| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in MikroTik RouterOS v.7.14.2 and SwOS v.2.18 exposes the WebFig management interface over cleartext HTTP by default, allowing an on-path attacker to execute injected JavaScript in the administrator’s browser and intercept credentials. |
| get-jwks contains fetch utils for JWKS keys. In versions prior to 11.0.2, a vulnerability in get-jwks can lead to cache poisoning in the JWKS key-fetching mechanism. When the iss (issuer) claim is validated only after keys are retrieved from the cache, it is possible for cached keys from an unexpected issuer to be reused, resulting in a bypass of issuer validation. This design flaw enables a potential attack where a malicious actor crafts a pair of JWTs, the first one ensuring that a chosen public key is fetched and stored in the shared JWKS cache, and the second one leveraging that cached key to pass signature validation for a targeted iss value. The vulnerability will work only if the iss validation is done after the use of get-jwks for keys retrieval. This issue has been patched in version 11.0.2. |
| During a short time frame while the device is booting an unauthenticated remote attacker can send traffic to unauthorized networks due to the switch operating in an undefined state until a CPU-induced reset allows proper configuration. |
| Certain build processes for libuv and Node.js for 32-bit systems, such as for the nodejs binary package through nodejs_20.19.0+dfsg-2_i386.deb for Debian GNU/Linux, have an inconsistent off_t size (e.g., building on i386 Debian always uses _FILE_OFFSET_BITS=64 for the libuv dynamic library, but uses the _FILE_OFFSET_BITS global system default of 32 for nodejs), leading to out-of-bounds access. NOTE: this is not a problem in the Node.js software itself. In particular, the Node.js website's download page does not offer prebuilt Node.js for Linux on i386. |
| Improper buffer restrictions for some Intel(R) Xeon(R) Processor firmware with SGX enabled may allow a privileged user to potentially enable escalation of privilege via local access. |
| A firmware bug which may lead to misinterpretation of data in the AMC2-4WCF and AMC2-2WCF allowing an adversary to grant access to the last authorized user. |
| Improper buffer restrictions in PlatformPfrDxe driver in UEFI firmware for some Intel(R) Server D50FCP Family products may allow a privileged user to enable escalation of privilege via local access. |
| A security issue exists due to the web-based debugger agent enabled on Rockwell Automation ControlLogix® Ethernet Modules. If a specific IP address is used to connect to the WDB agent, it can allow remote attackers to perform memory dumps, modify memory, and control execution flow. |
| A vulnerability was found in WAVLINK QUANTUM D2G, QUANTUM D3G, WL-WN530G3A, WL-WN530HG3, WL-WN532A3 and WL-WN576K1 up to V1410_240222 and classified as critical. Affected by this issue is the function sys_login of the file /cgi-bin/login.cgi of the component HTTP POST Request Handler. The manipulation of the argument login_page leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| A vulnerability has been found in Nintendo Animal Crossing, Doubutsu no Mori+ and Doubutsu no Mori e+ 1.00/1.01 on GameCube and classified as critical. Affected by this vulnerability is an unknown functionality of the component Letter Trigram Handler. The manipulation leads to memory corruption. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. |
| A security vulnerability has been detected in jarun nnn up to 5.1. The impacted element is the function show_content_in_floating_window/run_cmd_as_plugin of the file nnn/src/nnn.c. The manipulation leads to double free. An attack has to be approached locally. The identifier of the patch is 2f07ccdf21e705377862e5f9dfa31e1694979ac7. It is suggested to install a patch to address this issue. |
| MDaemon Mail Server 23.5.2 validates SPF, DKIM, and DMARC using the email enclosed in angle brackets (<>) in the From: header of SMTP DATA. An attacker can craft a From: header with multiple invisible Unicode thin spaces to display a spoofed sender while passing validation, allowing email spoofing even when anti-spoofing protections are in place. NOTE: this is disputed by the Supplier because UI spoofing occurs in a client, not in a server such as MDaemon's product or any other server implementation. Also, if a client without its own spoofing protection must be used, the Header Screening feature in MDaemon's product can be employed to mitigate the client-side vulnerability. |
| The Versa Director software exposes a number of services by default and allow attackers an easy foothold due to default credentials and multiple accounts (most with sudo access) that utilize the same default credentials. By default, Versa director exposes ssh and postgres to the internet, alongside a host of other services.
Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers.
Workarounds or Mitigation:
Versa recommends the following security controls:
1) Change default passwords to complex passwords
2) Passwords must be complex with at least 8 characters that comprise of upper case, and lower case alphabets, as well as at at least one digit, and one special character
3) Passwords must be changed at least every 90 days
4) Password change history is checked to ensure that the at least the last 5 passwords must be used when changing password.
5) Review and audit logs for all authentication attempts to check for unauthorized/suspicious login attempts and enforce remediation steps. |
| An issue in htop-dev htop v.2.20 allows a local attacker to cause an out-of-bounds access in the Header_populateFromSettings function. |
| Insecure default configurations in HI-SCAN 6040i Hitrax HX-03-19-I allow authenticated attackers with low-level privileges to escalate to root-level privileges. |
| The redirect_to method in Rails allows provided values to contain characters which are not legal in an HTTP header value. This results in the potential for downstream services which enforce RFC compliance on HTTP response headers to remove the assigned Location header. |
| Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in Payara Platform Payara Server (Grizzly, REST Management Interface modules), Payara Platform Payara Micro (Grizzly modules) allows Manipulating State, Identity Spoofing.This issue affects Payara Server: from 4.1.151 through 4.1.2.191.51, from 5.20.0 through 5.70.0, from 5.2020.2 through 5.2022.5, from 6.2022.1 through 6.2024.12, from 6.0.0 through 6.21.0; Payara Micro: from 4.1.152 through 4.1.2.191.51, from 5.20.0 through 5.70.0, from 5.2020.2 through 5.2022.5, from 6.2022.1 through 6.2024.12, from 6.0.0 through 6.21.0. |
| A vulnerability has been identified in IEC 1Ph 7.4kW Child socket (8EM1310-2EH04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Child socket/ shutter (8EM1310-2EN04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m (8EM1310-2EJ04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m incl. SIM (8EM1310-2EJ04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket (8EM1310-2EH04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket incl. SIM (8EM1310-2EH04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter (8EM1310-2EN04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter SIM (8EM1310-2EN04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Child cable 7m (8EM1310-3EJ04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket (8EM1310-3EH04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket/ shutter (8EM1310-3EN04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m (8EM1310-3EJ04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m incl. SIM (8EM1310-3EJ04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket (8EM1310-3EH04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket incl. SIM (8EM1310-3EH04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter (8EM1310-3EN04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter SIM (8EM1310-3EN04-3GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child socket (8EM1310-3FH04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket (8EM1310-3FH04-3GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket incl. SI (8EM1310-3FH04-3GA2) (All versions < V2.135), UL Commercial Cellular 48A NTEP (8EM1310-5HF14-1GA2) (All versions < V2.135), UL Commercial Child 40A w/ 15118 HW (8EM1310-4CF14-0GA0) (All versions < V2.135), UL Commercial Child 48A BA Compliant (8EM1315-5CG14-0GA0) (All versions < V2.135), UL Commercial Child 48A w/ 15118 HW (8EM1310-5CF14-0GA0) (All versions < V2.135), UL Commercial Parent 40A with Simcard (8EM1310-4CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A (USPS) (8EM1317-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A BA Compliant (8EM1315-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A with Simcard BA (8EM1310-5CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1310-5CG14-1GA1) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1314-5CG14-2FA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1315-5HG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A,15118 25ft Sim (8EM1310-5CG14-1GA2) (All versions < V2.135), VersiCharge Blue™ 80A AC Cellular (8EM1315-7BG16-1FH2) (All versions < V2.135). Affected devices contain Modbus service enabled by default. This could allow an attacker connected to the same network to remotely control the EV charger. |
| Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings.
This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; μR10000 / μR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions. |
