| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix soft lockup in status_resync
status_resync() will calculate 'curr_resync - recovery_active' to show
user a progress bar like following:
[============>........] resync = 61.4%
'curr_resync' and 'recovery_active' is updated in md_do_sync(), and
status_resync() can read them concurrently, hence it's possible that
'curr_resync - recovery_active' can overflow to a huge number. In this
case status_resync() will be stuck in the loop to print a large amount
of '=', which will end up soft lockup.
Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case,
this way resync in progress will be reported to user. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
[ 102.873958] Call Trace:
[ 102.873959] <TASK>
[ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.874375] process_one_work+0x21f/0x3f0
[ 102.874377] worker_thread+0x200/0x3e0
[ 102.874378] ? process_one_work+0x3f0/0x3f0
[ 102.874379] kthread+0xfd/0x130
[ 102.874380] ? kthread_complete_and_exit+0x20/0x20
[ 102.874381] ret_from_fork+0x22/0x30
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Don't tx before switchdev is fully configured
There is possibility that ice_eswitch_port_start_xmit might be
called while some resources are still not allocated which might
cause NULL pointer dereference. Fix this by checking if switchdev
configuration was finished. |
| In the Linux kernel, the following vulnerability has been resolved:
test_firmware: fix memory leak in test_firmware_init()
When misc_register() failed in test_firmware_init(), the memory pointed
by test_fw_config->name is not released. The memory leak information is
as follows:
unreferenced object 0xffff88810a34cb00 (size 32):
comm "insmod", pid 7952, jiffies 4294948236 (age 49.060s)
hex dump (first 32 bytes):
74 65 73 74 2d 66 69 72 6d 77 61 72 65 2e 62 69 test-firmware.bi
6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 n...............
backtrace:
[<ffffffff81b21fcb>] __kmalloc_node_track_caller+0x4b/0xc0
[<ffffffff81affb96>] kstrndup+0x46/0xc0
[<ffffffffa0403a49>] __test_firmware_config_init+0x29/0x380 [test_firmware]
[<ffffffffa040f068>] 0xffffffffa040f068
[<ffffffff81002c41>] do_one_initcall+0x141/0x780
[<ffffffff816a72c3>] do_init_module+0x1c3/0x630
[<ffffffff816adb9e>] load_module+0x623e/0x76a0
[<ffffffff816af471>] __do_sys_finit_module+0x181/0x240
[<ffffffff89978f99>] do_syscall_64+0x39/0xb0
[<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-shark: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the radio-shark2
driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 3271 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 3271 Comm: kworker/0:3 Not tainted 6.1.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 00 36 ea fb 48 8b 7c 24 18 e8 36 1c 02 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 b6 90 8a e8 9a 29 b8 03 <0f> 0b e9 58 f8 ff ff e8 d2 35 ea fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90003876dd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff8880750b0040 RSI: ffffffff816152b8 RDI: fffff5200070edac
RBP: ffff8880172d81e0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff8880285c5040 R14: 0000000000000002 R15: ffff888017158200
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe03235b90 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_bulk_msg+0x226/0x550 drivers/usb/core/message.c:387
shark_write_reg+0x1ff/0x2e0 drivers/media/radio/radio-shark2.c:88
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
these endpoints (and similarly for the radio-shark driver). |
| A potential security vulnerability has been identified in HP Sure Start’s protection of the Intel Flash Descriptor in certain HP PC products, which might allow security bypass, arbitrary code execution, loss of integrity or confidentiality, or denial of service. HP is releasing BIOS updates to mitigate the potential vulnerability. |
| A weakness has been identified in SourceCodester Hotel and Lodge Management System 1.0. The impacted element is an unknown function of the file /profile.php of the component Profile Page. Executing manipulation of the argument image can lead to unrestricted upload. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: fix memory leak of remain_skbs
hif_dev->remain_skb is allocated and used exclusively in
ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is
processed and subsequently freed (in error paths) only during the next
call of ath9k_hif_usb_rx_stream().
So, if the urbs are deallocated between those two calls due to the device
deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream()
is not called next time and the allocated remain_skb is leaked. Our local
Syzkaller instance was able to trigger that.
remain_skb makes sense when receiving two consecutive urbs which are
logically linked together, i.e. a specific data field from the first skb
indicates a cached skb to be allocated, memcpy'd with some data and
subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs
deallocation supposedly makes that link irrelevant so we need to free the
cached skb in those cases.
Fix the leak by introducing a function to explicitly free remain_skb (if
it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL
when it has not been allocated at all (hif_dev struct is kzalloced) or
when it has been processed in next call to ath9k_hif_usb_rx_stream().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix possible double unlock when moving a directory |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gvt: fix vgpu debugfs clean in remove
Check carefully on root debugfs available when destroying vgpu,
e.g in remove case drm minor's debugfs root might already be destroyed,
which led to kernel oops like below.
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14
BUG: kernel NULL pointer dereference, address: 0000000000000150
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6
Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022
RIP: 0010:__lock_acquire+0x5e2/0x1f90
Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0
RSP: 0018:ffff9f770274f948 EFLAGS: 00010046
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
lock_acquire+0xbf/0x2b0
? simple_recursive_removal+0xa5/0x2b0
? lock_release+0x13d/0x2d0
down_write+0x2a/0xd0
? simple_recursive_removal+0xa5/0x2b0
simple_recursive_removal+0xa5/0x2b0
? start_creating.part.0+0x110/0x110
? _raw_spin_unlock+0x29/0x40
debugfs_remove+0x40/0x60
intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt]
intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt]
intel_vgpu_release_dev+0xe/0x20 [kvmgt]
device_release+0x30/0x80
kobject_put+0x79/0x1b0
device_release_driver_internal+0x1b8/0x230
bus_remove_device+0xec/0x160
device_del+0x189/0x400
? up_write+0x9c/0x1b0
? mdev_device_remove_common+0x60/0x60 [mdev]
mdev_device_remove_common+0x22/0x60 [mdev]
mdev_device_remove_cb+0x17/0x20 [mdev]
device_for_each_child+0x56/0x80
mdev_unregister_parent+0x5a/0x81 [mdev]
intel_gvt_clean_device+0x2d/0xe0 [kvmgt]
intel_gvt_driver_remove+0x2e/0xb0 [i915]
i915_driver_remove+0xac/0x100 [i915]
i915_pci_remove+0x1a/0x30 [i915]
pci_device_remove+0x31/0xa0
device_release_driver_internal+0x1b8/0x230
unbind_store+0xd8/0x100
kernfs_fop_write_iter+0x156/0x210
vfs_write+0x236/0x4a0
ksys_write+0x61/0xd0
do_syscall_64+0x55/0x80
? find_held_lock+0x2b/0x80
? lock_release+0x13d/0x2d0
? up_read+0x17/0x20
? lock_is_held_type+0xe3/0x140
? asm_exc_page_fault+0x22/0x30
? lockdep_hardirqs_on+0x7d/0x100
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc9b2c9e0c4
Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4
RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001
RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30
R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00
</TASK>
Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential null-deref in dm_resume
[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null
[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: Use last transaction's pmd->root when commit failed
Recently we found a softlock up problem in dm thin pool btree lookup
code due to corrupted metadata:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 7 PID: 2669225 Comm: kworker/u16:3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: dm-thin do_worker [dm_thin_pool]
Call Trace:
<IRQ>
dump_stack+0x9c/0xd3
panic+0x35d/0x6b9
watchdog_timer_fn.cold+0x16/0x25
__run_hrtimer+0xa2/0x2d0
</IRQ>
RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio]
__bufio_new+0x11f/0x4f0 [dm_bufio]
new_read+0xa3/0x1e0 [dm_bufio]
dm_bm_read_lock+0x33/0xd0 [dm_persistent_data]
ro_step+0x63/0x100 [dm_persistent_data]
btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data]
dm_btree_lookup+0x16f/0x210 [dm_persistent_data]
dm_thin_find_block+0x12c/0x210 [dm_thin_pool]
__process_bio_read_only+0xc5/0x400 [dm_thin_pool]
process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool]
process_one_work+0x3c5/0x730
Following process may generate a broken btree mixed with fresh and
stale btree nodes, which could get dm thin trapped in an infinite loop
while looking up data block:
Transaction 1: pmd->root = A, A->B->C // One path in btree
pmd->root = X, X->Y->Z // Copy-up
Transaction 2: X,Z is updated on disk, Y write failed.
// Commit failed, dm thin becomes read-only.
process_bio_read_only
dm_thin_find_block
__find_block
dm_btree_lookup(pmd->root)
The pmd->root points to a broken btree, Y may contain stale node
pointing to any block, for example X, which gets dm thin trapped into
a dead loop while looking up Z.
Fix this by setting pmd->root in __open_metadata(), so that dm thin
will use the last transaction's pmd->root if commit failed.
Fetch a reproducer in [Link].
Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790 |
| Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, `Rack::Multipart::Parser` can accumulate unbounded data when a multipart part’s header block never terminates with the required blank line (`CRLFCRLF`). The parser keeps appending incoming bytes to memory without a size cap, allowing a remote attacker to exhaust memory and cause a denial of service (DoS). Attackers can send incomplete multipart headers to trigger high memory use, leading to process termination (OOM) or severe slowdown. The effect scales with request size limits and concurrency. All applications handling multipart uploads may be affected. Versions 2.2.19, 3.1.17, and 3.2.2 cap per-part header size (e.g., 64 KiB). As a workaround, restrict maximum request sizes at the proxy or web server layer (e.g., Nginx `client_max_body_size`). |
| In the Linux kernel, the following vulnerability has been resolved:
lib/fonts: fix undefined behavior in bit shift for get_default_font
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in lib/fonts/fonts.c:139:20
left shift of 1 by 31 places cannot be represented in type 'int'
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
get_default_font+0x1c7/0x1f0
fbcon_startup+0x347/0x3a0
do_take_over_console+0xce/0x270
do_fbcon_takeover+0xa1/0x170
do_fb_registered+0x2a8/0x340
fbcon_fb_registered+0x47/0xe0
register_framebuffer+0x294/0x4a0
__drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
bochs_pci_probe+0x6ca/0x772 [bochs]
local_pci_probe+0x4d/0xb0
pci_device_probe+0x119/0x320
really_probe+0x181/0x550
__driver_probe_device+0xc6/0x220
driver_probe_device+0x32/0x100
__driver_attach+0x195/0x200
bus_for_each_dev+0xbb/0x120
driver_attach+0x27/0x30
bus_add_driver+0x22e/0x2f0
driver_register+0xa9/0x190
__pci_register_driver+0x90/0xa0
bochs_pci_driver_init+0x52/0x1000 [bochs]
do_one_initcall+0x76/0x430
do_init_module+0x61/0x28a
load_module+0x1f82/0x2e50
__do_sys_finit_module+0xf8/0x190
__x64_sys_finit_module+0x23/0x30
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix a null-ptr-deref in tipc_topsrv_accept
syzbot found a crash in tipc_topsrv_accept:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Workqueue: tipc_rcv tipc_topsrv_accept
RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
Call Trace:
<TASK>
tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.
srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.
Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null. |
| File upload leading to remote code execution (RCE) in the “melis-cms-slider” module of Melis Technology's Melis Platform. This vulnerability allows an attacker to upload a malicious file via a POST request to '/melis/MelisCmsSlider/MelisCmsSliderDetails/saveDetailsForm' using the 'mcsdetail_img' parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Check instead of asserting on nested TSC scaling support
Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default. Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking
KVM's state_test selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
Call Trace:
<TASK>
enter_svm_guest_mode+0x114/0x560 [kvm_amd]
nested_svm_vmrun+0x260/0x330 [kvm_amd]
vmrun_interception+0x29/0x30 [kvm_amd]
svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
svm_handle_exit+0xe7/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x45ca1b
Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately. |
