| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/vrr: require valid min/max vfreq for VRR
Ensure the EDID provided min/max vfreq are valid. Most scenarios are
already covered (by coincidence) through the checks in
intel_vrr_is_capable() and intel_vrr_is_in_range(), but be more explicit
about it. At worst, a zero min_vfreq could lead to a division by zero in
intel_vrr_compute_vmax().
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
(cherry picked from commit 1765cf59f517b02f3b0591fe5120930d08bddeb6) |
| In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: userspace: fix use-after-free in get_local_id
In mptcp_pm_userspace_get_local_id(), the address entry is looked up under
spinlock, but its id is read after dropping the lock. A concurrent deletion
can free the entry between the unlock and the read, leading to UAF.
The race window is narrow. It was reproduced only with a locally
constructed stress test that repeatedly overlaps an MP_JOIN SYN with a
MPTCP_PM_CMD_SUBFLOW_DESTROY request.
However, the KASAN report below confirms that the race is reachable:
[ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0
...
[ 666.319401] Call Trace:
[ 666.319405] <IRQ>
[ 666.319408] dump_stack_lvl+0x53/0x70
[ 666.319412] print_address_description.constprop.0+0x2c/0x3b0
[ 666.319418] print_report+0xbe/0x2b0
[ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319423] kasan_report+0xce/0x100
[ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319433] mptcp_pm_get_local_id+0x371/0x440
...
[ 666.319821] Allocated by task 45539:
[ 666.319844] kasan_save_stack+0x33/0x60
[ 666.319855] kasan_save_track+0x14/0x30
[ 666.319858] __kasan_kmalloc+0x8f/0xa0
[ 666.319863] __kmalloc_noprof+0x1e7/0x520
[ 666.319867] sock_kmalloc+0xdf/0x130
[ 666.319885] sock_kmemdup+0x1b/0x40
[ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500
[ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610
...
[ 666.319967] Freed by task 45560:
[ 666.319988] kasan_save_stack+0x33/0x60
[ 666.319991] kasan_save_track+0x14/0x30
[ 666.319994] kasan_save_free_info+0x3b/0x60
[ 666.319998] __kasan_slab_free+0x43/0x70
[ 666.320000] kfree+0x166/0x440
[ 666.320003] sock_kfree_s+0x1d/0x50
[ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200
[ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0
Fix by copying the id into a local variable while still holding the lock,
and use -1 as a "not found" sentinel. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: serialize qdisc_rtab_list against concurrent get/put
qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly
linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no
lock. This was only safe because every caller historically held the RTNL
mutex, which serialized all rate-table lookups, inserts and frees.
That invariant no longer holds. cls_flower sets
TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false
for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through
tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() ->
tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the
RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each
adding a flower filter with a police action carrying the same rate, then
race on qdisc_rtab_list and on the non-atomic refcnt, leading to a
use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table.
qdisc_rtab_list is a single global (not per-netns), so the corrupted
object is shared system-wide.
BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160
qdisc_put_rtab+0x12f/0x160
tcf_police_init+0xda9/0x1590
tcf_action_init_1+0x460/0x6b0
tcf_action_init+0x439/0xa40
tcf_exts_validate_ex+0x42d/0x550
fl_change+0xddd/0x7da0
tc_new_tfilter+0xaa7/0x2420
rtnetlink_rcv_msg+0x95e/0xe90
which belongs to the cache kmalloc-2k of size 2048
Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The
(sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before
taking the lock; if a concurrent inserter added an identical table in the
meantime the freshly allocated one is freed under the lock, so no
duplicate is leaked. qdisc_put_rtab() now decrements the refcount and
unlinks under the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix recv-recv race of completed call
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: error out for zero quota goal target values
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: read virtqueues under worker locks
Commit bd50c5dc182b ("vsock/virtio: add support for device
suspend/resume") made the *_run flags transition from false to true when
restore installs replacement virtqueues. The RX, TX and event workers
read their virtqueue before locking and checking the corresponding flag,
so a worker delayed across freeze and restore can observe the replacement
queue's running state while retaining a pointer to the deleted queue.
Read each virtqueue under its mutex after checking the run flag, keeping
the pointer and state in the same queue generation. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent robust futex exit race some more
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ] |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: publish queues before arming timer
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Remove buffer from list prior to unmap operation
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: initialise dibs->lock in dibs_dev_alloc()
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix TOCTOU race between smc_listen_out() and listener close
smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race between update_event_fields and, event_define_fields
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: error out for >10000 active_mem_bp
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
