| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Babel is a compiler for writing next generation JavaScript. From 7.12.0 to before 7.29.4 and 8.0.0-alpha.13, using Babel to compile code that was specifically crafted by an attacker can cause Babel to generate output code that executes arbitrary code. This vulnerability is fixed in 7.29.4 and 8.0.0-alpha.13. |
| IBM Web Server Plug-ins for WebSphere Application Server and WebSphere Liberty 8.5, 9.0 IBM WebSphere Application Server and WebSphere Application Server Liberty are vulnerable to HTTP request smuggling in the Web Server Plug-ins through a specially crafted request. |
| A vulnerability was identified in teableio teable up to 1.9.x. This impacts an unknown function of the file apps/nextjs-app/src/features/auth/pages/LoginPage.tsx of the component Sign-up. The manipulation of the argument redirect leads to cross site scripting. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. Upgrading to version release.2026-04-21T08-57-20Z.1513 will fix this issue. The affected component should be upgraded. The vendor confirms: "The default branch of teableio/teable is develop, and the reported login redirect issue has already been fixed there. The login redirect flow now validates the redirect parameter with isValidRedirectPath() before navigation, which blocks javascript:, data:, and cross-origin redirects." |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Networking). Supported versions that are affected are Oracle Java SE: 11.0.16.1, 17.0.4.1, 19; Oracle GraalVM Enterprise Edition: 20.3.7, 21.3.3 and 22.2.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to a denial-of-service attack due to uncontrolled recursion in the Integrated Language Environment (ILE) compiler. An authenticated attacker could exploit this vulnerability by compiling specially crafted source code containing a specific combination of statements. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables. |
| Improperly built filter clauses lead to a SQL injection vulnerability in the search query for com_finder. |
| The EventPress WordPress theme before 22.2 does not sanitize or escape the 'id' parameter in the eventpress_customizer_notify_dismiss_action AJAX handler before outputting it back in the response, allowing unauthenticated attackers to perform Reflected Cross-Site Scripting attacks against logged-in users. |
| Vanetza is an open-source implementation of the ETSI C-ITS protocol suite. In 26.02 and earlier, a denial-of-service vulnerability was identified in the cryptographic verification pipeline of Vanetza. When processing incoming V2X messages, the ASN.1 decoder accepts the structure as syntactically valid. However, this reveals a logic-based protocol failure where semantic constraints on specific fields are only strictly enforced during OER re-encoding. Specifically, if a crafted packet contains a certificate where the Psid (Provider Service Identifier) sub-type violates subtype constraints (e.g., out-of-range or invalid CHOICE variant), it is accepted during initial parsing, where subtype constraints are not enforced. Later, when StraightVerifyService attempts to calculate a message hash for cryptographic verification, it must re-encode the signing certificate. The underlying ASN.1 wrapper (asn1c_wrapper.cpp) detects the semantic violation during encoding and raises a std::runtime_error. This exception is not caught within the encoding path and propagates to std::terminate, resulting in immediate process termination. This vulnerability is fixed with commit e1a2e2709210d309458c3d77f98d50dec26c0df0. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in ZAYTECH Smart Online Order for Clover clover-online-orders allows Authentication Bypass.This issue affects Smart Online Order for Clover: from n/a through <= 1.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: strparser: fix skb_head leak in strp_abort_strp()
When the stream parser is aborted, for example after a message assembly timeout,
it can still hold a reference to a partially assembled message in
strp->skb_head.
That skb is not released in strp_abort_strp(), which leaks the partially
assembled message and can be triggered repeatedly to exhaust memory.
Fix this by freeing strp->skb_head and resetting the parser state in the
abort path. Leave strp_stop() unchanged so final cleanup still happens in
strp_done() after the work and timer have been synchronized. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: reject zero shift in nft_bitwise
Reject zero shift operands for nft_bitwise left and right shift
expressions during initialization.
The carry propagation logic computes the carry from the adjacent 32-bit
word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this
into a 32-bit shift, which is undefined behaviour.
Reject zero shift operands in the control plane, alongside the existing
check for values greater than or equal to 32, so malformed rules never
reach the packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: afs: revert mmap_prepare() change
Partially reverts commit 9d5403b1036c ("fs: convert most other
generic_file_*mmap() users to .mmap_prepare()").
This is because the .mmap invocation establishes a refcount, but
.mmap_prepare is called at a point where a merge or an allocation failure
might happen after the call, which would leak the refcount increment.
Functionality is being added to permit the use of .mmap_prepare in this
case, but in the interim, we need to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels
seg6_input_core() and rpl_input() call ip6_route_input() which sets a
NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking
dst_hold() unconditionally.
On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can
release the underlying pcpu_rt between the lookup and the caching
through a concurrent FIB lookup on a shared nexthop.
Simplified race sequence:
ksoftirqd/X higher-prio task (same CPU X)
----------- --------------------------------
seg6_input_core(,skb)/rpl_input(skb)
dst_cache_get()
-> miss
ip6_route_input(skb)
-> ip6_pol_route(,skb,flags)
[RT6_LOOKUP_F_DST_NOREF in flags]
-> FIB lookup resolves fib6_nh
[nhid=N route]
-> rt6_make_pcpu_route()
[creates pcpu_rt, refcount=1]
pcpu_rt->sernum = fib6_sernum
[fib6_sernum=W]
-> cmpxchg(fib6_nh.rt6i_pcpu,
NULL, pcpu_rt)
[slot was empty, store succeeds]
-> skb_dst_set_noref(skb, dst)
[dst is pcpu_rt, refcount still 1]
rt_genid_bump_ipv6()
-> bumps fib6_sernum
[fib6_sernum from W to Z]
ip6_route_output()
-> ip6_pol_route()
-> FIB lookup resolves fib6_nh
[nhid=N]
-> rt6_get_pcpu_route()
pcpu_rt->sernum != fib6_sernum
[W <> Z, stale]
-> prev = xchg(rt6i_pcpu, NULL)
-> dst_release(prev)
[prev is pcpu_rt,
refcount 1->0, dead]
dst = skb_dst(skb)
[dst is the dead pcpu_rt]
dst_cache_set_ip6(dst)
-> dst_hold() on dead dst
-> WARN / use-after-free
For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without
PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release
the pcpu_rt. Shared nexthop objects provide such a path, as two routes
pointing to the same nhid share the same fib6_nh and its rt6i_pcpu
entry.
Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after
ip6_route_input() to force the NOREF dst into a refcounted one before
caching.
The output path is not affected as ip6_route_output() already returns a
refcounted dst. |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm2_read_public() calls tpm_buf_init() but fails to call
tpm_buf_destroy() on two exit paths, leaking a page allocation:
1. When name_size() returns an error (unrecognized hash algorithm),
the function returns directly without destroying the buffer.
2. On the success path, the buffer is never destroyed before
returning.
All other error paths in the function correctly call
tpm_buf_destroy() before returning.
Fix both by adding the missing tpm_buf_destroy() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: raise barrier before state machine transition
Move the barrier raise operation before calling llbitmap_state_machine()
in both llbitmap_start_write() and llbitmap_start_discard(). This
ensures the barrier is in place before any state transitions occur,
preventing potential race conditions where the state machine could
complete before the barrier is properly raised. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
