| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Windows MSHTML Platform Remote Code Execution Vulnerability |
| Scripting Engine Memory Corruption Vulnerability |
| Microsoft Dynamics 365 On-Premises Remote Code Execution Vulnerability |
| Azure CycleCloud Elevation of Privilege Vulnerability |
| Microsoft Office Remote Code Execution Vulnerability |
| A vulnerability was found in Pimzino spec-workflow-mcp up to 2.2.6. This issue affects the function ApprovalStorage.createApproval of the file src/tools/approvals.ts. Performing a manipulation of the argument categoryName results in path traversal. The attack is only possible with local access. Upgrading to version 2.2.7 is capable of addressing this issue. The patch is named 9c7a7839e690bb4543f0e7481b5740d23808e5fe. It is advisable to upgrade the affected component. |
| A vulnerability was identified in bazylhorsey obsidian-mcp-server 1.0.0. This affects the function readCanvas/writeCanvas of the file src/services/CanvasService.ts. Such manipulation leads to path traversal. An attack has to be approached locally. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in Jevon-Zhong Ai-doctor 0.0.1. This vulnerability affects the function deleteImage of the file ai-doctor-server/src/filemanagement/filemanagement.service.ts. Performing a manipulation of the argument imagePath results in path traversal. The attack must be initiated from a local position. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix check in amdgpu_hmm_invalidate_gfx
For a short moment during alloc/free the userptr BO is not part of his VM,
so bo->vm_bo can be NULL.
Keep a reference to the VM root PD as parent of the userptr BO so that
we can always use that to wait for all submissions of the VM instead of
only the one involving the userptr BO.
(cherry picked from commit 631849ff5d603841e74f19f4a5e30fe1f7d7cf30) |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formSmsManage interface. A remote attacker can inject arbitrary malicious commands into the action_value field, resulting in command execution with root privileges. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formLtefotaUpgradeFibocom interface. A remote attacker can inject arbitrary malicious commands into the fota_url field, resulting in command execution with root privileges. |
| A flaw has been found in abrinsmead mindpilot-mcp 0.5.0. Affected by this issue is some unknown functionality of the component HistoryService. This manipulation of the argument ID causes path traversal. The attack needs to be launched locally. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in MIMICLab mcp-pdf-vision 1.1.0. The impacted element is the function load_pdf of the file src/index.ts. Such manipulation of the argument pdfPath/sessionId leads to command injection. The attack can only be performed from a local environment. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function MmsMapping_varAccessSpecToObjectReference of the file src/iec61850/common/iec61850_common.c of the component MMS Protocol Workflow. Such manipulation of the argument GetNamedVariableListAttributesResponse.itemId leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Preserve rq tracking across local DSQ dispatch
dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while
ops.dispatch() has recorded the current rq. Moving a task to a local DSQ
may switch to the source or destination rq before synchronously invoking
ops.dequeue() through the following path:
SCX_CALL_OP(dispatch, rq)
ops.dispatch()
scx_bpf_dsq_move_to_local()
scx_flush_dispatch_buf()
finish_dispatch()
dispatch_to_local_dsq()
scx_dispatch_enqueue()
local_dsq_post_enq()
call_task_dequeue()
SCX_CALL_OP_TASK(dequeue, locked_rq, ...)
The nested callback saves the recorded rq and restores it on return. If
the rq tracking does not follow the lock switch, update_locked_rq() can
trigger the following lockdep assertion while restoring an rq which is
no longer held:
WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170
Call Trace:
scx_dispatch_enqueue+0x2b0/0x460
dispatch_to_local_dsq+0x138/0x230
scx_flush_dispatch_buf+0x1af/0x220
scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0
bpf__sched_ext_ops_dispatch+0x4b/0xa7
do_pick_task_scx+0x3b6/0x910
__pick_next_task+0x105/0x1f0
__schedule+0x3e7/0x1980
Introduce switch_rq_lock() to update the tracking state together with
each rq lock handoff. Use it in dispatch_to_local_dsq(),
move_remote_task_to_local_dsq() and the in-balance paths of
scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the
rq whose lock is actually held throughout the lock dance. |
| If `shutil.unpack_archive()` is given a ZIP archive with an absolute Windows path containing a drive (`C:\\...`) then the archive will be extracted outside the target directory which is different than other operating systems. Only Windows is affected by this vulnerability. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Versions 1.7.14 through 1.7.17 are vulnerable to a nil-pointer panic triggered by a protobuf Transaction whose embedded RawData sub-message is omitted. This omission causes RawData to decode to nil. Every transaction gossiped on the Klever-Go P2P network is decoded and validated synchronously inside the libp2p pubsub topic-validator callback, where txVersionChecker.CheckTxVersion dereferences tx.RawData.Version with no nil check. Because the libp2p pubsub callback, the underlying go-libp2p-pubsub validation worker, and Klever's own network/p2p layer install no recover(), the panic propagates and crashes the entire node process. The attacker payload is a 3-byte protobuf message; no validator key, stake, funds, or on-chain account is required, and delivery aimed at enough of the BLS validator set can halt block production, resulting in a chain halt. This issue has been fixed in version 1.7.18. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix race between registration and connection abortion
This fixes this race:
- thread a: io_uring_enter -> register sqe ->
fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref
yet
- thread b: fuse_conn_destroy() -> fuse_chan_abort() ->
fuse_uring_abort() is a no-op due to queue ref being 0
- thread a: grabs the queue_ref, queue_ref is now 1, rest of
fuse_uring_do_register() logic executes
- thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs
and calls
"wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);"
The abort/unmount thread will hang indefinitely in unkillable state as
nothing will decrement queue_refs or wake stop_waitq, and the ring,
queue, and ent are leaked.
Fix this by checking fch->connected under fch->lock after the created
ent has grabbed a ref count on the queue. This ensures that in the
scenario above, it is guaranteed that we either release the queue ref
and wake up stop_waitq (in case fuse_chan_wait_aborted() is already
waiting) in fuse_uring_do_register() when we detect !fch->connected, or
if the connection is aborted after the check, it is guaranteed that the
async teardown worker will be running in the background cleaning up ents
and decrementing the ent's ref on the queue, which will unblock the
eventual queue and ring teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c). |
