| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| gix-path is a crate of the gitoxide project dealing with git paths and their conversions. `gix-path` executes `git` to find the path of a configuration file that belongs to the `git` installation itself, but mistakenly treats the local repository's configuration as system-wide if no higher scoped configuration is found. In rare cases, this causes a less trusted repository to be treated as more trusted, or leaks sensitive information from one repository to another, such as sending credentials to another repository's remote. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` and parses the first line of the output to extract the path to the configuration file holding the configuration variable of highest scope. It is believed to be very difficult to exploit this vulnerability deliberately, due to the need either to anticipate a situation in which higher-scoped configuration variables would be absent, or to arrange for this to happen. Although any operating system may be affected, users running Apple Git on macOS are much less likely to be affected. This issue has been addressed in release version 0.10.10. All users are advised to upgrade. |
| Zenitel AlphaWeb XE v11.2.3.10 was discovered to contain a local file inclusion vulnerability via the component amc_uploads.php. |
| When zx is invoked with --prefer-local=<path>, the CLI creates a symlink named ./node_modules pointing to <path>/node_modules. Due to a logic error in src/cli.ts (linkNodeModules / cleanup), the function returns the target path instead of the alias (symlink path). The later cleanup routine removes what it received, which deletes the target directory itself. Result: zx can delete an external <path>/node_modules outside the current working directory. |
| SingularityCE and SingularityPRO are open source container platforms. Prior to SingularityCE 4.3.5 and SingularityPRO 4.1.11 and 4.3.5, if a user relies on LSM restrictions to prevent malicious operations then, under certain circumstances, an attacker can redirect the LSM label write operation so that it is ineffective. The attacker must cause the user to run a malicious container image that redirects the mount of /proc to the destination of a shared mount, either known to be configured on the target system, or that will be specified by the user when running the container. The attacker must also control the content of the shared mount, for example through another malicious container which also binds it, or as a user with relevant permissions on the host system it is bound from. This vulnerability is fixed in SingularityCE 4.3.5 and SingularityPRO 4.1.11 and 4.3.5. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. Prior to 3.3.3, if a request is made on an URI starting with //, coraza will set a wrong value in REQUEST_FILENAME. For example, if the URI //bar/uploads/foo.php?a=b is passed to coraza: , REQUEST_FILENAME will be set to /uploads/foo.php. This can lead to a rules bypass. This vulnerability is fixed in 3.3.3. |
| CommandKit is the discord.js meta-framework for building Discord bots. In versions 1.2.0-rc.1 through 1.2.0-rc.11, a logic flaw exists in the message command handler that affects how the commandName property is exposed to both middleware functions and command execution contexts when handling command aliases. When a message command is invoked using an alias, the ctx.commandName value reflects the alias rather than the canonical command name. This occurs in both middleware functions and within the command's own run function. Although not explicitly documented, CommandKit's examples and guidance around middleware usage implicitly convey that ctx.commandName represents the canonical command identifier. Middleware examples in the documentation consistently use ctx.commandName to reference the command being executed. Developers who assume ctx.commandName is canonical may introduce unintended behavior when relying on it for logic such as permission checks, rate limiting, or audit logging. This could allow unauthorized command execution or inaccurate access control decisions. Slash commands and context menu commands are not affected. This issue has been patched in version 1.2.0-rc.12, where ctx.commandName now consistently returns the actual canonical command name regardless of the alias used to invoke it. |
| An issue was discovered in the Bouncy Castle Crypto Package For Java before BC TLS Java 1.0.19 (ships with BC Java 1.78, BC Java (LTS) 2.73.6) and before BC FIPS TLS Java 1.0.19. When endpoint identification is enabled in the BCJSSE and an SSL socket is created without an explicit hostname (as happens with HttpsURLConnection), hostname verification could be performed against a DNS-resolved IP address in some situations, opening up a possibility of DNS poisoning. |
| OpenClaw before 2026.3.22 contains an allowlist bypass vulnerability in system.run approvals that fails to unwrap /usr/bin/time wrappers. Attackers can bypass executable binding restrictions by using an unregistered time wrapper to reuse approval state for inner commands. |
| The Qi Addons For Elementor plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.7.2 via the 'behavior' attributes found in the qi_addons_for_elementor_blog_list shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. Please note that this requires an attacker to create a non-existent directory or target an instance where file_exists won't return false with a non-existent directory in the path, in order to successfully exploit. |
| srvx is a universal server based on web standards. Prior to version 0.11.13, a pathname parsing discrepancy in srvx's `FastURL` allows middleware bypass on the Node.js adapter when a raw HTTP request uses an absolute URI with a non-standard scheme (e.g. `file://`). Starting in version 0.11.13, the `FastURL` constructor now deopts to native `URL` for any string not starting with `/`, ensuring consistent pathname resolution. |
| H3 is a minimal H(TTP) framework. In versions 2.0.0-0 through 2.0.1-rc.16, the `mount()` method in h3 uses a simple `startsWith()` check to determine whether incoming requests fall under a mounted sub-application's path prefix. Because this check does not verify a path segment boundary (i.e., that the next character after the base is `/` or end-of-string), middleware registered on a mount like `/admin` will also execute for unrelated routes such as `/admin-public`, `/administrator`, or `/adminstuff`. This allows an attacker to trigger context-setting middleware on paths it was never intended to cover, potentially polluting request context with unintended privilege flags. Version 2.0.2-rc.17 contains a patch. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 1.0 before 18.7.6, 18.8 before 18.8.6, and 18.9 before 18.9.2 that could have allowed an authenticated user to cause repository downloads to contain different code than displayed in the web interface due to incorrect validation of branch references under certain circumstances. |
| In the Linux kernel, the following vulnerability has been resolved:
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected,
cpu_max_bits_warn() generates a runtime warning similar as below when
showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<900000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace 8b484262b4b8c24c ]--- |
| Kentico before 12.0.50 allows file uploads in which the Content-Type header is inconsistent with the file extension, leading to XSS. |
| An arbitrary file rename vulnerability in the /admin/manager.php component of EasyImages 2.0 v2.8.6 and below allows attackers to execute arbitrary code via renaming a PHP file to a SVG format. |
| runc through 1.1.4 has Incorrect Access Control leading to Escalation of Privileges, related to libcontainer/rootfs_linux.go. To exploit this, an attacker must be able to spawn two containers with custom volume-mount configurations, and be able to run custom images. NOTE: this issue exists because of a CVE-2019-19921 regression. |
| Apptainer is an open source container platform. In Apptainer versions less than 1.4.5, a container can disable two of the forms of the little used --security option, in particular the forms --security=apparmor:<profile> and --security=selinux:<label> which otherwise put restrictions on operations that containers can do. The --security option has always been mentioned in Apptainer documentation as being a feature for the root user, although these forms do also work for unprivileged users on systems where the corresponding feature is enabled. Apparmor is enabled by default on Debian-based distributions and SElinux is enabled by default on RHEL-based distributions, but on SUSE it depends on the distribution version. This vulnerability is fixed in 1.4.5. |
| A remote code execution vulnerability in MobileIron Core & Connector versions 10.3.0.3 and earlier, 10.4.0.0, 10.4.0.1, 10.4.0.2, 10.4.0.3, 10.5.1.0, 10.5.2.0 and 10.6.0.0; and Sentry versions 9.7.2 and earlier, and 9.8.0; and Monitor and Reporting Database (RDB) version 2.0.0.1 and earlier that allows remote attackers to execute arbitrary code via unspecified vectors. |
| Zoho ManageEngine ADSelfService Plus version 6113 and prior is vulnerable to REST API authentication bypass with resultant remote code execution. |
| Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads
- attacker knowledge of the names of security sensitive files being uploaded
- the security sensitive files also being uploaded via partial PUT
If all of the following were true, a malicious user was able to perform remote code execution:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- application was using Tomcat's file based session persistence with the default storage location
- application included a library that may be leveraged in a deserialization attack
Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue. |
