| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cross-Site Request Forgery (CSRF) vulnerability in storeapps Stock Manager for WooCommerce woocommerce-stock-manager allows Cross Site Request Forgery.This issue affects Stock Manager for WooCommerce: from n/a through < 3.6.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThimPress LearnPress – Course Review learnpress-course-review allows Stored XSS.This issue affects LearnPress – Course Review: from n/a through <= 4.1.9. |
| Server-Side Request Forgery (SSRF) vulnerability in Craig Hewitt Seriously Simple Podcasting seriously-simple-podcasting allows Server Side Request Forgery.This issue affects Seriously Simple Podcasting: from n/a through <= 3.14.1. |
| Undici is an HTTP/1.1 client for Node.js. Prior to 7.18.0 and 6.23.0, the number of links in the decompression chain is unbounded and the default maxHeaderSize allows a malicious server to insert thousands compression steps leading to high CPU usage and excessive memory allocation. This vulnerability is fixed in 7.18.0 and 6.23.0. |
| When passing data to the b64decode(), standard_b64decode(), and urlsafe_b64decode() functions in the "base64" module the characters "+/" will always be accepted, regardless of the value of "altchars" parameter, typically used to establish an "alternative base64 alphabet" such as the URL safe alphabet. This behavior matches what is recommended in earlier base64 RFCs, but newer RFCs now recommend either dropping characters outside the specified base64 alphabet or raising an error. The old behavior has the possibility of causing data integrity issues.
This behavior can only be insecure if your application uses an alternate base64 alphabet (without "+/"). If your application does not use the "altchars" parameter or the urlsafe_b64decode() function, then your application does not use an alternative base64 alphabet.
The attached patches DOES NOT make the base64-decode behavior raise an error, as this would be a change in behavior and break existing programs. Instead, the patch deprecates the behavior which will be replaced with the newly recommended behavior in a future version of Python. Users are recommended to mitigate by verifying user-controlled inputs match the base64
alphabet they are expecting or verify that their application would not be
affected if the b64decode() functions accepted "+" or "/" outside of altchars. |
| A flaw was found in the integration of Active Directory and the System Security Services Daemon (SSSD) on Linux systems. In default configurations, the Kerberos local authentication plugin (sssd_krb5_localauth_plugin) is enabled, but a fallback to the an2ln plugin is possible. This fallback allows an attacker with permission to modify certain AD attributes (such as userPrincipalName or samAccountName) to impersonate privileged users, potentially resulting in unauthorized access or privilege escalation on domain-joined Linux hosts. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority as a duplicate. |
| Sony BRAVIA Digital Signage 1.7.8 contains an insecure direct object reference vulnerability that allows attackers to bypass authorization controls. Attackers can access hidden system resources like '/#/content-creation' by manipulating client-side access restrictions. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the Periodic Packet Management Daemon (ppmd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a
Denial-of-Service (DoS).
When a BFD session configured with authentication flaps, ppmd memory can leak. Whether the leak happens depends on a race condition which is outside the attackers control. This issue only affects BFD operating in distributed aka delegated (which is the default behavior) or inline mode.
Whether the leak occurs can be monitored with the following CLI command:
> show ppm request-queue
FPC Pending-request
fpc0 2
request-total-pending: 2
where a continuously increasing number of pending requests is indicative of the leak.
This issue affects:
Junos OS:
* All versions before 21.2R3-S8,
* 21.4 versions before 21.4R3-S7,
* 22.1 versions before 22.1R3-S4,
* 22.2 versions before 22.2R3-S4,
* 22.3 versions before 22.3R3,
* 22.4 versions before 22.4R2-S2, 22.4R3.
Junos OS Evolved:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-EVO,
* 22.4-EVO versions before 22.4R3-EVO. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.5 before 18.5.5, 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an authenticated user to modify instance-wide AI feature provider settings by exploiting missing authorization checks in GraphQL mutations. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
When a device has a Layer 3 or an IRB interface configured in a VPLS instance and specific traffic is received, the evo-pfemand processes crashes which causes a service outage for the respective FPC until the system is recovered manually.
This issue only affects Junos OS Evolved 22.4R2-S1 and 22.4R2-S2 releases and is fixed in 22.4R3. No other releases are affected. |
| An Unimplemented or Unsupported Feature in the UI vulnerability in Juniper Networks Junos OS on QFX5000 Series and EX4600 Series allows an unauthenticated, network-based attacker to cause a minor integrity impact to downstream networks.If one or more of the following match conditions
ip-source-address
ip-destination-address
arp-type
which are not supported for this type of filter, are used in an ethernet switching filter, and then this filter is applied as an output filter, the configuration can be committed but the filter will not be in effect.
This issue affects Junos OS on QFX5000 Series and EX4600 Series:
* All version before 21.2R3-S7,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2.
Please note that the implemented fix ensures these unsupported match conditions cannot be committed anymore. |
| An issue in Passy v.1.6.3 allows a remote authenticated attacker to execute arbitrary commands via a crafted HTTP request using a specific payload injection. |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.
A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. |
| Incorrect access control in the /member/orderList API of xmall v1.1 allows attackers to arbitrarily access other users' order details via manipulation of the query parameter userId. |
| During an annual penetration test conducted on behalf of Axis Communication, Truesec discovered a flaw in the ACAP Application framework that allowed applications to access restricted D-Bus methods within the framework.
Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| During an annual penetration test conducted on behalf of Axis Communication, Truesec discovered a flaw in the VAPIX Device Configuration framework that could lead to an incorrect user privilege level in the VAPIX service account D-Bus API. |
| A vulnerability has been identified in TeleControl Server Basic (All versions < V3.1.2.4). Affected application contains a local privilege escalation vulnerability that could allow an attacker to run arbitrary code with elevated privileges. |
| A vulnerability was identified in quickjs-ng quickjs up to 0.11.0. This issue affects the function js_typed_array_sort of the file quickjs.c. The manipulation leads to heap-based buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The identifier of the patch is 53eefbcd695165a3bd8c584813b472cb4a69fbf5. To fix this issue, it is recommended to deploy a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
When qstats-get operation is executed, callbacks of netdev_stats_ops
are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats
from sw_stats in the rings.
But {rx | tx | cp}_ring are allocated when the interface is up.
So, these rings are not allocated when the interface is down.
The qstats-get is allowed even if the interface is down. However,
the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring
without null check.
So, it needs to avoid accessing rings if the interface is down.
Reproducer:
ip link set $interface down
./cli.py --spec netdev.yaml --dump qstats-get
OR
ip link set $interface down
python ./stats.py
Splat looks like:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ #32 5cd0f999d5a15c574ac72b3e4b907341
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en]
Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01
RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000
RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000
RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c
R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000
R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000
FS: 00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15a/0x460
? sched_balance_find_src_group+0x58d/0xd10
? exc_page_fault+0x6e/0x180
? asm_exc_page_fault+0x22/0x30
? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1]
netdev_nl_stats_by_netdev+0x2b1/0x4e0
? xas_load+0x9/0xb0
? xas_find+0x183/0x1d0
? xa_find+0x8b/0xe0
netdev_nl_qstats_get_dumpit+0xbf/0x1e0
genl_dumpit+0x31/0x90
netlink_dump+0x1a8/0x360 |
