| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp()
The commit 4f61f133f354 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter
The sch_cake ACK filter parses packets to find the TCP header and filter
duplicated ACKs if the flow is backlogged. The parsing code contains a
WARN_ON(1) which can be triggered by a malformed IP header in certain
cases. Depending on the system configuration, this leads either to
either spamming dmesg with warnings, or a panic if panic_on_warn is set.
The code already correctly skips the offending packet in the branch that
triggers the warning, so the WARN_ON itself doesn't really serve any
purpose. So just drop it altogether to avoid the inconvenient side
effects. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: fix potential use-after-free in tunnel segmentation
__skb_udp_tunnel_segment() gets the UDP header before ensuring the
tunnel header is in the skb head. If the pull reallocates skb->head,
the saved UDP header pointer is no longer valid.
Get the UDP header after the pull to avoid a potential use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate metadata when processing requests
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: require at least 16 bytes of TX metadata
AF_XDP accepts a TX metadata length as small as eight bytes, but every
supported request needs the flags plus at least one eight-byte request
field. Such short metadata also lets the kernel read beyond the registered
area.
Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve
compatibility with applications that do not use launch-time metadata. |
| Improper Authentication vulnerability in team-alembic AshAuthentication allows purpose-limited JWTs to be replayed as full bearer API credentials when a resource uses stateless bearer-token verification.
The bearer-token authentication helper AshAuthentication.Plug.Helpers.retrieve_from_bearer/3 verifies an Authorization: Bearer JWT's signature and rejects tokens containing an act claim, but performs no check that the token's purpose claim equals user at the bearer boundary. When the resource is configured with require_token_presence_for_authentication?: false (the DSL default), the follow-on validate_token/3 helper returns {:ok, nil} without consulting the token resource, so no downstream check on purpose takes place either. As a result, any valid, non-expired JWT the library itself issued for a narrow, single-purpose flow (most notably the purpose: sign_in token that WebAuthn always emits during sign-in, and that the Password strategy emits when sign-in tokens are enabled) is accepted directly as a general-purpose bearer credential and resolves to a full current_user assignment.
This bypasses the library's intended token-exchange contract, in which the sign_in token is meant to be presented exactly once to a preparation that validates the purpose claim and immediately revokes the token. The first use of a still-valid sign-in token presented directly in the Authorization header succeeds because the stateless bearer path never scopes it to purpose == "user".
An attacker who obtains a not-yet-exchanged sign-in token for a target subject (for example via log or referrer leakage, an intercepted magic-link delivery channel, or a partially compromised intermediary) can present it as a bearer token and be authenticated as that subject, fully bypassing the intended one-time-use and revocation semantics. Exploitation additionally requires that the host application wire up retrieve_from_bearer/3 on a reachable route and uses either WebAuthn (sign-in tokens are always issued) or the Password strategy with sign_in_tokens_enabled?: true. Resources configured with require_token_presence_for_authentication?: true (including applications scaffolded by the Igniter installer since v4.5.0) and the session-based path (authenticate_resource_from_session/4) enforce purpose == "user" against the stored token record and are not affected.
This issue affects ash_authentication: from 3.10.5 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13. |
| Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in team-alembic AshAuthentication allows reflected cross-site scripting via the confirmation and magic link interaction forms.
When a strategy is configured with require_interaction? set to true, AshAuthentication serves an intermediate HTML page asking the user to confirm the action by submitting a form. Both such pages embed a request parameter directly into a hidden input's value attribute without HTML escaping: lib/ash_authentication/add_ons/confirmation/confirmation_form.html.eex interpolates the confirm parameter, and lib/ash_authentication/strategies/magic_link/sign_in_form.html.eex interpolates the magic link token parameter. These templates are compiled with EEx.function_from_file/3 using plain <%= %> expressions, which perform no escaping, so the parameter is reflected verbatim.
Neither accept handler validates the value before rendering it. AshAuthentication.AddOn.Confirmation.Plug.accept/2 only checks that a confirm key is present, and AshAuthentication.Strategy.MagicLink.Plug.accept/2 reads the parameter directly, so no token signature is verified at this stage and arbitrary attacker-supplied text reaches the template. An unauthenticated attacker can therefore craft a URL whose parameter terminates the attribute and injects markup, for example a quote followed by a <script> element. Because the accept phase is served over GET, loading the crafted link is sufficient; no form submission or prior authentication is required.
The injected script executes in the origin of the application embedding AshAuthentication, giving it access to that origin's cookies, session, and same-origin responses. Since these pages are part of the authentication flow, a victim following what appears to be a legitimate confirmation or sign-in link is a plausible target.
This issue affects ash_authentication: from 4.8.0 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix use-after-free of cached ASCONF chunk
addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal
ASCONF-ACK completion path releases the chunk and clears the pointer.
However, sctp_asconf_queue_teardown() releases the cached chunk without
clearing addip_last_asconf. During peer restart handling,
sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes
sctp_asconf_queue_teardown() while the association remains alive and leaves
the pointer dangling.
A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(),
which accesses the stale chunk and passes it to sctp_process_asconf_ack(),
causing a use-after-free and a second release.
Clearing the pointer exposes a race with T4 expiry. Peer restart handling
queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses
timer_delete(), which does not wait for a callback already running on
another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after
the purge and dereference NULL.
Clear addip_last_asconf after releasing the cached chunk, and make
sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding
ASCONF remains. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free in cifs_try_adding_channels()
cifs_try_adding_channels() takes a temporary reference to an interface
before dropping iface_lock. If cifs_ses_add_channel() fails, it drops
that reference and then increments iface->weight_fulfilled.
A concurrent interface list refresh can remove the list reference while
channel creation is in progress. In that case, the failure-path
kref_put() releases the last reference and frees iface. Updating
weight_fulfilled afterward then accesses freed memory.
Increment weight_fulfilled before dropping the temporary reference,
keeping iface alive for the final access. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: rx: restore msg_iter before TLS 1.3 optimistic retry
tls_decrypt_sg() advances msg->msg_iter when it maps user pages for
the optimistic TLS 1.3 zero-copy path. If the decrypted record turns
out not to be unpadded application data, tls_decrypt_sw() retries into
a kernel skb, but leaves the iterator advanced.
The subsequent copy from the skb then writes decrypted bytes again at
a later point in the caller iovecs while recvmsg() reports only the
post-retry length. A TLS peer can trigger this after the receiver
enables TLS_RX_EXPECT_NO_PAD.
Revert the iterator by the number of bytes consumed by the optimistic
mapping before retrying without zero-copy.
Add a selftest which sends a TLS 1.3 control record with
TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not
overwrite later iovecs beyond the returned length. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix skb length accounting after XDP frag adjustment
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: initialise dibs->lock in dibs_dev_alloc()
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
net: smc: fix splice entry lifetime imbalance in smc_rx_splice
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bitblit: bound-check glyph index in bit_cursor()
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e765a
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: fix OOB write in fcp_meter_ctl_get()
fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size
by the driver's own limit of 255
if (map.map_size < 1 || map.map_size > 255 ||
map.meter_slots < 1 || map.meter_slots > 255)
return -EINVAL;
and passes it to fcp_add_new_ctl() as the control's channel count, where
it is stored as elem->channels.
Every control read writes into struct snd_ctl_elem_value, whose integer
array is declared long value[128], so the limit is 128, not 255.
fcp_meter_ctl_get() stores one 64-bit word per channel into that array
with no bound of its own:
for (i = 0; i < elem->channels; i++) {
int idx = private->meter_level_map[i];
int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]);
ucontrol->value.integer.value[i] = value;
}
snd_ctl_elem_read_user() serves that object from
memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of
kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so
element i is written at byte 72 + 8 * i and element 144 already lands
past the allocation. At map_size 255 the last store ends at byte 2112,
888 bytes past the object and 64 bytes into the adjacent slab object.
The stored words come from the device and meter_level_map[] selects
which word lands in which slot, so extent and contents are both
controlled.
The core does not catch this. snd_ctl_check_elem_info() is reached only
from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under
CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a
compile-time true. __snd_ctl_add_replace() validates kcontrol->count and
never inspects elem->channels.
Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives
the hwdep descriptor that created it, so the out-of-bounds stores are
issued by any process able to read controls on /dev/snd/controlC0.
KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read:
BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get
Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185
__asan_store8
fcp_meter_ctl_get
snd_ctl_elem_read
snd_ctl_ioctl
Allocated by task 185:
memdup_user
snd_ctl_ioctl
The buggy address is located 0 bytes to the right of
allocated 1224-byte region [ffff000017af0000, ffff000017af04c8)
Bound the map size by the ABI limit rather than by 255, and bound the
store loop at the sink so it cannot run past the value array whatever
elem->channels holds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| A Use of Default Password vulnerability affecting Tuleap Enterprise Edition from 17.0 through 17.5 could allow an attacker to gain access to user accounts created during XML import. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: Fix UAF of sba and ieq during ism_dev_exit()
A ism interrupt handler can be active in parallel with ism_dev_exit(),
accessing freed data structures.
No new interrupts will be generated after unregister_ieq(). Drain ongoing
interrupt handlers by free_irq(), before freeing ism data structures. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Disable EOP for TPA on all chips to prevent data corruption
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption. |
