| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check dce_hwseq before dereferencing it
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
(cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix use-after-free during router port configuration
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix race between nfsd registration and exports_proc
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: csa unmap use uninterruptible lock
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
(cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab) |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_session_rpc_open
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
Fix memory leak in posix_clock_open()
If the clk ops.open() function returns an error, we don't release the
pccontext we allocated for this clock.
Re-organize the code slightly to make it all more obvious. |
| Dell UnityVSA, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| Dell Unity, version(s) 5.5.2 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| Generation of Error Message Containing Sensitive Information vulnerability in Codriapp Innovation and Software Technologies Inc. HeyGarson allows Fuzzing for application mapping.This issue affects HeyGarson: through 30012026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| An unrestricted upload of file with dangerous type vulnerability in the file upload function of Interinfo DreamMaker versions before 2025/10/22 allows remote attackers to execute arbitrary system commands via a malicious class file. |
| A missing authentication for critical function vulnerability in the /servlet/baServer3 endpoint of Interinfo DreamMaker versions before 2025/10/22 allows remote attackers to access exposed administrative functionality without prior authentication. |
| In the Eclipse OMR port library component since release 0.2.0, an API function to return the textual names of all supported processor features was not accounting for the separator inserted between processor features. If the output buffer supplied to this function was incorrectly sized, failing to account for the separator when determining when a write to the buffer was safe could lead to a buffer overflow. This issue is fixed in Eclipse OMR version 0.8.0. |
| Improper Link Resolution Before File Access (invoked by 1E‑Explorer‑TachyonCore‑DeleteFileByPath instruction) in TeamViewer DEX - 1E Client before version 26.1 on Windows allows a low‑privileged local attacker to delete protected system files via a crafted RPC control junction or symlink that is followed when the delete instruction executes. |
| The Custom Login Page Customizer WordPress plugin before 2.5.4 does not have a proper password reset process, allowing a few unauthenticated requests to reset the password of any user by knowing their username, such as administrator ones, and therefore gain access to their account |
| An input validation vulnerability in the flow.scatter/flow.scatter_add component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted indices. |
| A segmentation violation in the oneflow._oneflow_internal.autograd.Function.FunctionCtx.mark_non_differentiable component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A HTML injection vulnerability exists in the file upload functionality of Cacti <= 1.2.29. When a file with an invalid format is uploaded, the application reflects the submitted filename back into an error popup without proper sanitization. As a result, attackers can inject arbitrary HTML elements (e.g., <h1>, <b>, <svg>) into the rendered page. |
| An input validation vulnerability in the flow.Tensor.new_empty/flow.Tensor.new_ones/flow.Tensor.new_zeros component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
