| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks
_bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for
full sockets, so these helpers expect the socket lock to be held.
BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF
programs without acquiring the socket lock. A program attached to
either hook can therefore trigger the sock_owned_by_me() warning by
calling bpf_setsockopt() or bpf_getsockopt().
Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME
and CGROUP_UNIX_GETSOCKNAME. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: nfcon: Do not call console_is_registered() in nfcon_device()
Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list
synchronization") show_cons_active() calls the .device() method under
the console_list_lock, but console_is_registered() tries to acquire
console_list_lock as well, causing a deadlock. It should not be
necessary to check console_is_registered() here since the function
should not be called in the fist place when the console is not
registered. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative optlen in cgroup getsockopt hook
A cgroup getsockopt BPF program can shrink ctx->optlen after the
kernel getsockopt handler has run. The kernel-buffer variant, used by
TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original
length.
If BPF writes a negative optlen, that value is accepted and propagated
back to the TCP getsockopt code. It can then be passed to
copy_to_sockptr() as a size_t and trigger the hardened usercopy
bytes > INT_MAX warning.
Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(),
matching the lower-bound validation already present in the sockptr-based
getsockopt hook. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely discard unregistered deferred locks
When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on
rollback_list before allocating and registering the asynchronous work.
If either operation fails, rollback assumes that smb_lock->conn is
initialized and dereferences NULL. The deferred file_lock also remains
linked into the VFS blocked-lock state while it is freed.
Keep the lock off rollback_list until async setup succeeds. On setup
failures, explicitly unblock and wake the deferred lock before freeing it
and its ksmbd wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: detach blocked lock requests before freeing
A file_lock retained by ksmbd for byte-range lock bookkeeping can still
be part of the VFS blocked-request graph. In particular, the VFS can
chain a new waiter below an already blocked request through
flc_blocked_requests. The ksmbd_file reference count does not cover that
graph.
Both __ksmbd_close_fd() and the cross-request unlock path free these
retained file_lock objects directly. If a dependent waiter is still
attached, locks_release_private() hits
BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime
mismatch can leave a freed ksmbd_lock reachable through its request-local
llist.
Detach the file_lock from the blocked-request graph before freeing it in
the close, cross-request unlock, and rollback paths. locks_delete_block()
also wakes requests chained below the object. Remove llist when a
completed lock is published so a globally visible ksmbd_lock no longer
points into the submitting worker's stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope session state changes to bound connections
ksmbd_all_conn_set_status() treats every connection whose transient
binding flag is set as belonging to the target SessionId. A logoff or
session replacement can consequently move an unrelated connection to
NEED_RECONNECT or NEED_SETUP.
Pass the target session itself and select connections using either the
connection-local session xarray or the session's permanent channel list.
Use the same association test while waiting for requests to drain.
Serialize session-wide status changes under request_lock and do not
overwrite EXITING or RELEASING. Protect the shutdown transition with the
same lock so a concurrent session update cannot revive a closing
connection. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix session leak in ksmbd_session_register()
See the procedure below:
smb2_sess_setup
ksmbd_smb2_session_create
__session_create
atomic_set(&sess->refcnt, 2)
hash_add(sessions_table, &sess->hlist, sess->id)
ksmbd_session_register
xa_store(&conn->sessions, sess->id, sess) // fail
ksmbd_user_session_put
atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed
Remove the session from sessions_table and drop its table reference if
xa_store() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/blocklayout: Fix device leaks on parse failure
bl_parse_concat() and bl_parse_stripe() allocate a child device array and
then parse each child in turn. If parsing a child fails, the failed child is
not counted in nr_children and the parent may be left with a children array
that bl_free_device() will not release when nr_children is zero.
Release the failed child and the already parsed children before returning the
error. Also make bl_free_device() release the child array whenever the
children pointer is set, so that partially initialised concat or stripe
devices are cleaned up correctly.
bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the
file reference. Clear the pointer after fput() so that an outer cleanup path
does not put it again. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()
When nfs4_add_lease() races with a delegation return, it calls
nfs4_delete_lease() to clean up. Previously, it passed priv,
which can legitimately be NULL. Passing a NULL priv eventually
leads to a NULL pointer dereference in generic_setlease(). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
devm_clk_get_optional_enabled_with_rate() registers its cleanup action
before setting the clock rate. If setting the rate fails, it attempts to
disable and unprepare a clock that was never enabled. This issue was
spotted while reviewing "rust: clk: add devres-managed clks" [1].
Register the cleanup action only after successfully preparing and enabling
the clock.
[1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix NULL deref in dpll_device_ops() during teardown race
When the last owner of a dpll device unregisters while a foreign driver
still holds a pin on it via dpll_pin_on_pin_register(), the dpll object
stays alive with an empty registration list. A pin notification queued
before the unregister (e.g. ice reacting to zl3073x_i2c removal) then
walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and
dereferences the missing registration. dpll_lock cannot help because the
notification work was queued before the unregistering driver took the
lock.
Treat the empty registration list as a legitimate transient state. Make
dpll_priv() and dpll_device_ops() return NULL in that case and make
every pin netlink path that resolves a device from a pin skip such
dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and
returns -ENODEV when there is none, the pin dumpit skips such a pin
instead of aborting the dump, dpll_msg_add_pin_dplls() and the
frequency, esync, reference sync and phase adjust set paths skip dead
refs, and dpll_pin_parent_device_set() validates the parent with
dpll_device_get_by_id(). dpll_pin_register() is the last caller that
dereferenced the device ops without a check, so move its frequency
monitor validation under dpll_lock and tolerate a missing registration
there as well.
The empty registration list is equivalent to a cleared DPLL_REGISTERED
mark, both transitions happen under dpll_lock in dpll_device_register()
and dpll_device_unregister(). A pin notification for a pin whose dplls
are all gone is now dropped with -ENODEV instead of crashing, all
callers in the core ignore that return value.
WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40,
CPU#83: kworker/u576:3/23471
Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ...
Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice]
RIP: 0010:dpll_device_ops+0x24/0x40
Call Trace:
<TASK>
dpll_cmd_pin_get_one+0x336/0x520
dpll_pin_event_send+0x82/0x140
dpll_pin_on_pin_unregister+0xbb/0x160
ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice]
process_one_work+0x19e/0x370
worker_thread+0x1a6/0x310
kthread+0xe4/0x120
ret_from_fork+0x1a1/0x270
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page |
| In the Linux kernel, the following vulnerability has been resolved:
cuse: wait for pending RCU callbacks on module exit
Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"),
fuse_conn_put() frees the fuse_conn through call_rcu() rather than
synchronously. For cuse, fc->release is cuse_fc_release(), which
lives in the cuse module. If the module is removed before the RCU
grace period ends, the callback jumps into freed module memory:
userspace / module unload | RCU softirq
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
close(/dev/cuse) |
cuse_channel_release() |
fuse_dev_release() |
fuse_conn_put(fch->conn) |
call_rcu(delayed_release) ------+---> callback queued
|
rmmod cuse |
cuse_exit() |
cuse_channel_destroy() |
... |
return |
|
<module text freed> |
| rcu_do_batch()
| delayed_release()
| fc->release()
| -> cuse_fc_release()
| ^^^ freed text!
The freed module text is unmapped by vfree(), so the jump into the
stale callback triggers a page-fault Oops. If the virtual address
is subsequently reused, the callback could execute unrelated code
(undefined behaviour).
Fix this by calling rcu_barrier() in cuse_exit() so that any pending
fuse_conn release callback completes before the module is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: check for NULL root inode in fuse_fill_super_submount
fuse_iget() can return NULL when its inode allocation fails, but
fuse_fill_super_submount() passed the result straight to get_fuse_inode()
and decremented fi->nlookup without checking it:
root = fuse_iget(sb, parent_fi->nodeid, ...);
fi = get_fuse_inode(root);
fi->nlookup--;
Inside fuse_iget() the inode allocation can fail and return NULL. The
submount root takes the iget5_locked() path, whose alloc_inode() can fail
under memory pressure (the auto-submount branch can fail the same way in
new_inode() or fuse_alloc_submount_lookup()):
inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set,
&nodeid);
if (!inode)
return NULL;
A NULL root makes get_fuse_inode() a container_of() on NULL and the
nlookup decrement a write to a bogus address, oopsing the mount. With
CONFIG_KASAN the following null pointer dereference is reported when the
root inode allocation of an auto-submount fails (e.g. under memory
pressure):
==================================================================
BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0
Read of size 8 at addr 00000000000002b0 by task ls/942
CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15
Call Trace:
<TASK>
fuse_get_tree_submount+0x656/0x8b0
vfs_get_tree+0x48/0x140
fc_mount+0x13/0x50
fuse_dentry_automount+0x7a/0xb0
__traverse_mounts+0xca/0x330
step_into+0x339/0xac0
path_lookupat+0xc5/0x2f0
filename_lookup+0x163/0x2a0
vfs_statx+0xd5/0x200
do_statx+0x83/0xd0
__x64_sys_statx+0xa0/0xc0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x78/0xe2
</TASK>
==================================================================
Return -ENOMEM instead; the caller tears down the partially built
superblock on error, matching the other error returns in this
function. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: fix wrong list iterated in add_direct_chain error path
In add_direct_chain(), newly allocated direct MR entries are added to
the local list 'tmp', which is spliced into mr->head only on success.
On the error path, the cleanup loop was incorrectly iterating over
mr->head instead of tmp.
Fix by iterating over 'tmp' in the err_alloc cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: rtc: time out alarm requests
RTC class operations run with rtc_device.ops_lock held. The virtio RTC
alarm requests currently wait without a timeout for the device to return
their requestq buffers.
On surprise removal, virtio-pci marks the virtqueues broken before
unregistering the virtio device. If an alarm request is waiting when the
device stops responding, viortc_remove() blocks in viortc_class_stop()
while trying to acquire ops_lock. The request cannot complete and device
removal hangs until the waiting task is signalled.
Use the same 60-second timeout as clock read requests for alarm reads,
alarm programming, and alarm interrupt enable requests. The existing
message reference counting keeps a timed-out request alive until a late
response or device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf8563: fix clock provider leak on unbind
pcf8563_clkout_register_clk() registers the CLKOUT clock provider with
of_clk_add_provider(), but nothing ever unwinds it: there is no
of_clk_del_provider() call and the driver has no remove callback. Each
of_clk_add_provider() allocates a struct of_clk_provider, takes a
reference on the OF node and adds an entry to the global of_clk_providers
list, none of which is released when the device is unbound. Every
bind/unbind (or module reload) therefore leaks a provider structure and
an of_node reference.
The clock itself is already device-managed (devm_clk_register()); only
the provider registration was not. Use devm_of_clk_add_hw_provider() so
the provider is removed automatically on unbind. Tie it to the parent
i2c device, whose OF node carries the #clock-cells and clock-output-names
properties (the RTC class device has no OF node of its own). |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/renesas-rzg2l: Fix loss of interrupt
rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a
read-modify-write on the ISCR/TSCR status registers to clear the bit
for the interrupt just handled. Since these registers are
write-0-to-clear per bit, this is racy:
If another interrupt's status bit gets set between the read and the write,
that bit is written back as 0 by the software-constructed value, clearing
an interrupt that hasn't been serviced yet and losing it.
This can be reproduced by triggering multiple interrupts at once, e.g.:
gpioset -c gpiochip0 355=0 353=0 328=0 352=0
Fix this by writing back only the bit being cleared, with all other bits
set to 1, instead of read-modify-writing the whole register. Since 1-bits
are left unchanged by hardware, concurrently-set status bits for other
interrupts are preserved. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Clear per-CPU IRS data on teardown
IRS affinity setup publishes an IRS pointer and IAFFID state in the
per-CPU data before the remaining IRS initialization can fail. The
error path then frees the IRS data without clearing that published
state, leaving CPUs associated with freed memory.
On initialization failure and normal IRS teardown, clear the per-CPU
IRS association by removing the stale pointer to irs_data. Also
invalidate the per-CPU IAFFID state for any CPUs that were tied to the
IRS before it was freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup
snd_ice1712_probe() performs multiple initialization steps after
snd_card_new(), but directly returns on failures from later steps
without releasing the ALSA card, causing resource leaks when
probing fails.
Use snd_devm_card_new() together with scope-based cleanup
via __free(snd_card_unref), and clear the card pointer after
successful registration to keep it alive. |
