| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid fcport pointer dereference
Klocwork reported warning of NULL pointer may be dereferenced. The routine
exits when sa_ctl is NULL and fcport is allocated after the exit call thus
causing NULL fcport pointer to dereference at the time of exit.
To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leak in WMI firmware stats
Memory allocated for firmware pdev, vdev and beacon statistics
are not released during rmmod.
Fix it by calling ath11k_fw_stats_free() function before hardware
unregister.
While at it, avoid calling ath11k_fw_stats_free() while processing
the firmware stats received in the WMI event because the local list
is getting spliced and reinitialised and hence there are no elements
in the list after splicing.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: do not assume skb mac_header is set
Drivers must not assume in their ndo_start_xmit() that
skbs have their mac_header set. skb->data is all what is needed.
bonding seems to be one of the last offender as caught by syzbot:
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470
Modules linked in:
CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline]
RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline]
RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]
RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]
RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]
RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]
RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470
Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e fe
RSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283
RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000
RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6
RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584
R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7e
R13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76
FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
[<ffffffff8471a49f>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff8471a49f>] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380
[<ffffffff851d845b>] dev_direct_xmit include/linux/netdevice.h:3043 [inline]
[<ffffffff851d845b>] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284
[<ffffffff851c7472>] packet_snd net/packet/af_packet.c:3112 [inline]
[<ffffffff851c7472>] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143
[<ffffffff8467a4b2>] sock_sendmsg_nosec net/socket.c:716 [inline]
[<ffffffff8467a4b2>] sock_sendmsg net/socket.c:736 [inline]
[<ffffffff8467a4b2>] __sys_sendto+0x472/0x5f0 net/socket.c:2139
[<ffffffff8467a715>] __do_sys_sendto net/socket.c:2151 [inline]
[<ffffffff8467a715>] __se_sys_sendto net/socket.c:2147 [inline]
[<ffffffff8467a715>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147
[<ffffffff8553071f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff8553071f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
[<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix kasan splat when generating ipv4 pmtu error
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix missing initialisation affecting gcm-aes-s390
Fix af_alg_alloc_areq() to initialise areq->first_rsgl.sgl.sgt.sgl to point
to the scatterlist array in areq->first_rsgl.sgl.sgl.
Without this, the gcm-aes-s390 driver will oops when it tries to do
gcm_walk_start() on req->dst because req->dst is set to the value of
areq->first_rsgl.sgl.sgl by _aead_recvmsg() calling
aead_request_set_crypt().
The problem comes if an empty ciphertext is passed: the loop in
af_alg_get_rsgl() just passes straight out and doesn't set areq->first_rsgl
up.
This isn't a problem on x86_64 using gcmaes_crypt_by_sg() because, as far
as I can tell, that ignores req->dst and only uses req->src[*].
[*] Is this a bug in aesni-intel_glue.c?
The s390x oops looks something like:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000a00000000 TEID: 0000000a00000803
Fault in home space mode while using kernel ASCE.
AS:00000000a43a0007 R3:0000000000000024
Oops: 003b ilc:2 [#1] SMP
...
Call Trace:
[<000003ff7fc3d47e>] gcm_walk_start+0x16/0x28 [aes_s390]
[<00000000a2a342f2>] crypto_aead_decrypt+0x9a/0xb8
[<00000000a2a60888>] aead_recvmsg+0x478/0x698
[<00000000a2e519a0>] sock_recvmsg+0x70/0xb0
[<00000000a2e51a56>] sock_read_iter+0x76/0xa0
[<00000000a273e066>] vfs_read+0x26e/0x2a8
[<00000000a273e8c4>] ksys_read+0xbc/0x100
[<00000000a311d808>] __do_syscall+0x1d0/0x1f8
[<00000000a312ff30>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003ff7fc3e6b4>] gcm_aes_crypt+0x104/0xa68 [aes_s390] |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Range check CHDBOFF and ERDBOFF
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix mid leak during reconnection after timeout threshold
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: base: Free devm resources when unregistering a device
In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.
This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.
We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.
This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.
This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: mcs: Fix NULL pointer dereferences
When system is rebooted after creating macsec interface
below NULL pointer dereference crashes occurred. This
patch fixes those crashes by using correct order of teardown
[ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 3324.415726] Mem abort info:
[ 3324.418510] ESR = 0x96000006
[ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3324.426865] SET = 0, FnV = 0
[ 3324.429913] EA = 0, S1PTW = 0
[ 3324.433047] Data abort info:
[ 3324.435921] ISV = 0, ISS = 0x00000006
[ 3324.439748] CM = 0, WnR = 0
....
[ 3324.575915] Call trace:
[ 3324.578353] cn10k_mdo_del_secy+0x24/0x180
[ 3324.582440] macsec_common_dellink+0xec/0x120
[ 3324.586788] macsec_notify+0x17c/0x1c0
[ 3324.590529] raw_notifier_call_chain+0x50/0x70
[ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c
[ 3324.599921] rollback_registered_many+0x354/0x5bc
[ 3324.604616] unregister_netdevice_queue+0x88/0x10c
[ 3324.609399] unregister_netdev+0x20/0x30
[ 3324.613313] otx2_remove+0x8c/0x310
[ 3324.616794] pci_device_shutdown+0x30/0x70
[ 3324.620882] device_shutdown+0x11c/0x204
[ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 966.673712] Mem abort info:
[ 966.676497] ESR = 0x96000006
[ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits
[ 966.684848] SET = 0, FnV = 0
[ 966.687895] EA = 0, S1PTW = 0
[ 966.691028] Data abort info:
[ 966.693900] ISV = 0, ISS = 0x00000006
[ 966.697729] CM = 0, WnR = 0
[ 966.833467] Call trace:
[ 966.835904] cn10k_mdo_stop+0x20/0xa0
[ 966.839557] macsec_dev_stop+0xe8/0x11c
[ 966.843384] __dev_close_many+0xbc/0x140
[ 966.847298] dev_close_many+0x84/0x120
[ 966.851039] rollback_registered_many+0x114/0x5bc
[ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0
[ 966.860952] unregister_netdevice_many+0x18/0x24
[ 966.865560] macsec_notify+0x1ac/0x1c0
[ 966.869303] raw_notifier_call_chain+0x50/0x70
[ 966.873738] call_netdevice_notifiers_info+0x34/0x7c
[ 966.878694] rollback_registered_many+0x354/0x5bc
[ 966.883390] unregister_netdevice_queue+0x88/0x10c
[ 966.888173] unregister_netdev+0x20/0x30
[ 966.892090] otx2_remove+0x8c/0x310
[ 966.895571] pci_device_shutdown+0x30/0x70
[ 966.899660] device_shutdown+0x11c/0x204
[ 966.903574] __do_sys_reboot+0x208/0x290
[ 966.907487] __arm64_sys_reboot+0x20/0x30
[ 966.911489] el0_svc_handler+0x80/0x1c0
[ 966.915316] el0_svc+0x8/0x180
[ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060)
[ 966.924448] ---[ end trace 341778e799c3d8d7 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix resource leak in device_add()
When calling kobject_add() failed in device_add(), it will call
cleanup_glue_dir() to free resource. But in kobject_add(),
dev->kobj.parent has been set to NULL. This will cause resource leak.
The process is as follows:
device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add() //kobject_get()
...
dev->kobj.parent = kobj;
...
kobject_add() //failed, but set dev->kobj.parent = NULL
...
glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto
//"Error" label
...
cleanup_glue_dir() //becaues glue_dir is NULL, not call
//kobject_put()
The preceding problem may cause insmod mac80211_hwsim.ko to failed.
sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim'
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x224/0x280
kobject_add_internal+0x2aa/0x880
kobject_add+0x135/0x1a0
get_device_parent+0x3d7/0x590
device_add+0x2aa/0x1cb0
device_create_groups_vargs+0x1eb/0x260
device_create+0xdc/0x110
mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim]
init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim]
do_one_initcall+0x10f/0x630
do_init_module+0x19f/0x5e0
load_module+0x64b7/0x6eb0
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to
register things with the same name in the same directory. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Release folio lock on fscache read hit.
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
$ cat /proc/3890/task/12864/stack
[<0>] folio_wait_bit_common+0x124/0x350
[<0>] filemap_read_folio+0xad/0xf0
[<0>] filemap_fault+0x8b1/0xab0
[<0>] __do_fault+0x39/0x150
[<0>] do_fault+0x25c/0x3e0
[<0>] __handle_mm_fault+0x6ca/0xc70
[<0>] handle_mm_fault+0xe9/0x350
[<0>] do_user_addr_fault+0x225/0x6c0
[<0>] exc_page_fault+0x84/0x1b0
[<0>] asm_exc_page_fault+0x27/0x30
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sifive: Fix refcount leak in sifive_gpio_probe
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix deadlock in tc route query code
Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:
- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.
- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.
- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.
[0]:
[ 164.599612] ======================================================
[ 164.600142] WARNING: possible circular locking dependency detected
[ 164.600667] 6.3.0-rc3+ #1 Not tainted
[ 164.601021] ------------------------------------------------------
[ 164.601557] handler1/3456 is trying to acquire lock:
[ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.603078]
but task is already holding lock:
[ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.604459]
which lock already depends on the new lock.
[ 164.605190]
the existing dependency chain (in reverse order) is:
[ 164.605848]
-> #1 (&comp->sem){++++}-{3:3}:
[ 164.606380] down_read+0x39/0x50
[ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core]
[ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core]
[ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core]
[ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core]
[ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core]
[ 164.610741] tc_setup_cb_add+0xd4/0x200
[ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.611661] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.612116] tc_new_tfilter+0x3fc/0xd20
[ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.612936] netlink_rcv_skb+0x54/0x100
[ 164.613339] netlink_unicast+0x190/0x250
[ 164.613746] netlink_sendmsg+0x245/0x4a0
[ 164.614150] sock_sendmsg+0x38/0x60
[ 164.614522] ____sys_sendmsg+0x1d0/0x1e0
[ 164.614934] ___sys_sendmsg+0x80/0xc0
[ 164.615320] __sys_sendmsg+0x51/0x90
[ 164.615701] do_syscall_64+0x3d/0x90
[ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.616568]
-> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}:
[ 164.617210] __lock_acquire+0x159e/0x26e0
[ 164.617638] lock_acquire+0xc2/0x2a0
[ 164.618018] __mutex_lock+0x92/0xcd0
[ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.618943] post_process_attr+0x153/0x2d0 [
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136]
Call Trace:
<TASK>
sctp_sched_prio_free_sid+0xab/0x100 [sctp]
sctp_stream_free_ext+0x64/0xa0 [sctp]
sctp_stream_free+0x31/0x50 [sctp]
sctp_association_free+0xa5/0x200 [sctp]
Note that it doesn't need to use refcount_t type for this counter,
as its accessing is always protected under the sock lock.
v1->v2:
- add a check in sctp_sched_prio_set to avoid the possible prio_head
refcnt overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't trust firmware n_channels
If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.
Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check for station first in client probe
When probing a client, first check if we have it, and then
check for the channel context, otherwise you can trigger
the warning there easily by probing when the AP isn't even
started yet. Since a client existing means the AP is also
operating, we can then keep the warning.
Also simplify the moved code a bit. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Sync IRQ works before buffer destruction
If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):
BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
Read of size 8 at addr 000000006d640a48 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7
Stack:
60c4f20f 0c203d48 41b58ab3 60f224fc
600477fa 60f35687 60c4f20f 601273dd
00000008 6101eb00 6101eab0 615be548
Call Trace:
[<60047a58>] show_stack+0x25e/0x282
[<60c609e0>] dump_stack_lvl+0x96/0xfd
[<60c50d4c>] print_report+0x1a7/0x5a8
[<603078d3>] kasan_report+0xc1/0xe9
[<60308950>] __asan_report_load8_noabort+0x1b/0x1d
[<60232844>] irq_work_run_list+0x11a/0x13a
[<602328b4>] irq_work_tick+0x24/0x34
[<6017f9dc>] update_process_times+0x162/0x196
[<6019f335>] tick_sched_handle+0x1a4/0x1c3
[<6019fd9e>] tick_sched_timer+0x79/0x10c
[<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
[<60182913>] hrtimer_interrupt+0x16c/0x2c4
[<600486a3>] um_timer+0x164/0x183
[...]
Allocated by task 411:
save_stack_trace+0x99/0xb5
stack_trace_save+0x81/0x9b
kasan_save_stack+0x2d/0x54
kasan_set_track+0x34/0x3e
kasan_save_alloc_info+0x25/0x28
____kasan_kmalloc+0x8b/0x97
__kasan_kmalloc+0x10/0x12
__kmalloc+0xb2/0xe8
load_elf_phdrs+0xee/0x182
[...]
The buggy address belongs to the object at 000000006d640800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 584 bytes inside of
freed 1024-byte region [000000006d640800, 000000006d640c00)
Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.
Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix multiple LUN_RESET handling
This fixes a bug where an initiator thinks a LUN_RESET has cleaned up
running commands when it hasn't. The bug was added in commit 51ec502a3266
("target: Delete tmr from list before processing").
The problem occurs when:
1. We have N I/O cmds running in the target layer spread over 2 sessions.
2. The initiator sends a LUN_RESET for each session.
3. session1's LUN_RESET loops over all the running commands from both
sessions and moves them to its local drain_task_list.
4. session2's LUN_RESET does not see the LUN_RESET from session1 because
the commit above has it remove itself. session2 also does not see any
commands since the other reset moved them off the state lists.
5. sessions2's LUN_RESET will then complete with a successful response.
6. sessions2's inititor believes the running commands on its session are
now cleaned up due to the successful response and cleans up the running
commands from its side. It then restarts them.
7. The commands do eventually complete on the backend and the target
starts to return aborted task statuses for them. The initiator will
either throw a invalid ITT error or might accidentally lookup a new
task if the ITT has been reallocated already.
Fix the bug by reverting the patch, and serialize the execution of
LUN_RESETs and Preempt and Aborts.
Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list,
because it turns out the original patch fixed a bug that was not
mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second
LUN_RESET and wait on it. Then the second reset will run
core_tmr_drain_tmr_list and see the first reset and wait on it resulting in
a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject unhashed sockets in bpf_sk_assign
The semantics for bpf_sk_assign are as follows:
sk = some_lookup_func()
bpf_sk_assign(skb, sk)
bpf_sk_release(sk)
That is, the sk is not consumed by bpf_sk_assign. The function
therefore needs to make sure that sk lives long enough to be
consumed from __inet_lookup_skb. The path through the stack for a
TCPv4 packet is roughly:
netif_receive_skb_core: takes RCU read lock
__netif_receive_skb_core:
sch_handle_ingress:
tcf_classify:
bpf_sk_assign()
deliver_ptype_list_skb:
deliver_skb:
ip_packet_type->func == ip_rcv:
ip_rcv_core:
ip_rcv_finish_core:
dst_input:
ip_local_deliver:
ip_local_deliver_finish:
ip_protocol_deliver_rcu:
tcp_v4_rcv:
__inet_lookup_skb:
skb_steal_sock
The existing helper takes advantage of the fact that everything
happens in the same RCU critical section: for sockets with
SOCK_RCU_FREE set bpf_sk_assign never takes a reference.
skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put
if necessary.
This approach assumes that SOCK_RCU_FREE is never set on a sk
between bpf_sk_assign and skb_steal_sock, but this invariant is
violated by unhashed UDP sockets. A new UDP socket is created
in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only
added in udp_lib_get_port() which happens when a socket is bound.
When bpf_sk_assign was added it wasn't possible to access unhashed
UDP sockets from BPF, so this wasn't a problem. This changed
in commit 0c48eefae712 ("sock_map: Lift socket state restriction
for datagram sockets"), but the helper wasn't adjusted accordingly.
The following sequence of events will therefore lead to a refcount
leak:
1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.
2. Pull socket out of sockmap and bpf_sk_assign it. Since
SOCK_RCU_FREE is not set we increment the refcount.
3. bind() or connect() the socket, setting SOCK_RCU_FREE.
4. skb_steal_sock will now set refcounted = false due to
SOCK_RCU_FREE.
5. tcp_v4_rcv() skips sock_put().
Fix the problem by rejecting unhashed sockets in bpf_sk_assign().
This matches the behaviour of __inet_lookup_skb which is ultimately
the goal of bpf_sk_assign(). |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private
The normal process cannot go to ubifs_releasepage() which means there
exists pages being private but not dirty. Reproducer[1] shows that it
could occur (which maybe related to [2]) with following process:
PA PB PC
lock(page)[PA]
ubifs_write_end
attach_page_private // set Private
__set_page_dirty_nobuffers // set Dirty
unlock(page)
write_cache_pages[PA]
lock(page)
clear_page_dirty_for_io(page) // clear Dirty
ubifs_writepage
do_truncation[PB]
truncate_setsize
i_size_write(inode, newsize) // newsize = 0
i_size = i_size_read(inode) // i_size = 0
end_index = i_size >> PAGE_SHIFT
if (page->index > end_index)
goto out // jump
out:
unlock(page) // Private, Not Dirty
generic_fadvise[PC]
lock(page)
invalidate_inode_page
try_to_release_page
ubifs_releasepage
ubifs_assert(c, 0)
// bad assertion!
unlock(page)
truncate_pagecache[PB]
Then we may get following assertion failed:
UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]:
UBIFS assert failed: 0, in fs/ubifs/file.c:1513
UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]:
switched to read-only mode, error -22
CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308
Call Trace:
dump_stack+0x13/0x1b
ubifs_ro_mode+0x54/0x60 [ubifs]
ubifs_assert_failed+0x4b/0x80 [ubifs]
ubifs_releasepage+0x67/0x1d0 [ubifs]
try_to_release_page+0x57/0xe0
invalidate_inode_page+0xfb/0x130
__invalidate_mapping_pages+0xb9/0x280
invalidate_mapping_pagevec+0x12/0x20
generic_fadvise+0x303/0x3c0
ksys_fadvise64_64+0x4c/0xb0
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215373
[2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty |
