| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the tunnel link netns t->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in
net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is
skipped when the link netns is dev_net(dev), where the rtnl path already
checked it. The other patches in this series use the same helper.
Gate ipgre_changelink() and erspan_changelink() with it, at the top of
the op before any attribute is parsed, because the parsers update live
tunnel fields first. ipgre_netlink_parms() sets t->collect_md before
ip_tunnel_changelink() runs.
Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in
vti6_siocdevprivate().") added the same check on the ioctl path. This
adds it on RTM_NEWLINK. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: mediate the implicit connect of TCP fast open sendmsg
sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and
write(2): it opens the connection in the SYN. apparmor_socket_sendmsg()
only checks AA_MAY_SEND, so a profile that grants send but denies connect
lets a confined task open an outbound TCP/MPTCP connection that connect(2)
would have refused, bypassing connect mediation.
Mediate the implicit connect when MSG_FASTOPEN is set and a destination
is supplied. Add it to apparmor_socket_sendmsg() (not the shared
aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()
directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not
cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix use-after-free in rawdata dedup loop
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fix use-after-free in store_modes()
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
gcov: use atomic counter updates to fix concurrent access crashes
GCC's GCOV instrumentation can merge global branch counters with loop
induction variables as an optimization. In inflate_fast(), the inner copy
loops get transformed so that the GCOV counter value is loaded multiple
times to compute the loop base address, start index, and end bound. Since
GCOV counters are global (not per-CPU), concurrent execution on different
CPUs causes the counter to change between loads, producing inconsistent
values and out-of-bounds memory writes.
The crash manifests during IPComp (IP Payload Compression) processing when
inflate_fast() runs concurrently on multiple CPUs:
BUG: unable to handle page fault for address: ffffd0a3c0902ffa
RIP: inflate_fast+1431
Call Trace:
zlib_inflate
__deflate_decompress
crypto_comp_decompress
ipcomp_decompress [xfrm_ipcomp]
ipcomp_input [xfrm_ipcomp]
xfrm_input
At the crash point, the compiler generated three loads from the same
global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and
end for an indexed loop. Another CPU modified the counter between loads,
making the values inconsistent - the write went 3.4 MB past a 65 KB
buffer.
Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in
the top-level Makefile, guarded by a try-run compile test. The test
compiles a minimal program with and without -fprofile-update=prefer-atomic
using the full KBUILD_CFLAGS, then compares undefined symbols in the
resulting object files. If prefer-atomic introduces new undefined
references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax
on arm64 with outline-atomics), the flag is not added -- the kernel does
not link against libatomic.
On architectures where GCC inlines 64-bit atomic counter updates (x86_64,
s390, ...) the test passes and the flag is enabled, preventing the
compiler from merging counters with loop induction variables and fixing
the observed concurrent-access crash.
On architectures where the flag would introduce libatomic dependencies, it
is silently omitted and behaviour is no worse than before this patch.
Move the CFLAGS_GCOV block from its original position (before the arch
Makefile include) to after the core KBUILD_CFLAGS assignments but before
the scripts/Makefile.gcc-plugins include. This placement ensures the
try-run test sees arch-specific flags (-m32, -march=,
-mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that
would break the test on clean builds when plugin shared objects do not yet
exist. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: fix overflow in keyctl_pkey_params_get_2()
The length for the internal output buffer is calculated incorrectly, which
can result overflow when a too small buffer is provided.
Fix the bug by allocating internal output with the size of the maximum
length of the cryptographic primitive instead of caller provided size. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Pin request_key_auth payload in instantiate paths
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix warning when unbinding
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: fix memory leaks on USB write failures
When rtw_usb_write_port() fails to submit a USB Request Block (URB)
(e.g., due to device disconnect or ENOMEM), the completion callback is
never executed.
Currently, the driver ignores the return value of rtw_usb_write_port()
in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these
functions rely on the completion callback to free the socket buffers
(skbs) and the transaction control block (txcb), a submission failure
results in:
1. A memory leak of the allocated skb in rtw_usb_write_data().
2. A memory leak of the txcb structure and all aggregated skbs in
rtw_usb_tx_agg_skb().
Fix this by checking the return value of rtw_usb_write_port(). If it
fails, explicitly free the skb in rtw_usb_write_data(), and properly
purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb().
The issue was discovered in practice during device disconnect/reconnect
scenarios and memory pressure conditions. Tested by verifying normal TX
operation continues after the fix without regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix missing read bio submission on large folio error
f2fs_read_data_large_folio() can keep a read bio across multiple
readahead folios. If a later folio hits an error before any of its
blocks are added to the bio, folio_in_bio is false and the current error
path returns immediately after ending that folio.
This can leave the bio accumulated for earlier folios unsubmitted. Those
folios then never receive read completion, and readers can wait
indefinitely on the locked folios.
Route errors through the common out path so any pending bio is submitted
before returning. Stop consuming more readahead folios once an error is
seen, and only wait on and clear the current folio when it was actually
added to the bio. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on f2fs_get_node_folio_ra()
kernel BUG at fs/f2fs/file.c:845!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845
Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90
RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283
RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000
RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504
RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002
R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c
FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0
Call Trace:
<TASK>
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882
f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940
f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907
evict+0x61e/0xb10 fs/inode.c:841
f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224
get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694
vfs_get_tree+0x92/0x2a0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3758 [inline]
do_new_mount+0x341/0xd30 fs/namespace.c:3834
do_mount fs/namespace.c:4167 [inline]
__do_sys_mount fs/namespace.c:4383 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4360
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
count = ADDRS_PER_PAGE(dn.node_folio, inode);
count -= dn.ofs_in_node;
f2fs_bug_on(sbi, count < 0);
The fuzz test will trigger above bug_on in f2fs.
The root cause should be: in the corrupted inode, there is a direct node
which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(),
after f2fs_get_dnode_of_data() finds such dnode:
1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923
2) once dn.ofs_in_node points to addr[923, 1017]
Then it will trigger the system panic.
Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should
not be an inode or xattr node, and then use it in below path to detect
inconsistent node chain in inode mapping table:
- f2fs_do_truncate_blocks
- f2fs_get_dnode_of_data
- f2fs_get_node_folio_ra
- __get_node_folio
- f2fs_sanity_check_node_footer
- case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate orphan inode entry count
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate compress cache inode only when enabled
F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode
number for the compressed page cache inode. That inode only exists when
the compress_cache mount option is enabled.
When compress_cache is disabled, max_nid is outside the valid inode
range. A corrupted directory entry that points to ino == max_nid should
therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino()
currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally,
so f2fs_iget() bypasses do_read_inode() and its nid range check, and
instantiates a fake internal inode instead.
Gate the compressed cache inode case on COMPRESS_CACHE, matching
f2fs_init_compress_inode(). With compress_cache disabled, ino ==
max_nid now follows the normal inode path and is rejected as an
out-of-range nid. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
When the flexible_inline_xattr feature is enabled, do_read_inode() loads
the on-disk i_inline_xattr_size unconditionally:
if (f2fs_sb_has_flexible_inline_xattr(sbi))
fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size);
but sanity_check_inode() only range-checks it when the inode also has the
FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline
data but not FI_INLINE_XATTR -- the normal layout for an inline
directory -- therefore keeps a fully attacker-controlled
i_inline_xattr_size from a crafted image.
get_inline_xattr_addrs() returns that value with no flag gating, so it
feeds the inode geometry:
MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1)
NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...)
addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size
A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY()
negative, so make_dentry_ptr_inline() sets d->max (int) to a negative
value. The inline directory walk then compares an unsigned long bit_pos
against that negative d->max, which is promoted to a huge unsigned bound,
and reads far past the inline area:
while (bit_pos < d->max) /* fs/f2fs/dir.c */
... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ...
Mounting a crafted image and reading such a directory triggers an
out-of-bounds read in f2fs_fill_dentries(); the same underflow also
corrupts ADDRS_PER_INODE for regular files.
Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the
flexible_inline_xattr feature is enabled -- i.e. whenever the value is
loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE
bound gated on inodes that actually carry an inline xattr, so legitimate
inodes with i_inline_xattr_size == 0 are still accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
f2fs_acl_count() only validates the aggregate ACL xattr length. A
malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only
contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk()
then reads entry->e_id before verifying that a full entry fits.
Require a short entry before reading e_tag and e_perm, and require a
full entry before reading e_id for ACL_USER and ACL_GROUP. Return
-EFSCORRUPTED from these new truncated-entry checks, while keeping the
pre-existing -EINVAL paths unchanged.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0
RIP: 0033:0x7f4b835ea7aa
The buggy address belongs to the object at ffff888114589960 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 8-byte
region [ffff888114589960, ffff888114589968)
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
__f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x224/0x430 (?:?)
kasan_report+0xe0/0x110 (?:?)
__f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169)
__get_acl+0x281/0x380 (?:?)
vfs_get_acl+0x10b/0x190 (?:?)
do_get_acl+0x2a/0x410 (?:?)
do_get_acl+0x9/0x410 (?:?)
do_getxattr+0xe8/0x260 (?:?)
filename_getxattr+0xd1/0x140 (?:?)
do_getname+0x2d/0x2d0 (?:?)
path_getxattrat+0x16c/0x200 (?:?)
lock_release+0xc8/0x290 (?:?)
cgroup_update_frozen+0x9d/0x320 (?:?)
lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?)
trace_hardirqs_on+0x1a/0x170 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
This reverts commit 9609dd704725a40cd63d915f2ab6c44248a44598.
The kernel panics are keeping to be reported especially when the f2fs
partition get almost full. By investigation, we find that the reason is
one f2fs page got freed to buddy without being deleted from LRU and the
root cause is the race happened in [2] which is enrolled by this commit.
There are 3 race processes in this scenario, please find below for their
main activities.
The changed code in move_data_block() lets the GC path evict the tail-end
folio from the page cache through folio_end_dropbehind(). Once
folio_unmap_invalidate() removes the folio from mapping->i_pages, the
page-cache references for all pages in the folio are dropped. The folio
is then kept alive only by temporary external references, which allows a
later split to operate on a folio whose subpages are no longer protected
by page-cache references.
After the page-cache references are gone, split_folio_to_order() can
split the big folio into individual pages and put the resulting subpages
back on the LRU. For tail pages beyond EOF, split removes them from the
page cache and drops their page-cache references. A tail page can then
remain on the LRU with PG_lru set while holding only the split caller's
temporary reference. When free_folio_and_swap_cache() drops that final
reference, the page enters the final folio_put() release path.
In parallel, folio_isolate_lru() can observe the same tail page with a
non-zero refcount and PG_lru set. It clears PG_lru before taking its own
reference. If this races with the final folio_put() from the split path,
__folio_put() sees PG_lru already cleared and skips lruvec_del_folio().
The page is then freed back to the allocator while its lru links are
still present in the LRU list. A later LRU operation on a neighboring
page detects the stale link and reports list corruption.
[1]
[ 22.486082] list_del corruption. next->prev should be fffffffec10e0ac8, but was dead000000000122. (next=fffffffec10e0a88)
[ 22.486130] ------------[ cut here ]------------
[ 22.486134] kernel BUG at lib/list_debug.c:67!
[ 22.486141] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 22.488502] Tainted: [W]=WARN, [O]=OOT_MODULE
[ 22.488506] Hardware name: Spreadtrum UMS9230 1H10 SoC (DT)
[ 22.488511] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 22.488517] pc : __list_del_entry_valid_or_report+0x14c/0x154
[ 22.488531] lr : __list_del_entry_valid_or_report+0x14c/0x154
[ 22.488539] sp : ffffffc08006b830
[ 22.488542] x29: ffffffc08006b868 x28: 0000000000003020 x27: 0000000000000000
[ 22.488553] x26: 0000000000000000 x25: 0000000000000004 x24: fffffffec10e0ac0
[ 22.488564] x23: 00000000000000e8 x22: 0000000000000024 x21: dead000000000122
[ 22.488574] x20: fffffffec10e0a88 x19: fffffffec10e0ac8 x18: ffffffc080061060
[ 22.488585] x17: 20747562202c3863 x16: 6130653031636566 x15: 0000000000000058
[ 22.488595] x14: 0000000000000004 x13: ffffff80f91e0000 x12: 0000000000000003
[ 22.488605] x11: 0000000000000003 x10: 0000000000000001 x9 : ffe85721f0e25f00
[ 22.488615] x8 : ffe85721f0e25f00 x7 : 0000000000000000 x6 : 6c65645f7473696c
[ 22.488625] x5 : ffffffed39b23026 x4 : 0000000000000000 x3 : 0000000000000010
[ 22.488636] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000006d
[ 22.488647] Call trace:
[ 22.488651] __list_del_entry_valid_or_report+0x14c/0x154 (P)
[ 22.488661] __folio_put+0x2bc/0x434
[ 22.488670] folio_put+0x28/0x58
[ 22.488678] do_garbage_collect+0x1a34/0x2584
[ 22.488689] f2fs_gc+0x230/0x9b4
[ 22.488697] f2fs_fallocate+0xb90/0xdf4
[ 22.488706] vfs_fallocate+0x1b4/0x2bc
[ 22.488716] __arm64_sys_fallocate+0x44/0x78
[ 22.488725] invoke_syscall+0x58/0xe4
[ 22.488732] do_el0_svc+0x48/0xdc
[ 22.488739] el0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does
not reset the length of the largest extent to 0 and update the inode
folio. Since modifications to the extent tree are disallowed afterward,
the cached largest extent may become stale. This can trigger the
following error in xfstests generic/388:
F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix
In the f2fs_drop_inode path, __destroy_extent_node() does not need to
guarantee that et->node_cnt is 0, because concurrency with writeback
is expected in this path, and writeback may update the extent cache.
This patch reverts commit ed78aeebef05 ("f2fs: fix node_cnt race between
extent node destroy and writeback"), and remove the unnecessary zero
check of et->node_cnt. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: read COW data with the original inode during atomic write
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: Avoid mounting the bdev pseudo-filesystem in userspace
The bdev pseudo-filesystem is an internal kernel filesystem with which
userspace should not interfere. Unregister it so that userspace cannot
even attempt to mount it.
This fixes a bug [1] that occurs when attempting to access files,
because the system call move_mount() uses pointers declared in the
inode_operations structure, which for the bdev pseudo-filesystem
are always equal to 0. `inode->i_op = &empty_iops;`
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 23380067 P4D 23380067 PUD 23381067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI
CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:0x0
Call Trace:
<TASK>
lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460
open_last_lookups fs/namei.c:3550 [inline]
path_openat+0x953/0x2700 fs/namei.c:3780
do_filp_open+0x1c5/0x410 fs/namei.c:3810
do_sys_openat2+0x171/0x4d0 fs/open.c:1318
do_sys_open fs/open.c:1334 [inline]
__do_sys_openat fs/open.c:1350 [inline]
__se_sys_openat fs/open.c:1345 [inline]
__x64_sys_openat+0x13c/0x1f0 fs/open.c:1345
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
