| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix peer HE MCS assignment
In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to
firmware as receive MCS while peer's receive MCS sent as transmit MCS,
which goes against firmwire's definition.
While connecting to a misbehaved AP that advertises 0xffff (meaning not
supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff
is assigned to he_mcs->rx_mcs_set field.
Ext Tag: HE Capabilities
[...]
Supported HE-MCS and NSS Set
[...]
Rx and Tx MCS Maps 160 MHz
[...]
Tx HE-MCS Map 160 MHz: 0xffff
Swap the assignment to fix this issue.
As the HE rate control mask is meant to limit our own transmit MCS, it
needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive MCS.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix null deref on srq->rq.queue after resize failure
A NULL pointer dereference can occur in rxe_srq_chk_attr() when
ibv_modify_srq() is invoked twice in succession under certain error
conditions. The first call may fail in rxe_queue_resize(), which leads
rxe_srq_from_attr() to set srq->rq.queue = NULL. The second call then
triggers a crash (null deref) when accessing
srq->rq.queue->buf->index_mask.
Call Trace:
<TASK>
rxe_modify_srq+0x170/0x480 [rdma_rxe]
? __pfx_rxe_modify_srq+0x10/0x10 [rdma_rxe]
? uverbs_try_lock_object+0x4f/0xa0 [ib_uverbs]
? rdma_lookup_get_uobject+0x1f0/0x380 [ib_uverbs]
ib_uverbs_modify_srq+0x204/0x290 [ib_uverbs]
? __pfx_ib_uverbs_modify_srq+0x10/0x10 [ib_uverbs]
? tryinc_node_nr_active+0xe6/0x150
? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2c0/0x470 [ib_uverbs]
? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]
? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs]
ib_uverbs_run_method+0x55a/0x6e0 [ib_uverbs]
? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]
ib_uverbs_cmd_verbs+0x54d/0x800 [ib_uverbs]
? __pfx_ib_uverbs_cmd_verbs+0x10/0x10 [ib_uverbs]
? __pfx___raw_spin_lock_irqsave+0x10/0x10
? __pfx_do_vfs_ioctl+0x10/0x10
? ioctl_has_perm.constprop.0.isra.0+0x2c7/0x4c0
? __pfx_ioctl_has_perm.constprop.0.isra.0+0x10/0x10
ib_uverbs_ioctl+0x13e/0x220 [ib_uverbs]
? __pfx_ib_uverbs_ioctl+0x10/0x10 [ib_uverbs]
__x64_sys_ioctl+0x138/0x1c0
do_syscall_64+0x82/0x250
? fdget_pos+0x58/0x4c0
? ksys_write+0xf3/0x1c0
? __pfx_ksys_write+0x10/0x10
? do_syscall_64+0xc8/0x250
? __pfx_vm_mmap_pgoff+0x10/0x10
? fget+0x173/0x230
? fput+0x2a/0x80
? ksys_mmap_pgoff+0x224/0x4c0
? do_syscall_64+0xc8/0x250
? do_user_addr_fault+0x37b/0xfe0
? clear_bhb_loop+0x50/0xa0
? clear_bhb_loop+0x50/0xa0
? clear_bhb_loop+0x50/0xa0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: defer config put in recv_work
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Fix device resources accessed after device removal
Correct possible race conditions during device removal.
Previously, a scheduled work item to reset a LUN could still execute
after the device was removed, leading to use-after-free and other
resource access issues.
This race condition occurs because the abort handler may schedule a LUN
reset concurrently with device removal via sdev_destroy(), leading to
use-after-free and improper access to freed resources.
- Check in the device reset handler if the device is still present in
the controller's SCSI device list before running; if not, the reset
is skipped.
- Cancel any pending TMF work that has not started in sdev_destroy().
- Ensure device freeing in sdev_destroy() is done while holding the
LUN reset mutex to avoid races with ongoing resets. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: init run lock for extend inode
After setting the inode mode of $Extend to a regular file, executing the
truncate system call will enter the do_truncate() routine, causing the
run_lock uninitialized error reported by syzbot.
Prior to patch 4e8011ffec79, if the inode mode of $Extend was not set to
a regular file, the do_truncate() routine would not be entered.
Add the run_lock initialization when loading $Extend.
syzbot reported:
INFO: trying to register non-static key.
Call Trace:
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
assign_lock_key+0x133/0x150 kernel/locking/lockdep.c:984
register_lock_class+0x105/0x320 kernel/locking/lockdep.c:1299
__lock_acquire+0x99/0xd20 kernel/locking/lockdep.c:5112
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_write+0x96/0x1f0 kernel/locking/rwsem.c:1590
ntfs_set_size+0x140/0x200 fs/ntfs3/inode.c:860
ntfs_extend+0x1d9/0x970 fs/ntfs3/file.c:387
ntfs_setattr+0x2e8/0xbe0 fs/ntfs3/file.c:808 |
| In the Linux kernel, the following vulnerability has been resolved:
macintosh/mac_hid: fix race condition in mac_hid_toggle_emumouse
The following warning appears when running syzkaller, and this issue also
exists in the mainline code.
------------[ cut here ]------------
list_add double add: new=ffffffffa57eee28, prev=ffffffffa57eee28, next=ffffffffa5e63100.
WARNING: CPU: 0 PID: 1491 at lib/list_debug.c:35 __list_add_valid_or_report+0xf7/0x130
Modules linked in:
CPU: 0 PID: 1491 Comm: syz.1.28 Not tainted 6.6.0+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__list_add_valid_or_report+0xf7/0x130
RSP: 0018:ff1100010dfb7b78 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffa57eee18 RCX: ffffffff97fc9817
RDX: 0000000000040000 RSI: ffa0000002383000 RDI: 0000000000000001
RBP: ffffffffa57eee28 R08: 0000000000000001 R09: ffe21c0021bf6f2c
R10: 0000000000000001 R11: 6464615f7473696c R12: ffffffffa5e63100
R13: ffffffffa57eee28 R14: ffffffffa57eee28 R15: ff1100010dfb7d48
FS: 00007fb14398b640(0000) GS:ff11000119600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010d096005 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 80000000
Call Trace:
<TASK>
input_register_handler+0xb3/0x210
mac_hid_start_emulation+0x1c5/0x290
mac_hid_toggle_emumouse+0x20a/0x240
proc_sys_call_handler+0x4c2/0x6e0
new_sync_write+0x1b1/0x2d0
vfs_write+0x709/0x950
ksys_write+0x12a/0x250
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The WARNING occurs when two processes concurrently write to the mac-hid
emulation sysctl, causing a race condition in mac_hid_toggle_emumouse().
Both processes read old_val=0, then both try to register the input handler,
leading to a double list_add of the same handler.
CPU0 CPU1
------------------------- -------------------------
vfs_write() //write 1 vfs_write() //write 1
proc_sys_write() proc_sys_write()
mac_hid_toggle_emumouse() mac_hid_toggle_emumouse()
old_val = *valp // old_val=0
old_val = *valp // old_val=0
mutex_lock_killable()
proc_dointvec() // *valp=1
mac_hid_start_emulation()
input_register_handler()
mutex_unlock()
mutex_lock_killable()
proc_dointvec()
mac_hid_start_emulation()
input_register_handler() //Trigger Warning
mutex_unlock()
Fix this by moving the old_val read inside the mutex lock region. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: defer config unlock in nbd_genl_connect
There is one use-after-free warning when running NBD_CMD_CONNECT and
NBD_CLEAR_SOCK:
nbd_genl_connect
nbd_alloc_and_init_config // config_refs=1
nbd_start_device // config_refs=2
set NBD_RT_HAS_CONFIG_REF open nbd // config_refs=3
recv_work done // config_refs=2
NBD_CLEAR_SOCK // config_refs=1
close nbd // config_refs=0
refcount_inc -> uaf
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 24 PID: 1014 at lib/refcount.c:25 refcount_warn_saturate+0x12e/0x290
nbd_genl_connect+0x16d0/0x1ab0
genl_family_rcv_msg_doit+0x1f3/0x310
genl_rcv_msg+0x44a/0x790
The issue can be easily reproduced by adding a small delay before
refcount_inc(&nbd->config_refs) in nbd_genl_connect():
mutex_unlock(&nbd->config_lock);
if (!ret) {
set_bit(NBD_RT_HAS_CONFIG_REF, &config->runtime_flags);
+ printk("before sleep\n");
+ mdelay(5 * 1000);
+ printk("after sleep\n");
refcount_inc(&nbd->config_refs);
nbd_connect_reply(info, nbd->index);
} |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: relax BUG() to ocfs2_error() in __ocfs2_move_extent()
In '__ocfs2_move_extent()', relax 'BUG()' to 'ocfs2_error()' just
to avoid crashing the whole kernel due to a filesystem corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check skb->transport_header is set in bpf_skb_check_mtu
The bpf_skb_check_mtu helper needs to use skb->transport_header when
the BPF_MTU_CHK_SEGS flag is used:
bpf_skb_check_mtu(skb, ifindex, &mtu_len, 0, BPF_MTU_CHK_SEGS)
The transport_header is not always set. There is a WARN_ON_ONCE
report when CONFIG_DEBUG_NET is enabled + skb->gso_size is set +
bpf_prog_test_run is used:
WARNING: CPU: 1 PID: 2216 at ./include/linux/skbuff.h:3071
skb_gso_validate_network_len
bpf_skb_check_mtu
bpf_prog_3920e25740a41171_tc_chk_segs_flag # A test in the next patch
bpf_test_run
bpf_prog_test_run_skb
For a normal ingress skb (not test_run), skb_reset_transport_header
is performed but there is plan to avoid setting it as described in
commit 2170a1f09148 ("net: no longer reset transport_header in __netif_receive_skb_core()").
This patch fixes the bpf helper by checking
skb_transport_header_was_set(). The check is done just before
skb->transport_header is used, to avoid breaking the existing bpf prog.
The WARN_ON_ONCE is limited to bpf_prog_test_run, so targeting bpf-next. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: rtl8187: Fix potential buffer underflow in rtl8187_rx_cb()
The rtl8187_rx_cb() calculates the rx descriptor header address
by subtracting its size from the skb tail pointer.
However, it does not validate if the received packet
(skb->len from urb->actual_length) is large enough to contain this
header.
If a truncated packet is received, this will lead to a buffer
underflow, reading memory before the start of the skb data area,
and causing a kernel panic.
Add length checks for both rtl8187 and rtl8187b descriptor headers
before attempting to access them, dropping the packet cleanly if the
check fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: allocate s_dio_done_wq for async reads as well
Since commit 222f2c7c6d14 ("iomap: always run error completions in user
context"), read error completions are deferred to s_dio_done_wq. This
means the workqueue also needs to be allocated for async reads. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
Fixes a crash when layout is null during this call stack:
write_inode
-> nfs4_write_inode
-> pnfs_layoutcommit_inode
pnfs_set_layoutcommit relies on the lseg refcount to keep the layout
around. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attempt
to reference a null layout. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
The DSP event handling code in hwdep_read() could write more bytes to
the user buffer than requested, when a user provides a buffer smaller
than the event header size (8 bytes).
Fix by using min_t() to clamp the copy size, This ensures we never copy
more than the user requested. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: dice: fix buffer overflow in detect_stream_formats()
The function detect_stream_formats() reads the stream_count value directly
from a FireWire device without validating it. This can lead to
out-of-bounds writes when a malicious device provides a stream_count value
greater than MAX_STREAMS.
Fix by applying the same validation to both TX and RX stream counts in
detect_stream_formats(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: wavefront: Fix integer overflow in sample size validation
The wavefront_send_sample() function has an integer overflow issue
when validating sample size. The header->size field is u32 but gets
cast to int for comparison with dev->freemem
Fix by using unsigned comparison to avoid integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corrupted
There's issue when file system corrupted:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1289!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-next
RIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0
RSP: 0018:ffff888117aafa30 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534
RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010
RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0
Call Trace:
<TASK>
__ext4_journal_get_create_access+0x42/0x170
ext4_getblk+0x319/0x6f0
ext4_bread+0x11/0x100
ext4_append+0x1e6/0x4a0
ext4_init_new_dir+0x145/0x1d0
ext4_mkdir+0x326/0x920
vfs_mkdir+0x45c/0x740
do_mkdirat+0x234/0x2f0
__x64_sys_mkdir+0xd6/0x120
do_syscall_64+0x5f/0xfa0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue occurs with us in errors=continue mode when accompanied by
storage failures. There have been many inconsistencies in the file system
data.
In the case of file system data inconsistency, for example, if the block
bitmap of a referenced block is not set, it can lead to the situation where
a block being committed is allocated and used again. As a result, the
following condition will not be satisfied then trigger BUG_ON. Of course,
it is entirely possible to construct a problematic image that can trigger
this BUG_ON through specific operations. In fact, I have constructed such
an image and easily reproduced this issue.
Therefore, J_ASSERT() holds true only under ideal conditions, but it may
not necessarily be satisfied in exceptional scenarios. Using J_ASSERT()
directly in abnormal situations would cause the system to crash, which is
clearly not what we want. So here we directly trigger a JBD abort instead
of immediately invoking BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/spinlock/debug: Fix data-race in do_raw_write_lock
KCSAN reports:
BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lock
write (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1:
do_raw_write_lock+0x120/0x204
_raw_write_lock_irq
do_exit
call_usermodehelper_exec_async
ret_from_fork
read to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0:
do_raw_write_lock+0x88/0x204
_raw_write_lock_irq
do_exit
call_usermodehelper_exec_async
ret_from_fork
value changed: 0xffffffff -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111
Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") has
adressed most of these races, but seems to be not consistent/not complete.
>From do_raw_write_lock() only debug_write_lock_after() part has been
converted to WRITE_ONCE(), but not debug_write_lock_before() part.
Do it now. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()
Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.
Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.
[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
<TASK>
pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
... |
