| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/lbr: Fix kernel address leakage
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET
entries for which the branch-from addresses are in the kernel.
E.g.
$ perf record -e cycles -o - -j any,save_type,u -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
...
0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
...
The reason is that the hardware filter only considers the privilege
level applicable to the branch target. Extend software filtering to
also validate the branch-from addresses against br_sel, so that any
branch record whose branch-from address is in the kernel is dropped
when PERF_SAMPLE_BRANCH_USER is requested. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it contains an ASCII digit, simple_strtoul
will consume it and produce a wrong DCC IP or port in the conntrack
expectation. The extra allocation byte is also a fragile guard: if the
cap or allocation size changes, this becomes a real out-of-bounds read.
Change the loop and its post-loop check to use strict less-than,
consistent with the caller's exclusive-end convention. Update the
function comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix potential divide-by-zero when num_vsi is zero
For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so
pf->caps.num_vsi is zero. This leads to a divide-by-zero in
enetc4_default_rings_allocation() when distributing rings among PF and
VFs.
Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV
instructions silently return zero rather than raising an exception, so
the issue does not cause a visible crash. However, relying on this
behavior is incorrect and poses a cross-platform compatibility risk.
Add an explicit check for num_vsi == 0 and return early after the PF's
rings have been configured. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting a warning
if it is not.
Fix this by annotating acpi_idle_lpi_enter(), the generic __weak
stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter()
with __cpuidle. This moves these functions into the '.cpuidle.text'
section, implicitly disabling ftrace instrumentation (notrace) along
this sensitive path and preventing trace-induced RCU warnings during
idle entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix foe_check_time allocation size
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix potential UAF in aa_replace_profiles
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: gc2235: fix UAF and memory leak
gc2235_probe() handles its error paths incorrectly.
If media_entity_pads_init() fails, gc2235_remove() is called, which
tears down the subdev and frees dev, but then still falls through to
atomisp_register_i2c_module(). This results in use-after-free.
If atomisp_register_i2c_module() fails, the media entity and control
handler are left initialized and dev is leaked.
gc2235_remove() unconditionally calls media_entity_cleanup() and
v4l2_ctrl_handler_free(), but these are not initialized at every
error path in gc2235_probe().
Replace gc2235_remove() calls in the probe error paths with explicit
unwind labels that free only the resources initialized at each point
of failure, in reverse order of initialization. |
| An attacker that has valid credentials can use a Sieve script with the editheader extension to trigger a use-after-free in the mail editing code, and to write memory contents beyond the intended buffer into the delivered mail. This causes memory leak and opportunity to do memory corruption during mail delivery, which can crash the delivery process and may allow execution of arbitrary code in the context of that process. Disable the Sieve editheader extension. Update to non-vulnerable version. No publicly available exploits are known. |
| A host listed as a trusted proxy can send forwarding information containing a NUL byte, which crashes the login process on the following login attempt. The login process is terminated, which can cause degradation or denial of service for logins. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known. |
| A flaw was found in gdk-pixbuf. When loading a specially crafted JPEG image containing chunked ICC profile markers, an error during ICC profile parsing can leave stale size metadata after the profile buffer is freed. A subsequent allocation in the same decode can cause an out-of-bounds write, potentially crashing the application. To exploit this flaw, an application using gdk-pixbuf must process the malicious JPEG image.
Affected version >= 2.26.4 |
| An OS command injection vulnerability in the killSessionSync function (lib/agent-runtime.ts) of 23blocks-OS ai-maestro v0.24.17 allows attackers to execute arbitrary commands via a crafted input. |
| An issue in the JsonSanitizer.sanitize() component of OWASP json-sanitizer v1.2.3 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Incorrect authorization in Core in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| A flaw was found in the file-ico plugin in GIMP. When processing a specially crafted ICO image file, the plugin does not properly validate the used_clrs (palette count) parameter. This incorrect validation leads to improper memory bounds checking, resulting in a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents. |
| A flaw was found in libsolv, a dependency-resolution library used by RPM-based package managers such as dnf and zypper to work with .solv repository cache files. When libsolv rewrites a .solv cache file, it reads directory-id values from the file's compressed filelist data without validating that they fall within the expected range. A corrupted or specially crafted .solv cache file (for example, one left in a torn state after an unclean system shutdown) can cause an out-of-bounds memory write when a tool such as dnf, yum, or zypper next processes it. Successful exploitation is expected to result in a crash of the affected tool (denial of service); it is not expected to allow arbitrary code execution because the out-of-bounds write always stores a fixed, non-attacker-controlled value. |
| Externally controlled reference in QUIC in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Improper input validation in StorageAccessAPI in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Artifex Ghostscript before 10.01.2 mishandles permission validation for pipe devices (with the %pipe% prefix or the | pipe character prefix). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability
dwc_pcie_rasdes_debugfs_init() returns success when the controller has no
RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common
debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which
dereferences rasdes_info unconditionally.
Return early when no RAS DES state was allocated. In that case no RAS DES
mutex was initialized, so there is nothing to destroy.
[mani: reworded subject] |
| In the Linux kernel, the following vulnerability has been resolved:
char: tlclk: fix use-after-free in tlclk_cleanup()
This patch improves the module cleanup process in the tlclk driver to
prevent potential use-after-free and race conditions.
Currently, the file_operations structure does not specify the .owner
field, which could allow the module to be unloaded while user-space
processes are still interacting with the device. Additionally, the
tlclk_cleanup() function frees the alarm_events memory before ensuring
that blocked processes in the waitqueue are fully awakened and that the
switchover_timer has completed.
To address these cases, this patch:
- Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module
unloading while the device is in use.
- Updates tlclk_cleanup() to explicitly wake up all blocked readers
(wake_up_all), properly release hardware I/O regions, and safely
delete the timer (timer_delete_sync) prior to freeing memory. |
