| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When setting up interrupt remapping for legacy PCI(-X) devices,
including PCI(-X) bridges, a lookup of the upstream bridge is required.
This lookup, itself involving acquiring of a lock, is done in a context
where acquiring that lock is unsafe. This can lead to a deadlock. |
| Cal.com is open-source scheduling software. From 3.1.6 to before 6.0.7, there is a vulnerability in a custom NextAuth JWT callback that allows attackers to gain full authenticated access to any user's account by supplying a target email address via session.update(). This vulnerability is fixed in 6.0.7. |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Vivotek Affected device model numbers are FD8365, FD8365v2, FD9165, FD9171, FD9187, FD9189, FD9365, FD9371, FD9381, FD9387, FD9389, FD9391,FE9180,FE9181, FE9191, FE9381, FE9382, FE9391, FE9582, IB9365, IB93587LPR, IB9371,IB9381, IB9387, IB9389, IB939,IP9165,IP9171, IP9172, IP9181, IP9191, IT9389, MA9321, MA9322, MS9321, MS9390, TB9330 (Firmware modules) allows OS Command Injection.This issue affects Affected device model numbers are FD8365, FD8365v2, FD9165, FD9171, FD9187, FD9189, FD9365, FD9371, FD9381, FD9387, FD9389, FD9391,FE9180,FE9181, FE9191, FE9381, FE9382, FE9391, FE9582, IB9365, IB93587LPR, IB9371,IB9381, IB9387, IB9389, IB939,IP9165,IP9171, IP9172, IP9181, IP9191, IT9389, MA9321, MA9322, MS9321, MS9390, TB9330: 0100a, 0106a, 0106b, 0107a, 0107b_1, 0109a, 0112a, 0113a, 0113d, 0117b, 0119e, 0120b, 0121, 0121d, 0121d_48573_1, 0122e, 0124d_48573_1, 012501, 012502, 0125c. |
| CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, CryptoLib’s KMC crypto service integration is vulnerable to a heap buffer overflow when decoding Base64-encoded ciphertext/cleartext fields returned by the KMC service. The decode destination buffer is sized using an expected output length (len_data_out), but the Base64 decoder writes output based on the actual Base64 input length and does not enforce any destination size limit. An oversized Base64 string in the KMC JSON response can cause out-of-bounds writes on the heap, resulting in process crash and potentially code execution under certain conditions. This issue has been patched in version 1.4.3. |
| Fickling is a Python pickling decompiler and static analyzer. Fickling versions up to and including 0.1.6 do not treat Python's cProfile module as unsafe. Because of this, a malicious pickle that uses cProfile.run() is classified as SUSPICIOUS instead of OVERTLY_MALICIOUS. If a user relies on Fickling's output to decide whether a pickle is safe to deserialize, this misclassification can lead them to execute attacker-controlled code on their system. This affects any workflow or product that uses Fickling as a security gate for pickle deserialization. This issue has been patched in version 0.1.7. |
| CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the libcurl write_callback function in the KMC crypto service client allows unbounded memory growth by reallocating response buffers without any size limit or overflow check. A malicious KMC server can return arbitrarily large HTTP responses, forcing the client to allocate excessive memory until the process is terminated by the OS. This issue has been patched in version 1.4.3. |
| NSecsoft 'NSecKrnl' is a Windows driver that allows a local, authenticated attacker to terminate processes owned by other users, including SYSTEM and Protected Processes by issuing crafted IOCTL requests to the driver. |
| Open Source Point of Sale (opensourcepos) is a web based point of sale application written in PHP using CodeIgniter framework. opensourcepos 3.4.0 and 3.4.1 has a stored XSS vulnerability exists in the Configuration (Information) functionality. An authenticated user with the permission “Configuration: Change OSPOS's Configuration” can inject a malicious JavaScript payload into the Company Name field when updating Information in Configuration. The malicious payload is stored and later triggered when a user accesses /sales/complete. First select Sales, and choose New Item to create an item, then click on Completed . Due to insufficient input validation and output encoding, the payload is rendered and executed in the user’s browser, resulting in a stored XSS vulnerability. This vulnerability is fixed in 3.4.2. |
| Insertion of Sensitive Information Into Sent Data vulnerability in Vito Peleg Atarim atarim-visual-collaboration allows Retrieve Embedded Sensitive Data.This issue affects Atarim: from n/a through <= 4.2. |
| A flaw was found in libssh when using the ChaCha20 cipher with the OpenSSL library. If an attacker manages to exhaust the heap space, this error is not detected and may lead to libssh using a partially initialized cipher context. This occurs because the OpenSSL error code returned aliases with the SSH_OK code, resulting in libssh not properly detecting the error returned by the OpenSSL library. This issue can lead to undefined behavior, including compromised data confidentiality and integrity or crashes. |
| The Dyson MQTT server (2022 and possibly later) allows publications and subscriptions by a client that has the correct values of AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, AWS_SESSION_TOKEN, and device serial number, even if a device (such as a Pure Hot+Cool device) has been removed and is not visible in the supported MyDyson app. This could allow an unexpected actor to obtain control and set the room temperature (up to 37 Celsius) if ownership of the device is transferred without wiping the device. NOTE: the Supplier's position is that this is a potential vulnerability that dates back 4 years ago in 2022 and "we are unable to replicate that anymore." Based on the submitted report, in order to leverage this issue, an attacker needs to own a Dyson device with full privileges, sniff for the AWS credentials, and then transfer ownership of that Dyson device to the victim. Even if these steps were successfully accomplished, the attacker only acquires the ability to configure the Dyson device within its safe operating range, and does not acquire the ability to execute code on the device or obtain sensitive information. |
| Certain instructions need intercepting and emulating by Xen. In some
cases Xen emulates the instruction by replaying it, using an executable
stub. Some instructions may raise an exception, which is supposed to be
handled gracefully. Certain replayed instructions have additional logic
to set up and recover the changes to the arithmetic flags.
For replayed instructions where the flags recovery logic is used, the
metadata for exception handling was incorrect, preventing Xen from
handling the the exception gracefully, treating it as fatal instead. |
| Cowrie versions prior to 2.9.0 contain a server-side request forgery (SSRF) vulnerability in the emulated shell implementation of wget and curl. In the default emulated shell configuration, these command emulations perform real outbound HTTP requests to attacker-supplied destinations. Because no outbound request rate limiting was enforced, unauthenticated remote attackers could repeatedly invoke these commands to generate unbounded HTTP traffic toward arbitrary third-party targets, allowing the Cowrie honeypot to be abused as a denial-of-service amplification node and masking the attacker’s true source address behind the honeypot’s IP. |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.
A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. |
| A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in UTT 进取 520W 1.7.7-180627. Affected is the function strcpy of the file /goform/APSecurity. Executing a manipulation of the argument wepkey1 can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this vulnerability is the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
