| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore
esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the
top of the function and returns -EINVAL if either is not defined. This
prevents the default case from ever being reached, which means devices
with a sleep pinctrl state but without high-speed pin states (100mhz/
200mhz) can never restore their default pin configuration.
Move the IS_ERR checks for pins_100mhz and pins_200mhz into their
respective switch cases. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete
When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed
the per-SC metadata_dst with metadata_dst_free(), which kfree()s the
object unconditionally and ignores the dst reference count. The RX
datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under
rcu_read_lock() via xa_load(), takes a reference with dst_hold() and
attaches the dst to the skb with skb_dst_set(). A reader that already
obtained the rx_sc pointer can race with the delete path and operate on
freed memory.
Fix the owner side by dropping the reference with dst_release() instead
of freeing unconditionally, and convert the RX datapath to
dst_hold_safe() so a reader racing the SC delete cannot attach a dst
whose last reference was just dropped; only attach it when a reference
was actually taken.
mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc()
before rx_sc->md_dst was allocated and initialised, so a datapath reader
that looked the SC up by fs_id could observe rx_sc with md_dst still
NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer
whose contents were not yet visible. NULL-check the xa_load() result and
md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish
happens only after md_dst is fully initialised; the xarray RCU publish
then pairs with the rcu_read_lock()/xa_load() in the datapath.
Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element
without an RCU grace period while the same datapath reads it under
rcu_read_lock(); that is a separate pre-existing issue left to a
follow-up patch.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Sync page pool RX frags for CPU
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on probe failure
The vub300 driver lifetime-manages its controller state using
vub300->kref, with vub300_delete() freeing the mmc host when the last
reference is dropped. The probe error path after the inactivity timer has
been armed still bypasses that lifetime rule, however, and falls through
to mmc_free_host() directly if mmc_add_host() fails.
The race window is between arming the inactivity timer and reaching the
probe error unwind after mmc_add_host() fails:
probe thread timer/workqueue
------------ ---------------
kref_init(&vub300->kref) ref = 1
kref_get(&vub300->kref) ref = 2, timer ref
add_timer(inactivity_timer) fires after one second
|
| race window
|<---------------------------------------------------->
|
mmc_add_host(mmc)
inactivity timer fires
vub300_queue_dead_work()
kref_get() ref = 3
queue_work(deadwork)
mmc_add_host() fails
timer_delete_sync()
mmc_free_host(mmc)
frees vub300
deadwork runs
use-after-free
The inactivity timeout is one second, so this would require
mmc_add_host() to both fail and take more than one second to do so. This
is unlikely to happen in practice, but the error path is still wrong.
timer_delete_sync() only waits for the timer callback itself. It does
not flush deadwork that the callback may already have queued. As a
result, queued deadwork can still hold a kref while the probe error path
directly frees the backing mmc host, including the vub300 storage.
Fix this by using the same lifetime mechanism as disconnect. Clear
vub300->interface so that the timer callback and any queued deadwork
return early and drop their references, then drop the initial probe
reference and return without falling through to err_free_host. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix use-after-free during unmount
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work
Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports
and closes the CPU port conduits:
dsa_switch_for_each_cpu_port(dp, priv->ds)
dev_close(dp->conduit);
mxl862xx_remove() unregisters the switch before cancelling this work:
set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);
cancel_delayed_work_sync(&priv->stats_work);
dsa_unregister_switch(ds);
mxl862xx_host_shutdown(priv);
dsa_unregister_switch() frees the dsa_port objects. If a CRC error
schedules the work during teardown it can run after the ports have been
freed and dereference freed memory.
Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set
before dsa_unregister_switch(). DSA tears the ports down under
rtnl_lock(), so checking the flag under rtnl_lock() means the work either
runs before teardown and sees valid ports, or runs afterwards, observes
the flag and skips the walk. This mirrors the host_flood_work handler,
which skips torn-down ports under rtnl_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-adsp: fix UAF during device teardown
When the SOF audio driver fails to initialize (e.g. firmware boot
timeout), its devres unwind frees the snd_sof_dev object that the
mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback.
The mtk-adsp-mailbox shutdown clears the mailbox command registers
but leaves the IRQ line unmasked, so a late interrupt can still
queue a threaded handler after mbox_free_channel() had cleared
chan->cl, and mbox_chan_received_data() would then trigger UAF:
BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version
sof_ipc3_validate_fw_version
sof_ipc3_do_rx_work
sof_ipc3_rx_msg
mt8196_dsp_handle_request
mtk_adsp_ipc_recv
mbox_chan_received_data
mtk_adsp_mbox_isr
irq_thread_fn
Freed by task ...:
kfree
devres_release_all
really_probe
... (sof-audio-of-mt8196 probe failure)
The crash was observed roughly three seconds after the failed probe.
disable_irq() in shutdown and enable_irq() in startup. disable_irq()
also waits for any in-flight interrupts, so by the time
mbox_free_channel() proceeds to clear chan->cl no rx_callback can run.
In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked
between probe and the first client bind — otherwise an early interrupt
can crash on chan->cl == NULL in mbox_chan_received_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_past_sync() callback
Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have
reused.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush
nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop
replace without holding nh->lock, racing the unlocked IPv6 route
add/delete that mutate the list under nh->lock and free fib6_info
entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()):
BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
Read of size 8 at addr ffff888012953e18 by task exploit/146
nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
replace_nexthop (net/ipv4/nexthop.c:2610)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Unlike the other f6i_list walks, this one bumps each route's sernum via
fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock
around it would invert the established tb6_lock -> nh->lock order and
deadlock. As the only purpose is to invalidate cached dsts, bump the
IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead,
mirroring the rt_cache_flush() already done for IPv4 just above. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fail attrlist updates when the superblock is inactive
generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes.
If eviction selects the fake inode for a base inode's unnamed
$ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's
reference on the base inode while the fake inode is still hashed and marked
I_FREEING.
That iput can synchronously write back the base inode. The writeback path
may update mapping pairs and call ntfs_attrlist_update(), which
unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake
inode. VFS then finds the I_FREEING inode and waits for eviction to finish,
but the current task is still inside that eviction path, causing a
self-deadlock in find_inode().
Fix this by mirroring the teardown guard used by __ntfs_write_inode():
once SB_ACTIVE has been cleared, do not try to iget the attribute-list
fake inode. Return -EIO so teardown aborts the update instead of waiting on
the inode it is evicting. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: support IPIP tunnel with direct xmit
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: use nfsi->rwsem to protect traversal of the file lock list
Lingfeng identified a bug and suggested two solutions, but both appear
to have issues.
Generally, we cannot release flc_lock while iterating over the file lock
list to avoid use-after-free (UAF) problems with file locks. However,
functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot
adhere to this rule because recover_lock or nfs4_lock_delegation_recall
may take a long time. To resolve this, NFS switches to using nfsi->rwsem
for the same protection, and nfs_reclaim_locks follows this approach.
Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead,
this is inadequate since a single inode can have multiple nfs4_state
instances. Therefore, the fix is to also use nfsi->rwsem in this case.
Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), the functions
nfs4_locku_done and nfs4_lock_done also break this rule because they
call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding
this protection could cause many deadlocks, so instead, the call to
locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug
fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), it has been resolved
after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering
state recovery") because all slots are drained before calling
nfs4_do_reclaim, which prevents concurrent stateid changes along this path.
Also, nfs_delegation_claim_locks does not cause this concurrency either
since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is
sent, so nfs4_lock_done is not called. Therefore,
nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first
time the stateid is set. |
| SiYuan versions before v3.7.4 contain a publish-boundary bypass vulnerability in WebSocket broadcast sessions that allows anonymous readers to receive unfiltered edits. Attackers can establish a WebSocket connection to the publish surface and passively receive real-time content events including password-protected and forbidden documents without authentication. |
| A vulnerability has been found in Evergreen up to 3.14.11/3.15.11/3.16.5/3.17-beta1. The affected element is an unknown function of the file /osrf-gateway-v1 of the component open-ils.fielder OpenSRF Service. Such manipulation leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.14.12, 3.15.12, 3.16.6 and 3.17-beta2 is sufficient to fix this issue. The affected component should be upgraded. |
