| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incomplete cleanup in SiteIsolation in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
Previously, rmi_f54_buffer_queue() waited for the worker thread to
finish but ignored whether it succeeded. If the worker failed (e.g.,
due to a timeout or register read failure), the queue thread would
silently return success, delivering stale or uninitialized memory to
userspace.
Add a 'report_error' field to struct f54_data to store the worker's exit
status. Check this field in rmi_f54_buffer_queue() after the worker
finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error
occurred. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak
In papr_phy_attest_create_handle(), the params->cmd.length is not
validated before use, which can result in a buffer overlow. Check it and
return -EINVAL if it is either 0 or exceeds sizeof(params->cmd).
Also, params is freed on the success path but not error. Free it on
errors after memory allocation. And free it on negative fd. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cs40l50-vibra - validate custom data from user space
cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect
straight from the ff_effect the user passed to EVIOCSFF, without
requiring it to hold anything:
work_data.custom_data = memdup_array_user(periodic->custom_data,
periodic->custom_len,
sizeof(s16));
work_data.custom_len = periodic->custom_len;
The driver then reads two words out of that buffer: custom_data[0] as the
waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the
index within the bank in cs40l50_effect_index_set(). Neither read is
covered by a length check, and custom_len is fully user controlled:
- custom_len == 0 makes memdup_array_user() call memdup_user() with a
length of zero, which returns ZERO_SIZE_PTR rather than an error, so
custom_data[0] dereferences it.
- custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps
effect->type out of the OWT case, and custom_data[1] is then read one
word past the allocation.
The bank value itself is also mishandled. It is masked with
CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a
custom_data[0] of 0x8000 or above wraps to a negative value that passes
the "bank_type >= CS40L50_WVFRM_BANK_NUM" test.
cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the
switch statement's default case gets a chance to reject it:
base_index = vib->dsp.banks[effect->type].base_index;
max_index = vib->dsp.banks[effect->type].max_index;
Require the two words the driver reads to be present, and hold the masked
bank in a u32 so the existing upper-bound test covers the whole range.
The da7280 haptic driver already range checks custom_len this way. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: clear fb_info->mode before deleting a videomode
fb_set_var() can delete a mode from info->modelist when userspace
passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code
checks that the mode being deleted is not the current info->var and
that fbcon is not using it, but it does not check fb_info->mode.
fb_info->mode may still point into the modelist entry being deleted.
If the entry is freed, later mode sysfs reads through show_mode() can
dereference a stale pointer.
Clear fb_info->mode before calling fb_delete_videomode() when it
matches the mode being removed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/shmem_helper: Check VMA boundaries for PMD mappings
In the ->huge_fault handler do not install a PMD huge page
mapping if the huge page exceeds the boundaries of the VMA.
All other ->huge_fault handlers have similar checks and the
resulting mapping will trigger a VM_BUG_ON_VMA() if it ever
reaches copy_pmd_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| The Shared Files WordPress plugin before 1.7.67, shared-files-pro WordPress plugin before 1.7.68 do not properly sanitize a file path taken from a frontend file submission and their single-pass traversal filter is bypassable, allowing unauthenticated users to store a path that points outside the uploads directory. When the corresponding file entry is later permanently deleted, an arbitrary file on the server (such as wp-config.php) is deleted, leading to denial of service and potential site takeover. |
| The Shared Files WordPress plugin before 1.7.67, shared-files-pro WordPress plugin before 1.7.70 do not perform a capability check in their file-upload handler, which is registered for unauthenticated users and protected only by a nonce that is output on public pages, so an unauthenticated visitor can upload files to a publicly accessible directory and read the server's absolute path from the response. Uploads are limited to WordPress's allowed MIME types, so executable PHP cannot be uploaded. |
| The WCFM Marketplace WordPress plugin before 3.8.2 does not correctly verify that the person requesting a refund owns the order, allowing unauthenticated users to create refund requests against any guest checkout order on the site. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: wake linked drain waiters on unlink
snd_pcm_drain() on a linked stream parks an on-stack wait entry on the
drained peer's runtime->sleep, and after schedule_timeout() removes it
only if that peer is still found in the caller's group. If group
membership changes during the wait and the sleep ends by signal or
timeout (so autoremove_wake_function() does not run), finish_wait() is
skipped and snd_pcm_drain() returns with the entry still queued on that
stream's sleep list; a later wake_up() then walks a freed stack frame.
This is reachable by unlinking either the drained or the draining stream.
Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()),
snd_pcm_unlink() never wakes the sleep queues. Wake every group member
under the group lock before the membership change, so a linked drainer is
released and drops its entry while the streams are still grouped.
The window was opened when snd_pcm_link_rwsem stopped being held across
the wait and the removal became conditional on group membership (see
Fixes). The later switch to finish_wait() kept that conditional removal,
so the signal/timeout case remained. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: add a separate bio_set for iomap_split_ioend
iomap_split_ioend can split bios that already come from
iomap_ioend_bioset and thus deadlock when the bioset is exhausted.
Add a separate bio_set to avoid this deadlock.
Christian Brauner <brauner@kernel.org> says:
Mark iomap_ioend_split_bioset static as it is only used in ioend.c,
fixing the sparse warning reported by the kernel test robot. |
| ServiceNow has remediated an improper access control vulnerability that was identified in the ServiceNow AI platform. This vulnerability could enable an unauthenticated user, in certain circumstances, to create or modify instance data beyond what was intended, resulting in privilege escalation.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of exploitation against ServiceNow instances.
We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| In Bluetooth Mesh SDK 6.1.4 and earlier, malformed extended advertisements can trigger out-of-bounds writes leading to stack corruption and remote code execution. These messages must come from a device that has already joined the network. Only provisioners supporting extended advertisements may be impacted. |
| Information leak in Canvas in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: High) |
| UI misrepresentation in Browser in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Improper neutralization of delimiters in connection-URL construction allows connection-option injection in the MongoDB C# Driver. When an application passes untrusted text into the driver's connection-URL builder and round-trips the builder back into a client configuration, the untrusted text is serialized without neutralizing the URL/option delimiters and is then re-parsed as authoritative connection options. A low-privileged user of such an application can thereby introduce or suppress security-relevant connection settings. |
| Silverstripe UserForms provides a visual form builder for the Silverstripe CMS. From 6.0.0 until 6.4.9, 7.0.7, and 7.1.1, the userform email recipient subject field in the CMS accepts a specially crafted payload that can be interpreted as executable server-side code. An authenticated CMS user with permission to configure a UserForms email recipient can use the subject field to run arbitrary code on the server, compromising confidentiality, integrity, and availability. This issue is fixed in versions 6.4.9, 7.0.7, and 7.1.1. |
| Trilium is an open-source hierarchical note-taking application. In versions up to and including 0.103.0, the default-on "Safe import" filter sanitizes HTML only for text notes and excludes the book note type, whose content is stored without sanitization and later rendered as HTML, allowing an attacker-supplied import archive to embed a payload that executes as script. A book note's content is routed through the same rendering path as text notes and injected into the page with jQuery's html method when the note is shown as a grid-view preview card, so a malicious note survives Safe import and runs as soon as the victim opens the containing note. On the desktop client the Electron renderer runs with Node integration enabled, so the injected JavaScript escalates from cross-site scripting to full remote code execution on the victim's machine. This issue is fixed in version 0.104.0. |
| An authenticated OS command injection vulnerability exists in ZoneMinder's event export functionality. The exportFile HTTP request parameter is passed unsanitized into a shell command executed via PHP's exec(), allowing any authenticated user with View Events permission to execute arbitrary operating system commands on the server. |
