| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: release descriptor pools on probe failure
The per-NUMA-node descriptor DMA pools are created lazily from
nvme_init_hctx_common() once the admin tag set is allocated, but they are
only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any
probe failure after the admin tag set has been allocated unwinds through
the out_disable label and nvme_pci_free_ctrl(), neither of which releases
the pools, leaking the dma_pool objects.
Release the descriptor pools in the out_disable error path. It must not
be added to nvme_pci_free_ctrl(), as that would double-free against
nvme_remove() on the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: hold a reference to the request skb during send_frame
__pn533_send_async() publishes the command and then calls
dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame
can be matched to this command: the I2C threaded IRQ runs
pn533_recv_frame(), which queues cmd_complete_work, and
pn533_send_async_complete() frees cmd->req with consume_skb().
On the I2C transport, pn533_i2c_send_frame() still dereferences the same
skb after i2c_master_send() returns, so a completion that races the
send can free the skb while the transport is still using it.
The request skb is owned by the command object and may be freed by
command completion at any time after dev->cmd is published, so the
transport send path must not assume it stays alive. Hold a temporary
reference to the request skb across the send_frame() call so the
transport always sees a live skb even if completion races the send.
Add a pn533_send_cmd_frame() helper and use it from all three send
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
This bug was discovered while testing the hns3 driver under channel
reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on
arm64. The race is intermittently triggered when page_pool_destroy()
runs page_pool_scrub() concurrently with page return via
page_pool_put_netmem() on a different CPU. A WARN in
page_pool_clear_pp_info() surfaced the dangling DMA index bits left
by the cmpxchg loser, which led to the investigation.
page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no
page ref held. __page_pool_release_netmem_dma() currently reads and
writes netmem fields (dma_addr, DMA index bits in pp_magic) after
xa_cmpxchg() returns. The unref path calls put_page() unconditionally
regardless of the cmpxchg outcome; when it loses the cmpxchg, it still
frees the page before the scrub winner finishes these netmem accesses,
so scrub touches a freed page -- a Use-After-Free.
Fix this by splitting the DMA release into two functions:
1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(),
does the cmpxchg to remove the DMA mapping, and calls dma_unmap on
the cached address. It never touches netmem fields after the cmpxchg,
making it safe for the scrub path which holds no page ref.
2. __page_pool_release_netmem_dma() wraps the above and additionally
clears dma_addr and DMA index bits in netmem fields. This is safe
only when the caller holds a page ref, so it is used by the return
path (page_pool_return_netmem).
The scrub path calls __page_pool_unmap_netmem_dma() directly; the return
path calls __page_pool_release_netmem_dma(). |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute stores with the lock
The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes
(submit_queues, poll_queues) get dev->NAME written again after apply_fn
returns, outside its lock; APPLY=NULL attributes are entirely lockless.
configfs only serializes stores per-open-file, so concurrent stores on
separate fds race.
For apply_fn attributes, once one store's apply_fn has reconfigured the
hardware, a second (losing) store can still overwrite dev->NAME
afterwards. This leaves dev->submit_queues out of sync with the live
queue count, which is later caught by the WARN_ON_ONCE() in
null_map_queues().
For !apply_fn attributes, power_store()'s null_add_dev() validates and
builds the device under "lock" but only sets CONFIGURED afterwards. A store
slipping in during this window can change a field mid-setup -- for example,
zone_nr_conv can be pushed above nr_zones after it has already been
clamped, leading to an out-of-bounds dev->zones[] access.
Take "lock" in the macro around the apply_fn call, the CONFIGURED test and
the field write, and move it out of nullb_apply_submit_queues()/
nullb_apply_poll_queues() so both paths are covered once. This serializes
stores with power_store's setup and with each other. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: avoid teardown retry loop on xarray allocation failure
__ublk_shmem_remove_ranges() removes matching maple tree ranges in
batches, but first stores each range into a temporary xarray so that the
pages can be unpinned after dropping the maple tree lock.
That temporary xarray is filled under the maple tree lock with
xa_store(..., GFP_ATOMIC). If the store fails before mas_erase(), the
current range is left in the tree and the helper returns false. The
outer ublk_shmem_remove_ranges() loop then immediately retries the same
range. While the atomic allocation keeps failing, the teardown path has
no forward progress.
The issue can be reproduced with radix_tree_node failslab injection after
a SHMEM_ZC buffer has already been registered:
# Kernel config:
# CONFIG_BLK_DEV_UBLK=y
# CONFIG_DEBUG_FS=y
# CONFIG_FAULT_INJECTION=y
# CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAILSLAB=y
echo 10 > /proc/sys/vm/nr_hugepages
mkdir -p /tmp/htlb
mount -t hugetlbfs none /tmp/htlb
fallocate -l 4M /tmp/htlb/ublk_buf
dev_id=$(kublk add -t null --shmem_zc \
--htlb /tmp/htlb/ublk_buf |
awk -F '[ :]' '/dev id/ {print $3}')
echo 1 > /sys/kernel/slab/radix_tree_node/failslab
echo Y > /sys/kernel/debug/failslab/cache-filter
echo Y > /sys/kernel/debug/failslab/ignore-gfp-wait
echo 1 > /sys/kernel/debug/failslab/interval
echo -1 > /sys/kernel/debug/failslab/times
echo 100 > /sys/kernel/debug/failslab/probability
kublk del -n "$dev_id"
On the unfixed kernel the delete command was still running after 3
seconds. Disabling failslab made it return. The fault-injection stack
showed:
should_failslab
kmem_cache_alloc_lru_noprof
__xas_nomem
__xa_store
xa_store
__ublk_shmem_remove_ranges
ublk_cdev_rel
ublk_ctrl_del_dev
Remove the allocation from the teardown loop. Keep the existing batch
limit, but collect {base_pfn, nr_pages} pairs in a fixed-size stack array.
Once a matching range is found, the range is erased from the maple tree
before dropping the lock, so each successful scan makes progress without
depending on any GFP_ATOMIC allocation.
With the same failslab settings, the fixed kernel completed
"kublk del -n $dev_id" successfully in about 45 ms. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix leak of ksmbd_ipc_login_request_ext() returned buffer
Free it unconditionally after ksmbd_alloc_user() calls.
kmemleak splat:
unreferenced object 0xffff888103b83540 (size 192):
comm "pool-0", pid 16970, jiffies 4377290937
hex dump (first 32 bytes):
00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 408ccc66):
__kvmalloc_node_noprof+0x730/0x920
handle_generic_event+0xec/0x1a0 [ksmbd]
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x181/0x290
netlink_rcv_skb+0x4f/0x100
genl_rcv+0x28/0x40
netlink_unicast+0x1e6/0x2c0
netlink_sendmsg+0x20a/0x450
____sys_sendmsg+0x2e8/0x310
___sys_sendmsg+0x78/0xc0
__sys_sendmsg+0x63/0xc0
do_syscall_64+0xa1/0x670
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: free preauth sessions on connection teardown
SMB3.1.1 multichannel binding preserves the preauthentication hash in a
preauth_session between the NTLM negotiate and authenticate requests.
The binding NTLM negotiate allocates this object and returns
STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends
the authenticate request, neither the authenticate nor error cleanup paths
free the object.
Release any remaining preauthentication sessions when tearing down the
connection. Initialize the list when allocating the connection so that this
cleanup is safe regardless of the negotiated dialect. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger()
See the procedure below:
ksmbd_launch_ksmbd_durable_scavenger
durable_scavenger_running = true
server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR()
server_ctrl_handle_reset
ksmbd_stop_durable_scavenger
kthread_stop(server_conf.dh_task) // invalid pointer |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks
_bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for
full sockets, so these helpers expect the socket lock to be held.
BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF
programs without acquiring the socket lock. A program attached to
either hook can therefore trigger the sock_owned_by_me() warning by
calling bpf_setsockopt() or bpf_getsockopt().
Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME
and CGROUP_UNIX_GETSOCKNAME. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely discard unregistered deferred locks
When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on
rollback_list before allocating and registering the asynchronous work.
If either operation fails, rollback assumes that smb_lock->conn is
initialized and dereferences NULL. The deferred file_lock also remains
linked into the VFS blocked-lock state while it is freed.
Keep the lock off rollback_list until async setup succeeds. On setup
failures, explicitly unblock and wake the deferred lock before freeing it
and its ksmbd wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope session state changes to bound connections
ksmbd_all_conn_set_status() treats every connection whose transient
binding flag is set as belonging to the target SessionId. A logoff or
session replacement can consequently move an unrelated connection to
NEED_RECONNECT or NEED_SETUP.
Pass the target session itself and select connections using either the
connection-local session xarray or the session's permanent channel list.
Use the same association test while waiting for requests to drain.
Serialize session-wide status changes under request_lock and do not
overwrite EXITING or RELEASING. Protect the shutdown transition with the
same lock so a concurrent session update cannot revive a closing
connection. |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/blocklayout: Fix device leaks on parse failure
bl_parse_concat() and bl_parse_stripe() allocate a child device array and
then parse each child in turn. If parsing a child fails, the failed child is
not counted in nr_children and the parent may be left with a children array
that bl_free_device() will not release when nr_children is zero.
Release the failed child and the already parsed children before returning the
error. Also make bl_free_device() release the child array whenever the
children pointer is set, so that partially initialised concat or stripe
devices are cleaned up correctly.
bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the
file reference. Clear the pointer after fput() so that an outer cleanup path
does not put it again. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
devm_clk_get_optional_enabled_with_rate() registers its cleanup action
before setting the clock rate. If setting the rate fails, it attempts to
disable and unprepare a clock that was never enabled. This issue was
spotted while reviewing "rust: clk: add devres-managed clks" [1].
Register the cleanup action only after successfully preparing and enabling
the clock.
[1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com |
| In the Linux kernel, the following vulnerability has been resolved:
cuse: wait for pending RCU callbacks on module exit
Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"),
fuse_conn_put() frees the fuse_conn through call_rcu() rather than
synchronously. For cuse, fc->release is cuse_fc_release(), which
lives in the cuse module. If the module is removed before the RCU
grace period ends, the callback jumps into freed module memory:
userspace / module unload | RCU softirq
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
close(/dev/cuse) |
cuse_channel_release() |
fuse_dev_release() |
fuse_conn_put(fch->conn) |
call_rcu(delayed_release) ------+---> callback queued
|
rmmod cuse |
cuse_exit() |
cuse_channel_destroy() |
... |
return |
|
<module text freed> |
| rcu_do_batch()
| delayed_release()
| fc->release()
| -> cuse_fc_release()
| ^^^ freed text!
The freed module text is unmapped by vfree(), so the jump into the
stale callback triggers a page-fault Oops. If the virtual address
is subsequently reused, the callback could execute unrelated code
(undefined behaviour).
Fix this by calling rcu_barrier() in cuse_exit() so that any pending
fuse_conn release callback completes before the module is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: check for NULL root inode in fuse_fill_super_submount
fuse_iget() can return NULL when its inode allocation fails, but
fuse_fill_super_submount() passed the result straight to get_fuse_inode()
and decremented fi->nlookup without checking it:
root = fuse_iget(sb, parent_fi->nodeid, ...);
fi = get_fuse_inode(root);
fi->nlookup--;
Inside fuse_iget() the inode allocation can fail and return NULL. The
submount root takes the iget5_locked() path, whose alloc_inode() can fail
under memory pressure (the auto-submount branch can fail the same way in
new_inode() or fuse_alloc_submount_lookup()):
inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set,
&nodeid);
if (!inode)
return NULL;
A NULL root makes get_fuse_inode() a container_of() on NULL and the
nlookup decrement a write to a bogus address, oopsing the mount. With
CONFIG_KASAN the following null pointer dereference is reported when the
root inode allocation of an auto-submount fails (e.g. under memory
pressure):
==================================================================
BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0
Read of size 8 at addr 00000000000002b0 by task ls/942
CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15
Call Trace:
<TASK>
fuse_get_tree_submount+0x656/0x8b0
vfs_get_tree+0x48/0x140
fc_mount+0x13/0x50
fuse_dentry_automount+0x7a/0xb0
__traverse_mounts+0xca/0x330
step_into+0x339/0xac0
path_lookupat+0xc5/0x2f0
filename_lookup+0x163/0x2a0
vfs_statx+0xd5/0x200
do_statx+0x83/0xd0
__x64_sys_statx+0xa0/0xc0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x78/0xe2
</TASK>
==================================================================
Return -ENOMEM instead; the caller tears down the partially built
superblock on error, matching the other error returns in this
function. |
