| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pf1550: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not keep dest_dst if dev is going down
There is race between the netdev notifier ip_vs_dst_event()
and the code that caches dst with dev that is going down.
As the FIB can be notified for the closed device after our
handler finishes, it is possible valid route to be returned
and cached resuling in a leaked dev reference until the dest
is not removed.
To prevent new dest_dst to be attached to dest just after the
handler dropped the old one, add a netif_running() check
to make sure the notifier handler is not currently running
for device that is closing. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
[ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI
[ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
[ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary)
[ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022
[ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding]
[ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6
04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00
[ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206
[ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e
[ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8
[ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8
[ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119
[ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810
[ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000
[ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0
[ 214.310347] Call Trace:
[ 214.313070] <IRQ>
[ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding]
[ 214.320975] bond_handle_frame+0x166/0xb60 [bonding]
[ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding]
[ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710
[ 214.339199] ? __pfx_arp_process+0x10/0x10
[ 214.343775] ? sched_balance_find_src_group+0x98/0x630
[ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10
[ 214.356513] ? arp_rcv+0x307/0x690
[ 214.360311] ? __pfx_arp_rcv+0x10/0x10
[ 214.364499] ? __lock_acquire+0x58c/0xbd0
[ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0
[ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 214.380743] ? lock_acquire+0x10b/0x140
[ 214.385026] process_backlog+0x3f1/0x13a0
[ 214.389502] ? process_backlog+0x3aa/0x13a0
[ 214.394174] __napi_poll.constprop.0+0x9f/0x370
[ 214.399233] net_rx_action+0x8c1/0xe60
[ 214.403423] ? __pfx_net_rx_action+0x10/0x10
[ 214.408193] ? lock_acquire.part.0+0xbd/0x260
[ 214.413058] ? sched_clock_cpu+0x6c/0x540
[ 214.417540] ? mark_held_locks+0x40/0x70
[ 214.421920] handle_softirqs+0x1fd/0x860
[ 214.426302] ? __pfx_handle_softirqs+0x10/0x10
[ 214.431264] ? __neigh_event_send+0x2d6/0xf50
[ 214.436131] do_softirq+0xb1/0xf0
[ 214.439830] </IRQ>
The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where
rlb_arp_recv() can race with rlb_deinitialize() and dereference
a freed rx_hashtbl entry.
Fix this by setting recv_probe to NULL and then calling
synchronize_net() to wait for any concurrent RX processing to finish.
This ensures that no RX handler can access rx_hashtbl after it is freed
in bond_alb_deinitialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the total number of nodes
Currently, the nameserver doesn't limit the number of nodes it handles.
This can be an attack vector if a malicious client starts registering
random nodes, leading to memory exhaustion.
Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is
chosen based on the current platform requirements. If requirement changes
in the future, this limit can be increased. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.7 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user to access CI data from a different ref type than intended. |
| GitBucket 4.23.1 contains an unauthenticated remote code execution vulnerability that allows attackers to execute arbitrary commands by exploiting weak secret token generation and insecure file upload functionality. Attackers can brute-force the Blowfish encryption key, upload a malicious JAR plugin via the git-lfs endpoint, and execute system commands through an exposed exploit endpoint. |
| Home Assistant Community Store (HACS) prior to 1.10.0 contains a path traversal vulnerability that allows unauthenticated attackers to read sensitive files by traversing directories via the /hacsfiles/ endpoint. Attackers can retrieve the .storage/auth file containing user credentials and refresh tokens, then craft valid JWT tokens to gain administrative access to Home Assistant instances. |
| Nx Console is the user interface for Nx & Lerna. On 19 May 2026, a malicious version of Nx Console, 18.95.0, was published at 12:30 PM UTC and removed soon after at 12:48 PM UTC, leaving it available for ~18 minutes in Visual Studio Marketplace. For OpenVSX, the problem was detected later, and the compromised version was available from 12:33 UTC to 13:09 UTC (~36 minutes). Version 18.100.0 of Nx Console is not compromised and users may remediate by upgrading to that version. |
| Hedera Guardian through 3.5.1 contains an authentication bypass vulnerability in the GET /api/v1/demo/registered-users endpoint that allows unauthenticated attackers to retrieve sensitive user information. Attackers can access the endpoint without providing authentication credentials to obtain usernames, Hedera DIDs, parent registry DIDs, system roles, and policy role assignments for all registered users in the system. |
| CWE-312: Cleartext Storage of Sensitive Information vulnerability exists that could cause the disclosure of a sensitive information which could result in revealing protected source code and loss of confidentiality, When an authorized attacker accesses the source code for editing or compiling it. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix memory leaks in rxkad_verify_response()
Fix rxkad_verify_response() to free the ticket and the server key under all
circumstances by initialising the ticket pointer to NULL and then making
all paths through the function after the first allocation has been done go
through a single common epilogue that just releases everything - where all
the releases skip on a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix invalid deref of rawdata when export_binary is unset
If the export_binary parameter is disabled on runtime, profiles that
were loaded before that will still have their rawdata stored in
apparmorfs, with a symbolic link to the rawdata on the policy
directory. When one of those profiles are replaced, the rawdata is set
to NULL, but when trying to resolve the symbolic links to rawdata for
that profile, it will try to dereference profile->rawdata->name when
profile->rawdata is now NULL causing an oops. Fix it by checking if
rawdata is set.
[ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088
[ 168.657420] #PF: supervisor read access in kernel mode
[ 168.660619] #PF: error_code(0x0000) - not-present page
[ 168.663613] PGD 0 P4D 0
[ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI
[ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary)
[ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330
[ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8
[ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282
[ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158
[ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80
[ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000
[ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80
[ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0
[ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000
[ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0
[ 168.701696] Call Trace:
[ 168.702325] <TASK>
[ 168.702995] rawdata_get_link_data+0x1c/0x30
[ 168.704145] vfs_readlink+0xd4/0x160
[ 168.705152] do_readlinkat+0x114/0x180
[ 168.706214] __x64_sys_readlink+0x1e/0x30
[ 168.708653] x64_sys_call+0x1d77/0x26b0
[ 168.709525] do_syscall_64+0x81/0x500
[ 168.710348] ? do_statx+0x72/0xb0
[ 168.711109] ? putname+0x3e/0x80
[ 168.711845] ? __x64_sys_statx+0xb7/0x100
[ 168.712711] ? x64_sys_call+0x10fc/0x26b0
[ 168.713577] ? do_syscall_64+0xbf/0x500
[ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0
[ 168.715404] ? irqentry_exit+0xb2/0x740
[ 168.716359] ? exc_page_fault+0x90/0x1b0
[ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in __unix_needs_revalidation
When receiving file descriptors via SCM_RIGHTS, both the socket pointer
and the socket's sk pointer can be NULL during socket setup or teardown,
causing NULL pointer dereferences in __unix_needs_revalidation().
This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new
__unix_needs_revalidation() function was added without proper NULL checks.
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0x0000000000000018
RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0)
Call Trace:
apparmor_file_receive+0x42/0x80
security_file_receive+0x2e/0x50
receive_fd+0x1d/0xf0
scm_detach_fds+0xad/0x1c0
The function dereferences sock->sk->sk_family without checking if either
sock or sock->sk is NULL first.
Add NULL checks for both sock and sock->sk before accessing sk_family. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, a crafted UUID such as $(id>/tmp/rce) in the config causes root RCE when pamusb-conf --reset-pads is run. A USB device with a crafted filesystem UUID (some controllers allow this) can inject the payload at --add-device time. Also, userName from the XML config is passed to os.system() in pamusb-agent, which invokes a shell. This vulnerability is fixed in 0.8.7. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, pamusb-pinentry reads the PINENTRY_FALLBACK_APP environment variable and executes it directly without any validation. Any process that can set environment variables before pamusb-pinentry is invoked can point PINENTRY_FALLBACK_APP at an arbitrary binary or script and have it executed with the privileges of the pam_usb tool chain. This vulnerability is fixed in 0.8.7. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, src/device.c passed the return values of udisks_drive_get_serial(), udisks_drive_get_vendor(), and udisks_drive_get_model() directly to strcmp() without NULL checks. The GIO/UDisks API documentation states these accessors can return NULL for devices that do not expose the corresponding field. Passing NULL to strcmp() is undefined behaviour (typically a SIGSEGV). This vulnerability is fixed in 0.8.7. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, symlink attacks on pad directory and pad files enable authentication bypass and root file corruption. This vulnerability is fixed in 0.8.7. |
| In OpenStack Swift before 2.36.2 and 2.37.2, s3api middleware enters an infinite loop when processing a truncated aws-chunked PUT request body. The StreamingInput class repeatedly appends an empty buffer and re-reads, causing the proxy-server worker handling the request to become permanently unresponsive with increasing CPU and memory consumption. An authenticated attacker can systematically exhaust all proxy-server workers, resulting in denial of service. The defect was introduced in Swift 2.36.0. |
| A misconfigured Content Security Policy (CSP) in HCL BigFix Remote Control Server WebUI (versions 10.1.0.0442 and earlier) fails to define directives without fallbacks, allowing attackers to bypass intended security restrictions and load unauthorized resources. |
