| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The web application fails to enforce an upper bound to the cost factor of the PBKDF2 derived key during the creation or update of an account. An attacker with the user profile access privilege could cause a denial of service (DoS) condition through CPU consumption by setting a PBKDF2 derived key with a remarkably high cost effort and then attempting a login to the so-modified account. |
| In Apache ActiveMQ Artemis prior to 2.20.0 or 2.19.1, an attacker could partially disrupt availability (DoS) through uncontrolled resource consumption of memory. |
| PingID Windows Login prior to 2.8 is vulnerable to a denial of service condition on local machines when combined with using offline security keys as part of authentication. |
| Shenzhen Hichip Vision Technology IP Camera Firmware V11.4.8.1.1-20170926 has a denial of service vulnerability through sending a crafted multicast message in a local network. |
| A design flaw in all versions of Go-Ethereum allows an attacker node to send 5120 pending transactions of a high gas price from one account that all fully spend the full balance of the account to a victim Geth node, which can purge all of pending transactions in a victim node's memory pool and then occupy the memory pool to prevent new transactions from entering the pool, resulting in a denial of service (DoS). |
| TeamViewer Linux versions before 15.28 do not properly execute a deletion command for the connection password in case of a process crash. Knowledge of the crash event and the TeamViewer ID as well as either possession of the pre-crash connection password or local authenticated access to the machine would have allowed to establish a remote connection by reusing the not properly deleted connection password. |
| Dell PowerScale OneFS, 8.2.2 - 9.3.0.x, contain a missing release of memory after effective lifetime vulnerability. An authenticated user with ISI_PRIV_LOGIN_SSH and/or ISI_PRIV_LOGIN_CONSOLE and ISI_PRIV_AUTH_PROVIDERS privileges could exploit this vulnerability, leading to a Denial-Of-Service. This can also impact a cluster in Compliance mode. Dell recommends to update at the earliest opportunity. |
| arm: guest_physmap_remove_page not removing the p2m mappings The functions to remove one or more entries from a guest p2m pagetable on Arm (p2m_remove_mapping, guest_physmap_remove_page, and p2m_set_entry with mfn set to INVALID_MFN) do not actually clear the pagetable entry if the entry doesn't have the valid bit set. It is possible to have a valid pagetable entry without the valid bit set when a guest operating system uses set/way cache maintenance instructions. For instance, a guest issuing a set/way cache maintenance instruction, then calling the XENMEM_decrease_reservation hypercall to give back memory pages to Xen, might be able to retain access to those pages even after Xen started reusing them for other purposes. |
| On version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.5, and all versions of 13.1.x, when the BIG-IP Virtual Edition (VE) uses the ixlv driver (which is used in SR-IOV mode and requires Intel X710/XL710/XXV710 family of network adapters on the Hypervisor) and TCP Segmentation Offload configuration is enabled, undisclosed requests may cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| On BIG-IP AFM version 16.x before 16.1.0, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.2, and all versions of 13.1.x, when the IPsec application layer gateway (ALG) logging profile is configured on an IPsec ALG virtual server, undisclosed IPsec traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| On BIG-IP version 16.1.x before 16.1.2.1, 15.1.x before 15.1.5, 14.1.x before 14.1.4.5, and all versions of 13.1.x and 12.1.x, and BIG-IQ all versions of 8.x and 7.x, undisclosed requests by an authenticated iControl REST user can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| On BIG-IP versions 16.x before 16.1.0, 15.1.x before 15.1.4.1, and 14.1.2.6-14.1.4.4, when a Client SSL profile is configured on a virtual server with Client Certificate Authentication set to request/require and Session Ticket enabled and configured, processing SSL traffic can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| On BIG-IP versions 16.x before 16.1.0, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.4, and all versions of 13.1.x, 12.1.x, and 11.6.x, when a FastL4 profile and an HTTP profile are configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| The Zoom Client for Meetings chat functionality was susceptible to Zip bombing attacks in the following product versions: Android before version 5.8.6, iOS before version 5.9.0, Linux before version 5.8.6, macOS before version 5.7.3, and Windows before version 5.6.3. This could lead to availability issues on the client host by exhausting system resources. |
| A CWE-400: Uncontrolled Resource Consumption vulnerability exists that could cause a denial of service on ports 80 (HTTP) and 502 (Modbus), when sending a large number of TCP RST or FIN packets to any open TCP port of the PLC. Affected Product: Modicon M340 CPUs: BMXP34 (All Versions) |
| Dell PowerStore contains an Uncontrolled Resource Consumption Vulnerability in PowerStore User Interface. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the Denial of Service. |
| SAP NetWeaver Application Server for ABAP (Kernel) and ABAP Platform (Kernel) - versions KERNEL 7.22, 8.04, 7.49, 7.53, 7.77, 7.81, 7.85, 7.86, 7.87, KRNL64UC 8.04, 7.22, 7.22EXT, 7.49, 7.53, KRNL64NUC 7.22, 7.22EXT, 7.49, does not sufficiently validate sap-passport information, which could lead to a Denial-of-Service attack. This allows an unauthorized remote user to provoke a breakdown of the SAP Web Dispatcher or Kernel work process. The crashed process can be restarted immediately, other processes are not affected. |
| IBM Sterling External Authentication Server and IBM Sterling Secure Proxy 6.0.3.0, 6.0.2.0, and 3.4.3.2 could allow a remote user to consume resources causing a denial of service due to a resource leak. IBM X-Force ID: 219395. |
| Improper Restriction of TCP Communication Channel in HTTP/S inbound traffic from WAN to DMZ bypassing security policy until TCP handshake potentially resulting in Denial of Service (DoS) attack if a target host is vulnerable. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos platforms, the Kernel Routing Table (KRT) queue can get stuck due to a memory leak triggered by interface flaps or route churn leading to RIB and PFEs getting out of sync. The memory leak causes RTNEXTHOP/route and next-hop memory pressure issue and the KRT queue will eventually get stuck with the error- 'ENOMEM -- Cannot allocate memory'. The out-of-sync state between RIB and FIB can be seen with the "show route" and "show route forwarding-table" command. This issue will lead to failures for adding new routes. The KRT queue status can be checked using the CLI command "show krt queue": user@host > show krt state High-priority add queue: 1 queued ADD nhtype Router index 0 (31212) error 'ENOMEM -- Cannot allocate memory' kqp '0x8ad5e40' The following messages will be observed in /var/log/messages, which indicate high memory for routes/nexthops: host rpd[16279]: RPD_RT_HWM_NOTICE: New RIB highwatermark for routes: 266 [2022-03-04 05:06:07] host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host kernel: rts_veto_net_delayed_unref_limit: Route/nexthop memory is severe pressure. User Application to perform recovery actions. O p 8 err 12, rtsm_id 0:-1, msg type 10, veto simulation: 0. host kernel: rts_veto_net_delayed_unref_limit: Memory usage of M_RTNEXTHOP type = (806321208) Max size possible for M_RTNEXTHOP type = (689432176) Current delayed unref = (0), Max delayed unref on this platform = (120000) Current delayed weight unref = (0) Max delayed weight unref on this platform = (400000) curproc = rpd. This issue affects: Juniper Networks Junos OS 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2-S1, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 21.2R1. |
