| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
| Issue summary: During processing of a crafted CMS EnvelopedData message
with KeyAgreeRecipientInfo a NULL pointer dereference can happen.
Impact summary: Applications that process attacker-controlled CMS data may
crash before authentication or cryptographic operations occur resulting in
Denial of Service.
When a CMS EnvelopedData message that uses KeyAgreeRecipientInfo is
processed, the optional parameters field of KeyEncryptionAlgorithmIdentifier
is examined without checking for its presence. This results in a NULL
pointer dereference if the field is missing.
Applications and services that call CMS_decrypt() on untrusted input
(e.g., S/MIME processing or CMS-based protocols) are vulnerable.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:dt2815_attach+0x6e0/0x1110
Add hardware detection by reading the status register before attempting
any write operations. If the read returns 0xff, assume no hardware is
present and fail the attach with -ENODEV. This prevents crashes from
outb() operations on non-existent hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - Add missing CRYPTO_ALG_ASYNC
The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its
asynchronous algorithms, causing the crypto API to select them for users
that request only synchronous algorithms. This causes crashes (at
least). Fix this by adding the flag like what the other drivers do.
Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just
get ignored and overridden by the registration function anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED. |
| Apache Log4j Core's XmlLayout https://logging.apache.org/log4j/2.x/manual/layouts.html#XmlLayout , in versions up to and including 2.25.3, fails to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets producing invalid XML output whenever a log message or MDC value contains such characters.
The impact depends on the StAX implementation in use:
* JRE built-in StAX: Forbidden characters are silently written to the output, producing malformed XML. Conforming parsers must reject such documents with a fatal error, which may cause downstream log-processing systems to drop the affected records.
* Alternative StAX implementations (e.g., Woodstox https://github.com/FasterXML/woodstox , a transitive dependency of the Jackson XML Dataformat module): An exception is thrown during the logging call, and the log event is never delivered to its intended appender, only to Log4j's internal status logger.
Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue by sanitizing forbidden characters before XML output. |
| The 3Com 3CRWER100-75 router with 1.2.10ww software, when enabling an optional virtual server, configures this server to accept all source IP addresses on the external (Internet) interface unless the user selects other options, which might expose the router to unintended incoming traffic from remote attackers, as demonstrated by setting up a virtual server on port 80, which allows remote attackers to access the web management interface. |
| The 3Com 3CRWER100-75 router with 1.2.10ww software, when remote management is disabled but a web server has been configured, serves a web page to external clients, which might allow remote attackers to obtain information about the router's existence and product details. |
| Cisco IOS 12.0(32)S12 through 12.0(32)S13 and 12.0(33)S3 through 12.0(33)S4, 12.0(32)SY8 through 12.0(32)SY9, 12.2(33)SXI1 through 12.2(33)SXI2, 12.2XNC before 12.2(33)XNC2, 12.2XND before 12.2(33)XND1, and 12.4(24)T1; and IOS XE 2.3 through 2.3.1t and 2.4 through 2.4.0; when RFC4893 BGP routing is enabled, allows remote attackers to cause a denial of service (device reload) by using an RFC4271 peer to send a malformed update, aka Bug ID CSCta33973. |
| Safari in Apple iPhone 1.1.1, when requested to disable Javascript, does not disable it until Safari is restarted, which might leave Safari open to attacks that the user does not expect. |
| The YaST2 LDAP module in yast2-ldap-server on SUSE Linux Enterprise Server 11 (aka SLE11) does not enable the firewall in certain circumstances involving reboots during online updates, which makes it easier for remote attackers to access network services. |
| Unspecified vulnerability in the HP System Administration Manager (SAM) on HP-UX B.11.11 and B.11.23, when used to configure NFS, might allow remote attackers to read or modify arbitrary files, related to an "empty systems list." |
| Unspecified vulnerability in "Solaris Auditing" in the Basic Security Module (BSM) in Sun Solaris 10, when configured for auditing of networking (nt) events, allows local users to cause a denial of service (panic) via unspecified vectors. |
| includes/bootstrap.inc in Drupal 5.x before 5.12 and 6.x before 6.6, when the server is configured for "IP-based virtual hosts," allows remote attackers to include and execute arbitrary files via the HTTP Host header. |
| The Nokia 6131 Near Field Communication (NFC) phone with 05.12 firmware automatically installs software upon completing the download of a JAR file, which makes it easier for remote attackers to execute arbitrary code via a crafted URI record in an NDEF tag. |
| Vidalia bundle before 0.1.2.18, when running on Windows, installs Privoxy with a configuration file (config.txt or config) that contains an insecure enable-remote-http-toggle setting, which allows remote attackers to bypass intended access restrictions and modify configuration. |
| dhcpd in ISC DHCP 3.0.4 and 3.1.1, when the dhcp-client-identifier and hardware ethernet configuration settings are both used, allows remote attackers to cause a denial of service (daemon crash) via unspecified requests. |
| The personality subsystem in the Linux kernel before 2.6.31-rc3 has a PER_CLEAR_ON_SETID setting that does not clear the ADDR_COMPAT_LAYOUT and MMAP_PAGE_ZERO flags when executing a setuid or setgid program, which makes it easier for local users to leverage the details of memory usage to (1) conduct NULL pointer dereference attacks, (2) bypass the mmap_min_addr protection mechanism, or (3) defeat address space layout randomization (ASLR). |
