| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: The 'openssl dgst' command-line tool silently truncates input
data to 16MB when using one-shot signing algorithms and reports success instead
of an error.
Impact summary: A user signing or verifying files larger than 16MB with
one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire
file is authenticated while trailing data beyond 16MB remains unauthenticated.
When the 'openssl dgst' command is used with algorithms that only support
one-shot signing (Ed25519, Ed448, ML-DSA-44, ML-DSA-65, ML-DSA-87), the input
is buffered with a 16MB limit. If the input exceeds this limit, the tool
silently truncates to the first 16MB and continues without signaling an error,
contrary to what the documentation states. This creates an integrity gap where
trailing bytes can be modified without detection if both signing and
verification are performed using the same affected codepath.
The issue affects only the command-line tool behavior. Verifiers that process
the full message using library APIs will reject the signature, so the risk
primarily affects workflows that both sign and verify with the affected
'openssl dgst' command. Streaming digest algorithms for 'openssl dgst' and
library users are unaffected.
The FIPS modules in 3.5 and 3.6 are not affected by this issue, as the
command-line tools are outside the OpenSSL FIPS module boundary.
OpenSSL 3.5 and 3.6 are vulnerable to this issue.
OpenSSL 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Issue summary: If an application using the SSL_CIPHER_find() function in
a QUIC protocol client or server receives an unknown cipher suite from
the peer, a NULL dereference occurs.
Impact summary: A NULL pointer dereference leads to abnormal termination of
the running process causing Denial of Service.
Some applications call SSL_CIPHER_find() from the client_hello_cb callback
on the cipher ID received from the peer. If this is done with an SSL object
implementing the QUIC protocol, NULL pointer dereference will happen if
the examined cipher ID is unknown or unsupported.
As it is not very common to call this function in applications using the QUIC
protocol and the worst outcome is Denial of Service, the issue was assessed
as Low severity.
The vulnerable code was introduced in the 3.2 version with the addition
of the QUIC protocol support.
The FIPS modules in 3.6, 3.5, 3.4 and 3.3 are not affected by this issue,
as the QUIC implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4 and 3.3 are vulnerable to this issue.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Issue summary: Parsing CMS AuthEnvelopedData message with maliciously
crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| Issue summary: PBMAC1 parameters in PKCS#12 files are missing validation
which can trigger a stack-based buffer overflow, invalid pointer or NULL
pointer dereference during MAC verification.
Impact summary: The stack buffer overflow or NULL pointer dereference may
cause a crash leading to Denial of Service for an application that parses
untrusted PKCS#12 files. The buffer overflow may also potentially enable
code execution depending on platform mitigations.
When verifying a PKCS#12 file that uses PBMAC1 for the MAC, the PBKDF2
salt and keylength parameters from the file are used without validation.
If the value of keylength exceeds the size of the fixed stack buffer used
for the derived key (64 bytes), the key derivation will overflow the buffer.
The overflow length is attacker-controlled. Also, if the salt parameter is
not an OCTET STRING type this can lead to invalid or NULL pointer
dereference.
Exploiting this issue requires a user or application to process
a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted
PKCS#12 files in applications as they are usually used to store private
keys which are trusted by definition. For this reason the issue was assessed
as Moderate severity.
The FIPS modules in 3.6, 3.5 and 3.4 are not affected by this issue, as
PKCS#12 processing is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5 and 3.4 are vulnerable to this issue.
OpenSSL 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue as they do
not support PBMAC1 in PKCS#12. |
| PHPUnit is a testing framework for PHP. A vulnerability has been discovered in versions prior to 12.5.8, 11.5.50, 10.5.62, 9.6.33, and 8.5.52 involving unsafe deserialization of code coverage data in PHPT test execution. The vulnerability exists in the `cleanupForCoverage()` method, which deserializes code coverage files without validation, potentially allowing remote code execution if malicious `.coverage` files are present prior to the execution of the PHPT test. The vulnerability occurs when a `.coverage` file, which should not exist before test execution, is deserialized without the `allowed_classes` parameter restriction. An attacker with local file write access can place a malicious serialized object with a `__wakeup()` method into the file system, leading to arbitrary code execution during test runs with code coverage instrumentation enabled. This vulnerability requires local file write access to the location where PHPUnit stores or expects code coverage files for PHPT tests. This can occur through CI/CD pipeline attacks, the local development environment, and/or compromised dependencies. Rather than just silently sanitizing the input via `['allowed_classes' => false]`, the maintainer has chosen to make the anomalous state explicit by treating pre-existing `.coverage` files for PHPT tests as an error condition. Starting in versions in versions 12.5.8, 11.5.50, 10.5.62, 9.6.33, when a `.coverage` file is detected for a PHPT test prior to execution, PHPUnit will emit a clear error message identifying the anomalous state. Organizations can reduce the effective risk of this vulnerability through proper CI/CD configuration, including ephemeral runners, code review enforcement, branch protection, artifact isolation, and access control. |
| Kargo manages and automates the promotion of software artifacts. Prior to versions 1.8.7, 1.7.7, and 1.6.3, a bug was found with authentication checks on the `GetConfig()` API endpoint. This allowed unauthenticated users to access this endpoint by specifying an `Authorization` header with any non-empty `Bearer` token value, regardless of validity. This vulnerability did allow for exfiltration of configuration data such as endpoints for connected Argo CD clusters. This data could allow an attacker to enumerate cluster URLs and namespaces for use in subsequent attacks. Additionally, the same bug affected the `RefreshResource` endpoint. This endpoint does not lead to any information disclosure, but could be used by an unauthenticated attacker to perform a denial-of-service style attack against the Kargo API. `RefreshResource` sets an annotation on specific Kubernetes resources to trigger reconciliations. If run on a constant loop, this could also slow down legitimate requests to the Kubernetes API server. This problem has been patched in Kargo versiosn 1.8.7, 1.7.7, and 1.6.3. There are no workarounds for this issue. |
| Issue summary: Processing a malformed PKCS#12 file can trigger a NULL pointer
dereference in the PKCS12_item_decrypt_d2i_ex() function.
Impact summary: A NULL pointer dereference can trigger a crash which leads to
Denial of Service for an application processing PKCS#12 files.
The PKCS12_item_decrypt_d2i_ex() function does not check whether the oct
parameter is NULL before dereferencing it. When called from
PKCS12_unpack_p7encdata() with a malformed PKCS#12 file, this parameter can
be NULL, causing a crash. The vulnerability is limited to Denial of Service
and cannot be escalated to achieve code execution or memory disclosure.
Exploiting this issue requires an attacker to provide a malformed PKCS#12 file
to an application that processes it. For that reason the issue was assessed as
Low severity according to our Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| gmrtd is a Go library for reading Machine Readable Travel Documents (MRTDs). Prior to version 0.17.2, ReadFile accepts TLVs with lengths that can range up to 4GB, which can cause unconstrained resource consumption in both memory and cpu cycles. ReadFile can consume an extended TLV with lengths well outside what would be available in ICs. It can accept something all the way up to 4GB which would take too many iterations in 256 byte chunks, and would also try to allocate memory that might not be available in constrained environments like phones. Or if an API sends data to ReadFile, the same problem applies. The very small chunked read also locks the goroutine in accepting data for a very large number of iterations. projects using the gmrtd library to read files from NFCs can experience extreme slowdowns or memory consumption. A malicious NFC can just behave like the mock transceiver described above and by just sending dummy bytes as each chunk to be read, can make the receiving thread unresponsive and fill up memory on the host system. Version 0.17.2 patches the issue. |
| This High severity XXE (XML External Entity Injection) vulnerability was introduced in version 7.1.0 of Crowd Data Center and Server.
This XXE (XML External Entity Injection) vulnerability, with a CVSS Score of 7.9, allows an authenticated attacker to access local and remote content which has high impact to confidentiality, low impact to integrity, high impact to availability, and requires no user interaction.
Atlassian recommends that Crowd Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions:
* Crowd Data Center and Server 7.1: Upgrade to a release greater than or equal to 7.1.3
See the release notes (https://confluence.atlassian.com/crowd/crowd-release-notes-199094.html). You can download the latest version of Crowd Data Center and Server from the download center (https://www.atlassian.com/software/crowd/download-archive).
This vulnerability was reported via our Atlassian (Internal) program. |
| Meshtastic is an open source mesh networking solution. In the current Meshtastic architecture, a Node is identified by their NodeID, generated from the MAC address, rather than their public key. This aspect downgrades the security, specifically by abusing the HAM mode which doesn't use encryption. An attacker can, as such, forge a NodeInfo on behalf of a victim node advertising that the HAM mode is enabled. This, in turn, will allow the other nodes on the mesh to accept the new information and overwriting the NodeDB. The other nodes will then only be able to send direct messages to the victim by using the shared channel key instead of the PKC. Additionally, because HAM mode by design doesn't provide any confidentiality or authentication of information, the attacker could potentially also be able to change the Node details, like the full name, short code, etc. To keep the attack persistent, it is enough to regularly resend the forged NodeInfo, in particular right after the victim sends their own. A patch is available in version 2.7.6.834c3c5. |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to version 0.14.1, a Server-Side Request Forgery (SSRF) vulnerability exists in the `MediaConnector` class within the vLLM project's multimodal feature set. The load_from_url and load_from_url_async methods obtain and process media from URLs provided by users, using different Python parsing libraries when restricting the target host. These two parsing libraries have different interpretations of backslashes, which allows the host name restriction to be bypassed. This allows an attacker to coerce the vLLM server into making arbitrary requests to internal network resources. This vulnerability is particularly critical in containerized environments like `llm-d`, where a compromised vLLM pod could be used to scan the internal network, interact with other pods, and potentially cause denial of service or access sensitive data. For example, an attacker could make the vLLM pod send malicious requests to an internal `llm-d` management endpoint, leading to system instability by falsely reporting metrics like the KV cache state. Version 0.14.1 contains a patch for the issue. |
| Wasmtime is a runtime for WebAssembly. Starting in version 29.0.0 and prior to version 36.0.5, 40.0.3, and 41.0.1, on x86-64 platforms with AVX, Wasmtime's compilation of the `f64.copysign` WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but unless there is another bug in Cranelift this data is not visible to WebAssembly guests. Wasmtime 36.0.5, 40.0.3, and 41.0.1 have been released to fix this issue. Users are recommended to upgrade to the patched versions of Wasmtime. Other affected versions are not patched and users should updated to supported major version instead. This bug can be worked around by enabling signals-based-traps. While disabling guard pages can be a quick fix in some situations, it's not recommended to disabled guard pages as it is a key defense-in-depth measure of Wasmtime. |
| OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up to and including 1.11.5 are affected by a (theoretical) timing attack vulnerability that allows API key extraction over the network. Due to using character based comparison that short-circuits on the first mismatched character during API key validation, rather than a cryptographical method with static runtime regardless of the point of mismatch, an attacker with network based access to an affected OctoPrint could extract API keys valid on the instance by measuring the response times of the denied access responses and guess an API key character by character. The vulnerability is patched in version 1.11.6. The likelihood of this attack actually working is highly dependent on the network's latency, noise and similar parameters. An actual proof of concept was not achieved so far. Still, as always administrators are advised to not expose their OctoPrint instance on hostile networks, especially not on the public Internet. |
| Cassandra Web 0.5.0 contains a directory traversal vulnerability that allows unauthenticated attackers to read arbitrary files by manipulating path traversal parameters. Attackers can exploit the disabled Rack::Protection module to read sensitive system files like /etc/passwd and retrieve Apache Cassandra database credentials. |
| WinAVR version 20100110 contains an insecure permissions vulnerability that allows authenticated users to modify system files and executables. Attackers can leverage the overly permissive access controls to potentially modify critical DLLs and executable files in the WinAVR installation directory. |
| Motorola Device Manager 2.4.5 contains an unquoted service path vulnerability in the PST Service that allows local users to potentially execute arbitrary code. Attackers can exploit the unquoted path in ForwardDaemon.exe to inject malicious code that will execute with elevated system privileges during service startup. |
| Acer Global Registration Service 1.0.0.3 contains an unquoted service path vulnerability in its service configuration that allows local users to potentially execute arbitrary code. Attackers can exploit the unquoted path in C:\Program Files (x86)\Acer\Registration\ to inject malicious executables that would run with elevated LocalSystem privileges during service startup. |
| EPSON Status Monitor 3 version 8.0 contains an unquoted service path vulnerability that allows local attackers to potentially execute arbitrary code by exploiting the service binary path. Attackers can leverage the unquoted path in 'C:\Program Files\Common Files\EPSON\EPW!3SSRP\E_S60RPB.EXE' to inject malicious executables and escalate privileges. |
| TapinRadio 2.13.7 contains a denial of service vulnerability in the application proxy settings that allows attackers to crash the program by overflowing input fields. Attackers can paste a large buffer of 20,000 characters into the username and address fields to cause the application to become unresponsive and require reinstallation. |
| SyncBreeze 10.0.28 contains a denial of service vulnerability in the login endpoint that allows remote attackers to crash the service. Attackers can send an oversized payload in the login request to overwhelm the application and potentially disrupt service availability. |
