| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Mitigate potential OOB by removing bogus memset()
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
[bentiss: changed the return value] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Drain commands in target_reset handler
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: file: Use kzalloc_flex for aio_cmd
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
NETIF_F_IPV6_CSUM only advertises support for checksum offload of
packets without IPv6 extension headers. Packets with extension
headers must fall back onto software checksumming. Since TSO
depends on checksum offload, those must revert to GSO.
The below commit introduces that fallback. It always checks
network header length. For tunneled packets, the inner header length
must be checked instead. Extend the check accordingly.
A special case is tunneled packets without inner IP protocol. Such as
RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by
transport header either, so also must revert to the software GSO path. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5, when mod_proxy65 is enabled. Because mod_proxy65 mishandles access control in the activation scenario, relaying of unauthenticated traffic can occur. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by memory leaks from unauthenticated connections. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections. |
| An attachment spoofing issue in WhatsApp for Windows prior to v2.3000.1032164386.258709 could have allowed maliciously formatted documents with embedded NUL bytes in the filename to be shown in the application as one type of file but run as an executable when opened. We have not seen evidence of exploitation in the wild. |
| An unprivileged attacker can craft a user-space process with a malicious ELF binary containing an out-of-range sh_link field. When root-level dtrace attaches to -- or instruments -- that process (via dtrace -p , pid probes, or USDT), the ELF parser reads heap memory beyond the allocated section cache array without any bounds check. This results in an uninitialized/out-of-bounds heap read that can cause a NULL pointer dereference crash of the dtrace process (DoS), or -- depending on heap layout -- a read-then-use of a garbage pointer controlled by adjacent allocations, providing a foothold toward further exploitation in a privileged context. |
| JS8Call through 2.3.1 and JS8Call-improved before 3.0 have a stack-based buffer overflow via a radio transmission of @APRSIS GRID followed by a long Maidenhead locator. This occurs in grid2deg in APRSISClient.cpp. |
| A vulnerability was detected in Dayoooun hwpx-mcp 0.2.0. This affects the function save_document/export_to_text/export_to_html of the file mcp-server/src/index.ts of the component MCP Interface. Performing a manipulation of the argument output_path results in path traversal. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in eyal-gor p_69_branch_monkey_mcp up to 69bc71874ce40050ef45fde5a435855f18af3373. The affected element is an unknown function of the file branch_monkey_mcp/bridge_and_local_actions/routes/advanced.py of the component Preview Endpoint. Such manipulation of the argument dev_script leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in Open5GS up to 2.7.7. This issue affects the function bsf_sess_find_by_ipv6prefix of the file /src/bsf/context.c of the component BSF. This manipulation of the argument ipv6Prefix causes denial of service. It is possible to initiate the attack remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in itsourcecode Courier Management System 1.0. This affects an unknown function of the file /edit_staff.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| A security vulnerability has been detected in libssh2 up to 1.11.1. The impacted element is the function userauth_password of the file src/userauth.c. Such manipulation of the argument username_len/password_len leads to integer overflow. The attack may be launched remotely. The name of the patch is 256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to remediate this issue. |
| A vulnerability was identified in itsourcecode Electronic Judging System 1.0. This affects an unknown part of the file /intrams/login.php. Such manipulation of the argument Username leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used. |
| A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. |
| A flaw has been found in Open5GS up to 2.7.7. This issue affects the function amf_namf_callback_handle_sdm_data_change_notify of the file /namf-callback/v1/{id}/sdmsubscription-notify of the component AMF SBI Endpoint. This manipulation of the argument changeItem.newValue causes denial of service. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
