Search

Search Results (354187 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-46131 1 Linux 1 Linux Kernel 2026-05-29 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: check for nEPT/nNPT in slow flush hypercalls Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa() is only valid if an L2 guest is running *with nested EPT/NPT enabled*. Instead use the same condition as translate_nested_gpa() itself.
CVE-2026-46132 1 Linux 1 Linux Kernel 2026-05-29 7.0 High
In the Linux kernel, the following vulnerability has been resolved: net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack without initialisation: struct ifla_vf_broadcast vf_broadcast; The struct contains a single fixed 32-byte field: /* include/uapi/linux/if_link.h */ struct ifla_vf_broadcast { __u8 broadcast[32]; }; The function then copies dev->broadcast into it using dev->addr_len as the length: memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len); On Ethernet devices (the overwhelming majority of SR-IOV NICs) dev->addr_len is 6, so only the first 6 bytes of broadcast[] are written. The remaining 26 bytes retain whatever was previously on the kernel stack. The full struct is then handed to userspace via: nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast) leaking up to 26 bytes of uninitialised kernel stack per VF per RTM_GETLINK request, repeatable. The other vf_* structs in the same function are explicitly zeroed for exactly this reason - see the memset() calls for ivi, vf_vlan_info, node_guid and port_guid a few lines above. vf_broadcast was simply missed when it was added. Reachability: any unprivileged local process can open AF_NETLINK / NETLINK_ROUTE without capabilities and send RTM_GETLINK with an IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per VF per request. Stack residue at this call site can include return addresses and transient sensitive data; KASAN with stack instrumentation, or KMSAN, will flag the nla_put() when reproduced. Zero the on-stack struct before the partial memcpy, matching the existing pattern used for the other vf_* structs in the same function.
CVE-2026-46137 1 Linux 1 Linux Kernel 2026-05-29 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer.
CVE-2026-46181 1 Linux 1 Linux Kernel 2026-05-29 7.0 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized.
CVE-2025-71304 1 Linux 1 Linux Kernel 2026-05-29 N/A
In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/ambient _ # cat /proc/$$/attr/smack/current _ # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms # echo foo >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms unknown option 86 # echo 4 >/smack/doi # echo 3 >/smack/doi !> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17 # echo 3 >/smack/doi !> [ 249.402261] smk_cipso_doi:678 remove rc = -2 !> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17 # ping -c1 10.1.95.12 !!> ping: 10.1.95.12: Address family for hostname not supported # echo _ >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms This happens because Smack keeps decommissioned DOIs, fails to re-add them, and consequently refuses to add the “default” domain map: # netlabelctl -p cipso list Configured CIPSO mappings (2) DOI value : 3 mapping type : PASS_THROUGH DOI value : 4 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (2) domain: "_" (IPv4) protocol: UNLABELED !> (no ipv4 map for default domain here) domain: DEFAULT (IPv6) protocol: UNLABELED Fix by clearing decommissioned DOI definitions and serializing concurrent DOI updates with a new lock. Also: - allow /smack/doi to live unconfigured, since adding a map (netlbl_cfg_cipsov4_map_add) may fail. CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI - add new DOI before removing the old default map, so the old map remains if the add fails (2008-02-04, Casey Schaufler)
CVE-2025-71305 1 Linux 1 Linux Kernel 2026-05-29 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/display/dp_mst: Add protection against 0 vcpi When releasing a timeslot there is a slight chance we may end up with the wrong payload mask due to overflow if the delayed_destroy_work ends up coming into play after a DP 2.1 monitor gets disconnected which causes vcpi to become 0 then we try to make the payload = ~BIT(vcpi - 1) which is a negative shift. VCPI id should never really be 0 hence skip changing the payload mask if VCPI is 0. Otherwise it leads to <7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc [drm_display_helper]] port ffff888126ce9000 (3) <4> [515.287267] -----------[ cut here ]----------- <3> [515.287268] UBSAN: shift-out-of-bounds in ../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36 <3> [515.287271] shift exponent -1 is negative <4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary) <4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER <4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 1645 03/15/2024 <4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work [drm_display_helper] <4> [515.287303] Call Trace: <4> [515.287304] <TASK> <4> [515.287306] dump_stack_lvl+0xc1/0xf0 <4> [515.287313] dump_stack+0x10/0x20 <4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0 <4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0 <4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d [drm_display_helper] <4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe] <4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0 <4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60 <4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe] <4> [515.287740] ? find_held_lock+0x31/0x90 <4> [515.287747] ? lock_release+0xce/0x2a0 <4> [515.287754] drm_atomic_check_only+0x6a2/0xb40 <4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140 <4> [515.287765] drm_atomic_commit+0x6e/0xf0 <4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10 <4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0 <4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0 <4> [515.287795] ? mutex_lock_nested+0x1b/0x30 <4> [515.287801] drm_client_modeset_commit+0x26/0x50 <4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110 <4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140 <4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0 <4> [515.287819] drm_client_hotplug+0x6c/0xf0 <4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0 <4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30 <4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410 [drm_display_helper] <4> [515.287861] process_one_work+0x22b/0x6f0 <4> [515.287874] worker_thread+0x1e8/0x3d0 <4> [515.287879] ? __pfx_worker_thread+0x10/0x10 <4> [515.287882] kthread+0x11c/0x250 <4> [515.287886] ? __pfx_kthread+0x10/0x10 <4> [515.287890] ret_from_fork+0x2d7/0x310 <4> [515.287894] ? __pfx_kthread+0x10/0x10 <4> [515.287897] ret_from_fork_asm+0x1a/0x30
CVE-2025-71307 1 Linux 1 Linux Kernel 2026-05-29 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug This patch removes the MCU halt and wait for halt procedures during panthor_fw_unplug() as the MCU can be in a variety of states or the FW may not even be loaded/initialized at all, the latter of which can lead to a NULL pointer dereference. It should be safe on unplug to just disable the MCU without waiting for it to halt as it may not be able to.
CVE-2025-71311 1 Linux 1 Linux Kernel 2026-05-29 N/A
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize new folios before use KMSAN reports an uninitialized value in longest_match_std(), invoked from ntfs_compress_write(). When new folios are allocated without being marked uptodate and ni_read_frame() is skipped because the caller expects the frame to be completely overwritten, some reserved folios may remain only partially filled, leaving the rest memory uninitialized.
CVE-2025-71312 1 Linux 1 Linux Kernel 2026-05-29 N/A
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super() In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without first freeing the memory it points to. This causes the subsequent call to ntfs_fs_free() to skip freeing the ntfs_mount_options structure. This results in a kmemleak report: unreferenced object 0xff1100015378b800 (size 32): comm "mount", pid 582, jiffies 4294890685 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................ backtrace (crc ed541d8c): __kmalloc_cache_noprof+0x424/0x5a0 __ntfs_init_fs_context+0x47/0x590 alloc_fs_context+0x5d8/0x960 __x64_sys_fsopen+0xb1/0x190 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This issue can be reproduced using the following commands: fallocate -l 100M test.file mount test.file /tmp/test Since sbi->options is duplicated from fc->fs_private and does not directly use the memory allocated for fs_private, it is unnecessary to set fc->fs_private to NULL. Additionally, this patch simplifies the code by utilizing the helper function put_mount_options() instead of open-coding the cleanup logic.
CVE-2026-9955 1 Google 1 Chrome 2026-05-29 N/A
Inappropriate implementation in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High)
CVE-2026-46176 1 Linux 1 Linux Kernel 2026-05-29 7.0 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path.
CVE-2026-9097 1 Casdoor 1 Casdoor 2026-05-29 N/A
Casdoor versions 2.362.0 and earlier do not verify that a JWT used for token exchange is still active. The GetTokenExchangeToken() function in object/token_oauth.go validates the JWT signature and parses its claims, but never queries the Token table to verify whether the subject token has been revoked or invalidated. Because the revocation check is entirely absent, administrators are unable to terminate active sessions or revoke compromised tokens.
CVE-2026-45410 1 Mauriceboe 1 Trek 2026-05-29 5.3 Medium
TREK is a collaborative travel planner. Prior to 3.0.18, early return on missing user during login flow allowed an attacker to enumerate valid user accounts via response timing discrepancy. When an email address existed in the database, the backend performed a bcrypt password comparison before returning a 401 Unauthorized, adding ~370 ms of latency. When the email did not exist, the backend returned immediately (~10 ms). This ~14× timing difference could be detected without any difference in HTTP status codes or response bodies. This vulnerability is fixed in 3.0.18.
CVE-2026-45023 1 Significant-gravitas 1 Autogpt 2026-05-29 5.4 Medium
AutoGPT is a workflow automation platform for creating, deploying, and managing continuous artificial intelligence agents. Prior to 0.6.59, POST /api/blocks/{block_id}/execute endpoint executes blocks without consuming any credits, regardless of the user's balance. The credit check that exists in the graph execution path (manager.py) is never reached when blocks are called directly via the external API, allowing unlimited free execution of all blocks. This vulnerability is fixed in 0.6.59.
CVE-2026-45364 1 Better-auth 1 Better Auth 2026-05-29 7.3 High
Better Auth is an authentication and authorization library for TypeScript. Prior to 1.4.17 and 1.5.0-beta.9, Better Auth's HTTP rate limiter keyed each request by the exact textual IP address it received in x-forwarded-for (or the configured IP-bearing header). IPv6 clients controlling a typical /64 allocation could rotate through 2^64 distinct source addresses without exhausting the per-address counter, defeating rate limiting on /sign-in/email, /sign-up/email, /forget-password, and every other path the limiter protects. The same bug allowed a single client to vary the textual encoding of one IPv6 address (uppercase, compression, IPv4-mapped, hex-encoded IPv4-in-IPv6) and produce multiple distinct keys. This vulnerability is fixed in 1.4.17 and 1.5.0-beta.9.
CVE-2026-49299 1 Openstack 1 Neutron 2026-05-29 N/A
In OpenStack Neutron before 28.0.1, the tagging controller enforces plural policy action names on single-tag write operations while the defined policy rules use singular names. The mismatched names evaluate as allowed under the default policy, permitting a project reader to create and update tags on same-project resources. Deployments running Neutron 26.0.0 or later are affected.
CVE-2026-9971 1 Google 1 Chrome 2026-05-29 N/A
Inappropriate implementation in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: High)
CVE-2026-9950 1 Google 1 Chrome 2026-05-29 N/A
Insufficient validation of untrusted input in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to bypass same origin policy via a crafted HTML page. (Chromium security severity: High)
CVE-2026-5343 1 Drupal 1 Saml Sso - Service Provider 2026-05-29 N/A
Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal SAML SSO - Service Provider allows Privilege Escalation. This issue affects SAML SSO - Service Provider: from 0.0.0 before 3.1.4.
CVE-2026-6892 2026-05-29 5 Medium
Improper handling of symbolic links in the installer of CUPS Printer Driver for macOS(*) may allow a local attacker with login privileges to exploit a specially crafted symbolic link during installation to modify permissions of directories for which they would not normally have authorization.  *:Canon PIXUS iX6800 Series CUPS Printer Driver for macOS Version 16.91.0.0 or earlier (Japan) Canon PIXMA MG2500 Series and iX6800 Series CUPS Printer Driver for macOS Version 16.91.0.0 or earlier (US and Europe)