| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: softing: fw_parse(): validate firmware record spans
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix foe_check_time allocation size
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject compressed segment that overflows the compressed input
lzo_decompress_bio() validates each on-disk segment length seg_len only
against the workspace cbuf size, not against the compressed input size
(compressed_len, the total folio bytes of the bio). A crafted extent can
carry a segment whose seg_len passes the cbuf check but runs past the end
of the bio, so copy_compressed_segment() walks off the last folio:
get_current_folio() then returns the NULL folio from bio_next_folio(), and
with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults.
BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383)
Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29
Workqueue: btrfs-endio simple_end_io_work
kasan_report (mm/kasan/report.c:590)
lzo_decompress_bio (fs/btrfs/lzo.c:383)
end_bbio_compressed_read (fs/btrfs/compression.c:1065)
btrfs_bio_end_io (fs/btrfs/bio.c:135)
btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285)
simple_end_io_work
process_one_work
worker_thread
Reject any segment whose payload would extend beyond compressed_len before
copying it, treating it as corruption like the other on-disk validation
failures in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone
kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the
structure to the options_len, which is then initialized to zero.
Later, we're initializing the structure by copying the tunnel info
together with the options, and this triggers a warning for a potential
memcpy overflow, since the compiler estimates that the options can't
fit into the structure, even though the memory for them is actually
allocated.
memcpy: detected buffer overflow: 104 byte write of buffer size 96
WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report
skb_tunnel_info_unclone+0x179/0x190
geneve_xmit+0x7fe/0xe00
The issue is triggered when built with clang and source fortification.
Fix that by doing the copy in two stages: first - the main data with
the options_len, then the options. This way the correct length should
be known at the time of the copy.
It would be better if the options_len never changed after allocation,
but the allocation code is a little separate from the initialization
and it would be awkward and potentially dangerous to return a struct
with options_len set to a non-zero value from the metadata_dst_alloc().
Another option would be to use ip_tunnel_info_opts_set(), but it is
doing too many unnecessary operations for the use case here. |
| A buffer overflow vulnerability in the WatchGuard Fireware OS Management Web UI allows an authenticated administrator with network access to cause a denial of service (DoS) condition or potentially execute arbitrary code by sending specially crafted network traffic. |
| A vulnerability has been found in SourceCodester Simple Online Food Ordering System 1.0. This affects an unknown function of the file /admin/ajax.php?action=login2. The manipulation of the argument email leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| amqp091-go is a Go AMQP 0.9.1 client. Before version 1.13.0, a compromised or malicious AMQP broker can force the client to allocate resources for and process content body frames that exceed the negotiated frame_max limit. This can lead to unexpected memory consumption or application-layer denial of service (DoS), bypassing the protocol's built-in framing constraints. Version 1.13.0 contains a fix. No known workarounds are available. |
| The LiteSpeed Cache plugin for WordPress is vulnerable to Stored Cross-Site Scripting via crafted `<img>` tag attributes in all versions up to, and including, 7.7. This is due to a flawed regular expression that is used to strip `width` and `height` attributes from images when the "Lazy Load Images" and "Add Missing Sizes" features are enabled. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that execute whenever a user accesses an injected page. |
| A vulnerability was found in SililaWijesinghe Food Ordering System up to ba314e897e3365600461e5ea59432e39ceaa0fa5. Affected by this issue is some unknown functionality of the file /search.php. Performing a manipulation of the argument search_box results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way. |
| RustDesk versions before 1.4.7 contain an uncontrolled speculative memory allocation vulnerability in BytesCodec. Before authentication, the decoder trusts the payload length encoded in a four-byte frame header and reserves that amount before receiving the payload. A crafted header can request up to 1,073,741,823 bytes of capacity, allowing unauthenticated attackers to use concurrent TCP connections to cause memory exhaustion and denial of service. The fix caps header-triggered speculative preallocation at 256 KiB. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13 contain a heap buffer overflow in PyOpenEXR triggered by a channel-name key collision between literal and prefixed RGB channels. When separate_channels=false, PyOpenEXR maps each physical channel name through channelNameToRGBA() and coalesces the results into a shared RGB array. A crafted flat scanline EXR that contains both a literal channel such as left and prefixed channels such as left.R, left.G, and left.B causes these names to collide, so the wrapper reuses an undersized two-dimensional NumPy array for the coalesced RGB slices and writes out of bounds when OpenEXR.File(path) decodes the pixels. This issue is fixed in versions 3.3.13 and 3.4.14. |
| mcp-shell is an MCP server for running shell commands securely, auditably, and on demand. Prior to 0.6.0, the default security.yaml allows /usr/bin/git, while security.go omits ! from containsShellMetacharacters and containsDangerousShellConstructs and applies no per-executable argument policy. A caller of the shell_exec MCP tool can provide the command argument /usr/bin/git -c alias.pwn=!<arbitrary-command>, causing Git to create a shell alias and execute arbitrary OS commands as the mcp-shell process user. The default Docker image runs as mcpuser with Git installed and secure mode enabled, so the bypass is exploitable in the default deployment without additional authentication beyond MCP connectivity. This issue is fixed in version 0.6.0. |
| D-Link DI-7001 MINI_5G 19.10.31A1 contains a code execution vulnerability in the flag parameter of msp_info, which can be exploited to run arbitrary commands. |
| Cross Site Scripting vulnerability in Omeka S v.4.2.0 allows a remote attacker to execute arbitrary code via the site navigation custom URL function |
| An issue in the JsonSanitizer.sanitize() component of OWASP json-sanitizer v1.2.3 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| The PPWP – Password Protect Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `ppwp` shortcode attributes in all versions up to, and including, 1.9.21 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs processes attacker-controlled data from the /ext URL route in yamcs-web/src/main/webapp/projects/webapp/src/app/core/routes/extension.matcher.ts, extension.component.ts, and app.component.ts without checking registered plugin IDs before DOM rendering through innerHTML. A crafted URL can execute JavaScript when opened by a user. The script can read data available to the Yamcs web application and perform actions in the user context. This issue is fixed in versions 5.12.8 and 5.13.2. |
| Stomper 5e2741e is vulnerable to Denial of Service. When a broker sends data to a client whose TCP connection was already closed by the peer, the server process receives SIGPIPE and immediately terminates, resulting in a denial of service. Any unauthenticated client can trigger the crash by closing the socket at specific points. |
| Print Assumptions does not report that a definition was produced while universe checking was disabled when that definition reaches the caller through Parameter Inline in a module type. Applying a functor inlines the body of the parameter, and the inlining drops the record that the term was built under Unset Universe Checking, so the resulting constant carries no trace of the unsafe operation. A module implementation can therefore prove False using a universe inconsistency, expose it through an inlined parameter, and have Print Assumptions report the dependent proof as closed under the global context. Because Print Assumptions is the in-process audit used to confirm that a development rests on no unexpected assumptions, a dependency built this way passes that audit while proving arbitrary propositions. The standalone checker coqchk does reject the resulting compiled file. The project records this in dev/doc/critical-bugs.md under non-fixed bugs and rates the risk as moderate when coqchk is not used. |
| Unauthenticated Cross Site Scripting (XSS) in Boost <= 2.0.4 versions. |
