state before the original request has fully
completed, which can lead to inconsistent IV handling.
Snapshot the IV into per-request storage when preparing the AEAD
request, so in-flight operations no longer depend on mutable socket
state. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex
vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the
vdev->cdx_irqs array based on its value, but provides no serialization
against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race
such that one observes config_msi as set while another clears it and
frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free
of the cdx_irqs array.
Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in
vfio_cdx_set_msi_trigger(), which is the single chokepoint through
which all updates to config_msi, cdx_irqs, and msi_count flow, covering
both the ioctl path and the close-device cleanup path. This keeps the
test of config_msi atomic with the subsequent enable, disable, or
trigger operations.
Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part
of this change: the optimization it provided is redundant with the
!config_msi early-return inside vfio_cdx_msi_disable(), and leaving the
test in place would be an unsynchronized read of state the new lock is
meant to protect. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix overlayfs mmap() and mprotect() access checks
The existing SELinux security model for overlayfs is to allow access if
the current task is able to access the top level file (the "user" file)
and the mounter's credentials are sufficient to access the lower
level file (the "backing" file). Unfortunately, the current code does
not properly enforce these access controls for both mmap() and mprotect()
operations on overlayfs filesystems.
This patch makes use of the newly created security_mmap_backing_file()
LSM hook to provide the missing backing file enforcement for mmap()
operations, and leverages the backing file API and new LSM blob to
provide the necessary information to properly enforce the mprotect()
access controls. |
