| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC active reference counts
HEVC slice parameters are shared stateless V4L2 controls, but the common
validation path does not verify the active L0/L1 reference counts before
driver-specific code consumes them.
The original report came from Cedrus, but the active count bounds are
not Cedrus-specific. Validate them in the common HEVC slice control path
so stateless HEVC drivers get the same basic guarantees as soon as the
control is queued.
Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may
use out-of-range sentinel values such as 0xff for missing references, and
some hardware can use that information for concealment. Keep this common
check limited to the active reference counts. |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7134: Fix a possible memory leak in saa7134_video_init1
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal cleanup path in
saa7134_finidev() is not executed, leading to memory leaks and
potential use of uninitialized DMA resources.
Check the return value of both saa7134_pgtable_alloc() calls and
propagate errors. On failure of any later step, free allocated page
tables to avoid memory leaks. Ensure control handlers are also
released on error to prevent further resource leakage.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-si476x: Unregister v4l2_device on probe failure
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pwc: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
pwc's start_streaming() had two early returns that hit this trap:
-ENODEV when the USB device was already disconnected, and -ERESTARTSYS
when mutex_lock_interruptible() was interrupted by a signal. Call the
existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED
before returning (matching the state already used by the
pwc_isoc_init() error path in the same function).
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: pci: dm1105: Free allocated workqueue
Destroy allocated workqueue in remove() callback to free its resources,
thus fixing memory leak. |
| Attacker-controlled CSV samples can trigger super-linear
regular-expression work during dialect sniffing and consume significant
CPU when applications pass unbounded input to csv.Sniffer.sniff(). |
| If `shutil.unpack_archive()` is given a ZIP archive with an absolute Windows path containing a drive (`C:\\...`) then the archive will be extracted outside the target directory which is different than other operating systems. Only Windows is affected by this vulnerability. |
| In affected versions of MISP cti-transmute, the conversion-history details endpoint performs an incomplete authorization check. When a history record references a deleted conversion, the associated conversion lookup returns None. The previous logic only denied access when the conversion object existed and the visibility check failed. As a result, deleted conversions bypassed the authorization check and their retained history input/output could be disclosed to a user able to request the corresponding history entry. The July 22, 2026 commit changes the logic to deny access whenever the conversion is missing or the requester lacks permission |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix recursive locking deadlock in audit_dupe_exe()
A deadlock occurs in the audit subsystem when duplicating
executable-related rules.
When a file is moved (e.g., via do_renameat2()), the VFS layer locks
the parent directory (I_MUTEX_PARENT), which synchronously triggers an
fsnotify_move event. If an existing executable audit rule matches the
file being moved, the audit subsystem catches this event and calls
audit_dupe_exe() to duplicate the watch and update the rule. Then,
audit_alloc_mark() would call kern_path_parent() to resolve the path,
leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock
already held by the task, resulting in the following recursive locking
deadlock:
============================================
WARNING: possible recursive locking detected
6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted
--------------------------------------------
mv/5099 is trying to acquire lock:
ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: __kern_path_locked+0x10a/0x2f0
but task is already holding lock:
ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: lock_two_directories+0x13f/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by mv/5099:
#0: ffff888112a9c440 (sb_writers#13)
at: do_renameat2+0x34c/0xbc0
#1: ffff888112a9c790 (&type->s_vfs_rename_key#3)
at: do_renameat2+0x415/0xbc0
#2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1)
at: lock_two_directories+0x13f/0x2b0
#3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5)
at: lock_two_directories+0x175/0x2b0
#4: ffffffffb3a1fb10 (&fsnotify_mark_srcu)
at: fsnotify+0x454/0x28a0
#5: ffffffffaf886230 (audit_filter_mutex)
at: audit_update_watch+0x36/0x11e0
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_deadlock_bug.cold+0xbd/0xca
validate_chain+0x83a/0xf00
__lock_acquire+0xcac/0x1d20
lock_acquire.part.0+0x11b/0x360
down_write_nested+0x9f/0x230
__kern_path_locked+0x10a/0x2f0
kern_path_locked+0x26/0x40
audit_alloc_mark+0xfb/0x4f0
audit_dupe_exe+0x6c/0xe0
audit_dupe_rule+0x6c2/0xc00
audit_update_watch+0x4cc/0x11e0
audit_watch_handle_event+0x12c/0x1b0
send_to_group+0x5d0/0x8b0
fsnotify+0x615/0x28a0
fsnotify_move+0x1d8/0x630
vfs_rename+0xdcd/0x1df0
do_renameat2+0x9d4/0xbc0
__x64_sys_renameat+0x192/0x260
do_syscall_64+0x92/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0491fe8c4e
Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff
c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48>
3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89
RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e
RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a
R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c
</TASK>
The aforementioned deadlock can be consistently reproduced by running
the script below:
audit-dupe-exe-deadlock.sh
--------------------------
#!/bin/bash
auditctl -D
mkdir -p /tmp/foo
touch /tmp/file
auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr
mv /tmp/file /tmp/foo/file
rm -Rf /tmp/foo
This patch fixes the issue by introducing struct audit_watch_ctx to pass
the fsnotify event context down to audit_alloc_mark(). By utilizing the
already-resolved directory inode provided by the event, we bypass the
kern_path_parent() path resol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix check in amdgpu_hmm_invalidate_gfx
For a short moment during alloc/free the userptr BO is not part of his VM,
so bo->vm_bo can be NULL.
Keep a reference to the VM root PD as parent of the userptr BO so that
we can always use that to wait for all submissions of the VM instead of
only the one involving the userptr BO.
(cherry picked from commit 631849ff5d603841e74f19f4a5e30fe1f7d7cf30) |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix double aggregation of flush-marked skbs
Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO
packet.") added a flush check to skb_gro_receive(), but
skb_gro_receive_list() lacks the same validation.
As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be
re-aggregated.
This allows already-GRO'd packets with existing frag_list to be
re-aggregated into a new GRO session, corrupting the frag_list chain
structure. When skb_segment() attempts to unpack these malformed packets,
it encounters invalid state and triggers a kernel panic.
Scenario (Tethering/Device forwarding):
1. Driver: Generated aggregated packet P1 via LRO with frag_list
2. Dev A: Receives aggregated fraglist packet and flush flag set
3. Dev A: Re-enters GRO, skb_gro_receive_list() is called
4. Missing flush check allows re-aggregation despite flush flag
5. Frag_list chain becomes corrupted (loops or dangling refs)
6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list
Root cause in skb_segment():
The check at line ~4891:
if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) &&
(skb_headlen(list_skb) == len || sg)) {
When frag_list is corrupted by double aggregation, when list_skb is
a NULL pointer from skb->next, skb_headlen(list_skb) dereference
NULL/corrupted pointers occurs.
Call Trace:
skb_headlen(NULL skb)
skb_segment
tcp_gso_segment
tcp4_gso_segment
inet_gso_segment
skb_mac_gso_segment
__skb_gso_segment
skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
qdisc_restart
__qdisc_run
qdisc_run
net_tx_action
Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in
skb_gro_receive_list(), matching the defensive programming pattern of
skb_gro_receive(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free in x25_kill_by_neigh()
x25_kill_by_neigh() walks the global X.25 socket list looking for sockets
attached to a terminating neighbour. x25_list_lock protects list membership
while the lookup is in progress, but it does not pin a socket's lifetime
after the lock is dropped.
The function currently drops x25_list_lock before calling lock_sock(s). A
concurrent close can run x25_release(), remove the same socket from
x25_list, and drop the last socket reference in that window. The neighbour
teardown path can then lock or inspect a freed struct sock/struct x25_sock.
Take sock_hold(s) while x25_list_lock still proves that the list entry is
live, then drop the temporary reference after the socket has been locked,
rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(),
because another path may have disconnected the socket before this path
acquired the socket lock. Restart the list walk after each disconnect
because the list lock was dropped and the previous iterator state may no
longer be valid.
A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in
x25_kill_by_neigh(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: serialize qdisc_rtab_list against concurrent get/put
qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly
linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no
lock. This was only safe because every caller historically held the RTNL
mutex, which serialized all rate-table lookups, inserts and frees.
That invariant no longer holds. cls_flower sets
TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false
for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through
tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() ->
tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the
RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each
adding a flower filter with a police action carrying the same rate, then
race on qdisc_rtab_list and on the non-atomic refcnt, leading to a
use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table.
qdisc_rtab_list is a single global (not per-netns), so the corrupted
object is shared system-wide.
BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160
qdisc_put_rtab+0x12f/0x160
tcf_police_init+0xda9/0x1590
tcf_action_init_1+0x460/0x6b0
tcf_action_init+0x439/0xa40
tcf_exts_validate_ex+0x42d/0x550
fl_change+0xddd/0x7da0
tc_new_tfilter+0xaa7/0x2420
rtnetlink_rcv_msg+0x95e/0xe90
which belongs to the cache kmalloc-2k of size 2048
Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The
(sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before
taking the lock; if a concurrent inserter added an identical table in the
meantime the freshly allocated one is freed under the lock, so no
duplicate is leaked. qdisc_put_rtab() now decrements the refcount and
unlinks under the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix use-after-free of a severed iucv_path
af_iucv queues not-yet-received message notifications on iucv->message_q,
each holding a raw pointer to the connection's iucv_path. When the peer
severs the connection, iucv_sever_path() frees that path with
iucv_path_free() but leaves the notifications queued. A later recvmsg()
drains message_q via iucv_process_message_q() and hands the stale path to
message_receive() -- a use-after-free of the freed iucv_path.
Drop the queued notifications when the path is severed; once the path is
gone they can no longer be received. This also frees the notifications
leaked when a socket is closed with messages still queued. |
| In the Linux kernel, the following vulnerability has been resolved:
net/af_iucv: fix NULL deref in afiucv_hs_callback_syn()
afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC.
If the allocation fails, nsk is NULL.
The connection-refused path is entered when the listen state check
fails, the accept backlog is full, or nsk is NULL. The code
unconditionally calls iucv_sock_kill(nsk) in that path.
iucv_sock_kill() does not accept a NULL socket pointer and immediately
dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL,
calling iucv_sock_kill(nsk) results in a NULL pointer dereference.
Only call iucv_sock_kill() when a child socket was successfully
allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
net: slip: serialize receive against buffer reallocation
sl_realloc_bufs() replaces rbuff and updates buffsize while holding
sl->lock. slip_receive_buf() reads those fields and writes through rbuff
without holding the lock.
An MTU change can therefore race with receive processing. An MTU shrink
can expose the new smaller rbuff with the old larger bound, causing an
out-of-bounds write. A receive callback which already loaded the old
rbuff can instead continue writing after that buffer has been freed.
Serialize receive processing with sl_realloc_bufs() by holding sl->lock
while consuming each receive batch. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: Avoid dynamic allocation in fscrypt_get_devices()
When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls
fscrypt_get_devices() to get the filesystem's list of block devices,
then iterates over them and calls blk_crypto_config_supported(),
blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one.
Currently, the block device pointers are placed in a dynamically
allocated array. This dynamic allocation is problematic because:
- It can fail, especially at the fscrypt_destroy_inline_crypt_key() call
site when it's invoked for inode eviction under direct reclaim.
- fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It
just zeroizes and frees the blk_crypto_key without calling
blk_crypto_evict_key(). That causes a use-after-free.
For now, let's fix this in the straightforward and easily-backportable
way by switching to an on-stack array. Currently the fscrypt
multi-device functionality is used only by f2fs, which has a hardcoded
limit of 8 block devices. An on-stack array works fine for that.
(Of course, this solution won't scale up to large number of block
devices. For that we'd need a different solution, like moving the block
device iteration into the filesystem. Or in the case of btrfs, which
will only support blk-crypto-fallback, we should make it just call
blk-crypto-fallback directly, so the block devices won't be needed.) |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
amt: fix use-after-free in AMT delayed works
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reject zero bucket types in crush_decode
CRUSH bucket type 0 is reserved for devices. The mapper relies on
that invariant and uses type 0 to identify leaf devices.
If crush_decode() accepts a bucket with type 0, a malformed CRUSH map
can make the mapper treat a negative bucket ID as a device and pass it
to is_out(), which then indexes the OSD weight array with a negative
value.
Reject zero bucket types while decoding the CRUSH map so the invalid
state never reaches the mapper. |
