| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve id of register in sync_linked_regs()
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def. |
| IBM Operations Analytics - Log Analysis 1.3.5.0, 1.3.5.1, 1.3.5.2, 1.3.5.3, 1.3.6.0, 1.3.6.1, 1.3.7.0, 1.3.7.1, 1.3.7.2, and 1.3.8.0, 1.3.8.1, 1.3.8.2, 1.3.8.3, 1.3.8.4 IBM SmartCloud Analytics - Log Analysis does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. On top of that, the DELETE /upi/v1/upNodesLinks/{upNodeRef} handler unconditionally dereferences upNode.UPF after the type-guarded async release, even though AN-typed nodes are constructed without a UPF object. As a result, a single unauthenticated DELETE /upi/v1/upNodesLinks/gNB1 request crashes the handler with a nil-pointer panic AND mutates the in-memory user-plane topology before panicking (the UpNodeDelete(upNodeRef) line runs first). This is an unauthenticated, state-mutating panic-DoS sink that an off-path network attacker can trigger by name against any AN entry. This vulnerability is fixed in 4.2.2. |
| Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is started in REST API server mode (dalfox server), the server binds to 0.0.0.0:6664 by default and requires no API key unless the operator explicitly passes --api-key. Because model.Options — including FoundAction and FoundActionShell — is deserialized directly from attacker-supplied JSON in POST /scan, and because dalfox.Initialize explicitly propagates those two fields into the final scan options without stripping them, any unauthenticated caller who can reach the server port can supply an arbitrary shell command that the dalfox process will execute on the host whenever a scan finding is triggered. This vulnerability is fixed in 2.13.0. |
| Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, ParameterAnalysis in pkg/scanning/parameterAnalysis.go runs two sequential worker stages that both write to the same results channel. The channel is correctly closed after the first stage completes (close(results) at line 438), but the second stage — which processes POST-body parameters (dp) — is then launched with the same already-closed channel as its output. When a scanned parameter is reflected, processParams executes results <- paramResult on the closed channel, triggering a Go runtime panic that crashes the entire dalfox process. In server mode, the crash is remotely triggerable by any unauthenticated caller who can reach the REST API, because the default configuration has no API key and the second stage activates whenever options.Data != "" (i.e., the attacker supplies the data field) and the target reflects at least one parameter. This vulnerability is fixed in 2.13.0. |
| Missing Authorization vulnerability in Bizswoop Account Manager for WooCommerce allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects Account Manager for WooCommerce: from n/a through 2.1.2. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: goldfish: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down context entry
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix race condition during PASID entry replacement
The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing
an active PASID entry (e.g., during domain replacement), the current
implementation calculates a new entry on the stack and copies it to the
table using a single structure assignment.
struct pasid_entry *pte, new_pte;
pte = intel_pasid_get_entry(dev, pasid);
pasid_pte_config_first_level(iommu, &new_pte, ...);
*pte = new_pte;
Because the hardware may fetch the 512-bit PASID entry in multiple
128-bit chunks, updating the entire entry while it is active (Present
bit set) risks a "torn" read. In this scenario, the IOMMU hardware
could observe an inconsistent state — partially new data and partially
old data — leading to unpredictable behavior or spurious faults.
Fix this by removing the unsafe "replace" helpers and following the
"clear-then-update" flow, which ensures the Present bit is cleared and
the required invalidation handshake is completed before the new
configuration is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_ext_shift_extents()
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI) |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix memory leaks in gfs2_fill_super error path
Fix two memory leaks in the gfs2_fill_super() error handling path when
transitioning a filesystem to read-write mode fails.
First leak: kthread objects (thread_struct, task_struct, etc.)
When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the
created kernel threads (logd and quotad) are never destroyed. This
occurs because the fail_per_node label doesn't call
gfs2_destroy_threads().
Second leak: quota bitmap buffer (8192 bytes)
When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but
before other operations complete, the allocated quota bitmap is never
freed.
The fix moves thread cleanup to the fail_per_node label to handle all
error paths uniformly. gfs2_destroy_threads() is safe to call
unconditionally as it checks for NULL pointers. Quota cleanup is added
in gfs2_make_fs_rw() to properly handle the withdrawal case where
quota initialization succeeds but the filesystem is then withdrawn.
Thread leak backtrace (gfs2_freeze_lock_shared failure):
unreferenced object 0xffff88801d7bca80 (size 4480):
copy_process+0x3a1/0x4670 kernel/fork.c:2422
kernel_clone+0xf3/0x6e0 kernel/fork.c:2779
kthread_create_on_node+0x100/0x150 kernel/kthread.c:478
init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611
gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265
Quota leak backtrace (gfs2_make_fs_rw failure):
unreferenced object 0xffff88812de7c000 (size 8192):
gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409
gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149
gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in __unix_needs_revalidation
When receiving file descriptors via SCM_RIGHTS, both the socket pointer
and the socket's sk pointer can be NULL during socket setup or teardown,
causing NULL pointer dereferences in __unix_needs_revalidation().
This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new
__unix_needs_revalidation() function was added without proper NULL checks.
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0x0000000000000018
RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0)
Call Trace:
apparmor_file_receive+0x42/0x80
security_file_receive+0x2e/0x50
receive_fd+0x1d/0xf0
scm_detach_fds+0xad/0x1c0
The function dereferences sock->sk->sk_family without checking if either
sock or sock->sk is NULL first.
Add NULL checks for both sock and sock->sk before accessing sk_family. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Limit bpf program signature size
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc). |
| A vulnerability was found in omec-project amf up to 2.1.1. This vulnerability affects unknown code of the component NGReset Message Handler. Performing a manipulation results in memory corruption. The attack is possible to be carried out remotely. The exploit has been made public and could be used. It is recommended to apply a patch to fix this issue. |
| A security flaw has been discovered in SourceCodester Hospitals Patient Records Management System 1.0. Impacted is an unknown function of the file /admin/patients/view_history.php. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was detected in NousResearch hermes-agent up to 2026.4.16. The affected element is an unknown function of the component Slack Agent/Mattermost Agent. The manipulation of the argument format_message results in escaping of output. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
