| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 8.0.40 and prior, 8.4.3 and prior and 9.1.0 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 8.0.40 and prior, 8.4.3 and prior and 9.1.0 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: imx8m: Probe the SoC driver as platform driver
With driver_async_probe=* on kernel command line, the following trace is
produced because on i.MX8M Plus hardware because the soc-imx8m.c driver
calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock
driver is not yet probed. This was not detected during regular testing
without driver_async_probe.
Convert the SoC code to platform driver and instantiate a platform device
in its current device_initcall() to probe the platform driver. Rework
.soc_revision callback to always return valid error code and return SoC
revision via parameter. This way, if anything in the .soc_revision callback
return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get
retried later.
"
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603
Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : imx8mm_soc_revision+0xdc/0x180
lr : imx8mm_soc_revision+0xd0/0x180
sp : ffff8000821fbcc0
x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120
x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311
x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb
x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff
x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8
x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801
x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c
x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3
x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb
Call trace:
imx8mm_soc_revision+0xdc/0x180
imx8_soc_init+0xb0/0x1e0
do_one_initcall+0x94/0x1a8
kernel_init_freeable+0x240/0x2a8
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
SoC: i.MX8MP revision 1.1
" |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - Fix the pointer passed to caam_qi_shutdown()
The type of the last parameter given to devm_add_action_or_reset() is
"struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to
"struct device *".
Pass the correct parameter to devm_add_action_or_reset() so that the
resources are released as expected. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c
Add error pointer check after calling otx2_mbox_get_rsp(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c
Add error pointer check after calling otx2_mbox_get_rsp(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix cpu stuck caused by printings during reset
During reset, cmd to destroy resources such as qp, cq, and mr may fail,
and error logs will be printed. When a large number of resources are
destroyed, there will be lots of printings, and it may lead to a cpu
stuck.
Delete some unnecessary printings and replace other printing functions
in these paths with the ratelimited version. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] <TASK>
[ 160.881477] ? __die+0x20/0x60
[ 160.884586] ? page_fault_oops+0x15a/0x450
[ 160.888746] ? search_extable+0x22/0x30
[ 160.892647] ? search_bpf_extables+0x5f/0x80
[ 160.896988] ? exc_page_fault+0xa9/0x140
[ 160.900973] ? asm_exc_page_fault+0x22/0x30
[ 160.905232] ? dev_map_free+0x77/0x170
[ 160.909043] ? dev_map_free+0x58/0x170
[ 160.912857] bpf_map_free_deferred+0x51/0x90
[ 160.917196] process_one_work+0x142/0x370
[ 160.921272] worker_thread+0x29e/0x3b0
[ 160.925082] ? rescuer_thread+0x4b0/0x4b0
[ 160.929157] kthread+0xd4/0x110
[ 160.932355] ? kthread_park+0x80/0x80
[ 160.936079] ret_from_fork+0x2d/0x50
[ 160.943396] ? kthread_park+0x80/0x80
[ 160.950803] ret_from_fork_asm+0x11/0x20
[ 160.958482] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
"
In the xsk_map_delete_elem function an unsigned integer
(map->max_entries) is compared with a user-controlled signed integer
(k). Due to implicit type conversion, a large unsigned value for
map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries)
return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2),
which is then used as an array index in m->xsk_map[k], which results
in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry
old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write
if (old_xs)
xsk_map_sock_delete(old_xs, map_entry);
spin_unlock_bh(&m->lock);
The xchg operation can then be used to cause an out-of-bounds write.
Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead
to further memory corruption.
"
It indeed results in following splat:
[76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108
[76612.904330] #PF: supervisor write access in kernel mode
[76612.909639] #PF: error_code(0x0002) - not-present page
[76612.914855] PGD 0 P4D 0
[76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP
[76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470
[76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60
[76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31
[76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246
[76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000
[76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000
[76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007
[76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8
[76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0
[76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000
[76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0
[76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[76613.041086] PKRU: 55555554
[76613.043842] Call Trace:
[76613.046331] <TASK>
[76613.048468] ? __die+0x20/0x60
[76613.051581] ? page_fault_oops+0x15a/0x450
[76613.055747] ? search_extable+0x22/0x30
[76613.059649] ? search_bpf_extables+0x5f/0x80
[76613.063988] ? exc_page_fault+0xa9/0x140
[76613.067975] ? asm_exc_page_fault+0x22/0x30
[76613.072229] ? xsk_map_delete_elem+0x2d/0x60
[76613.076573] ? xsk_map_delete_elem+0x23/0x60
[76613.080914] __sys_bpf+0x19b7/0x23c0
[76613.084555] __x64_sys_bpf+0x1a/0x20
[76613.088194] do_syscall_64+0x37/0xb0
[76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[76613.096962] RIP: 0033:0x7f80b6d1e88d
[76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48
[76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141
[76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d
[76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003
[76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000
[76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8
[76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: don't query the device logical block size multiple times
Devices block sizes may change. One of these cases is a loop device by
using ioctl LOOP_SET_BLOCK_SIZE.
While this may cause other issues like IO being rejected, in the case of
hfsplus, it will allocate a block by using that size and potentially write
out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the
latter function reads a different io_size.
Using a new min_io_size initally set to sb_min_blocksize works for the
purposes of the original fix, since it will be set to the max between
HFSPLUS_SECTOR_SIZE and the first seen logical block size. We still use the
max between HFSPLUS_SECTOR_SIZE and min_io_size in case the latter is not
initialized.
Tested by mounting an hfsplus filesystem with loop block sizes 512, 1024
and 4096.
The produced KASAN report before the fix looks like this:
[ 419.944641] ==================================================================
[ 419.945655] BUG: KASAN: slab-use-after-free in hfsplus_read_wrapper+0x659/0xa0a
[ 419.946703] Read of size 2 at addr ffff88800721fc00 by task repro/10678
[ 419.947612]
[ 419.947846] CPU: 0 UID: 0 PID: 10678 Comm: repro Not tainted 6.12.0-rc5-00008-gdf56e0f2f3ca #84
[ 419.949007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 419.950035] Call Trace:
[ 419.950384] <TASK>
[ 419.950676] dump_stack_lvl+0x57/0x78
[ 419.951212] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.951830] print_report+0x14c/0x49e
[ 419.952361] ? __virt_addr_valid+0x267/0x278
[ 419.952979] ? kmem_cache_debug_flags+0xc/0x1d
[ 419.953561] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.954231] kasan_report+0x89/0xb0
[ 419.954748] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.955367] hfsplus_read_wrapper+0x659/0xa0a
[ 419.955948] ? __pfx_hfsplus_read_wrapper+0x10/0x10
[ 419.956618] ? do_raw_spin_unlock+0x59/0x1a9
[ 419.957214] ? _raw_spin_unlock+0x1a/0x2e
[ 419.957772] hfsplus_fill_super+0x348/0x1590
[ 419.958355] ? hlock_class+0x4c/0x109
[ 419.958867] ? __pfx_hfsplus_fill_super+0x10/0x10
[ 419.959499] ? __pfx_string+0x10/0x10
[ 419.960006] ? lock_acquire+0x3e2/0x454
[ 419.960532] ? bdev_name.constprop.0+0xce/0x243
[ 419.961129] ? __pfx_bdev_name.constprop.0+0x10/0x10
[ 419.961799] ? pointer+0x3f0/0x62f
[ 419.962277] ? __pfx_pointer+0x10/0x10
[ 419.962761] ? vsnprintf+0x6c4/0xfba
[ 419.963178] ? __pfx_vsnprintf+0x10/0x10
[ 419.963621] ? setup_bdev_super+0x376/0x3b3
[ 419.964029] ? snprintf+0x9d/0xd2
[ 419.964344] ? __pfx_snprintf+0x10/0x10
[ 419.964675] ? lock_acquired+0x45c/0x5e9
[ 419.965016] ? set_blocksize+0x139/0x1c1
[ 419.965381] ? sb_set_blocksize+0x6d/0xae
[ 419.965742] ? __pfx_hfsplus_fill_super+0x10/0x10
[ 419.966179] mount_bdev+0x12f/0x1bf
[ 419.966512] ? __pfx_mount_bdev+0x10/0x10
[ 419.966886] ? vfs_parse_fs_string+0xce/0x111
[ 419.967293] ? __pfx_vfs_parse_fs_string+0x10/0x10
[ 419.967702] ? __pfx_hfsplus_mount+0x10/0x10
[ 419.968073] legacy_get_tree+0x104/0x178
[ 419.968414] vfs_get_tree+0x86/0x296
[ 419.968751] path_mount+0xba3/0xd0b
[ 419.969157] ? __pfx_path_mount+0x10/0x10
[ 419.969594] ? kmem_cache_free+0x1e2/0x260
[ 419.970311] do_mount+0x99/0xe0
[ 419.970630] ? __pfx_do_mount+0x10/0x10
[ 419.971008] __do_sys_mount+0x199/0x1c9
[ 419.971397] do_syscall_64+0xd0/0x135
[ 419.971761] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 419.972233] RIP: 0033:0x7c3cb812972e
[ 419.972564] Code: 48 8b 0d f5 46 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c2 46 0d 00 f7 d8 64 89 01 48
[ 419.974371] RSP: 002b:00007ffe30632548 EFLAGS: 00000286 ORIG_RAX: 00000000000000a5
[ 419.975048] RAX: ffffffffffffffda RBX: 00007ffe306328d8 RCX: 00007c3cb812972e
[ 419.975701] RDX: 0000000020000000 RSI: 0000000020000c80 RDI:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
There's issue as follows:
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.
BUG: unable to handle page fault for address: fffffbfff80c609a
PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0
Call Trace:
<TASK>
__die+0x1f/0x70
page_fault_oops+0x2cd/0x860
spurious_kernel_fault+0x36/0x450
do_kern_addr_fault+0xca/0x100
exc_page_fault+0x128/0x150
asm_exc_page_fault+0x26/0x30
percpu_counter_destroy_many+0xf7/0x2a0
mmdrop+0x209/0x350
finish_task_switch.isra.0+0x481/0x840
schedule_tail+0xe/0xd0
ret_from_fork+0x23/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
If register_sysctl() return NULL, then svc_rdma_proc_cleanup() will not
destroy the percpu counters which init in svc_rdma_proc_init().
If CONFIG_HOTPLUG_CPU is enabled, residual nodes may be in the
'percpu_counters' list. The above issue may occur once the module is
removed. If the CONFIG_HOTPLUG_CPU configuration is not enabled, memory
leakage occurs.
To solve above issue just destroy all percpu counters when
register_sysctl() return NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
initramfs: avoid filename buffer overrun
The initramfs filename field is defined in
Documentation/driver-api/early-userspace/buffer-format.rst as:
37 cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data
...
55 ============= ================== =========================
56 Field name Field size Meaning
57 ============= ================== =========================
...
70 c_namesize 8 bytes Length of filename, including final \0
When extracting an initramfs cpio archive, the kernel's do_name() path
handler assumes a zero-terminated path at @collected, passing it
directly to filp_open() / init_mkdir() / init_mknod().
If a specially crafted cpio entry carries a non-zero-terminated filename
and is followed by uninitialized memory, then a file may be created with
trailing characters that represent the uninitialized memory. The ability
to create an initramfs entry would imply already having full control of
the system, so the buffer overrun shouldn't be considered a security
vulnerability.
Append the output of the following bash script to an existing initramfs
and observe any created /initramfs_test_fname_overrunAA* path. E.g.
./reproducer.sh | gzip >> /myinitramfs
It's easiest to observe non-zero uninitialized memory when the output is
gzipped, as it'll overflow the heap allocated @out_buf in __gunzip(),
rather than the initrd_start+initrd_size block.
---- reproducer.sh ----
nilchar="A" # change to "\0" to properly zero terminate / pad
magic="070701"
ino=1
mode=$(( 0100777 ))
uid=0
gid=0
nlink=1
mtime=1
filesize=0
devmajor=0
devminor=1
rdevmajor=0
rdevminor=0
csum=0
fname="initramfs_test_fname_overrun"
namelen=$(( ${#fname} + 1 )) # plus one to account for terminator
printf "%s%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%s" \
$magic $ino $mode $uid $gid $nlink $mtime $filesize \
$devmajor $devminor $rdevmajor $rdevminor $namelen $csum $fname
termpadlen=$(( 1 + ((4 - ((110 + $namelen) & 3)) % 4) ))
printf "%.s${nilchar}" $(seq 1 $termpadlen)
---- reproducer.sh ----
Symlink filename fields handled in do_symlink() won't overrun past the
data segment, due to the explicit zero-termination of the symlink
target.
Fix filename buffer overrun by aborting the initramfs FSM if any cpio
entry doesn't carry a zero-terminator at the expected (name_len - 1)
offset. |
| DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMpurify was vulnerable to nesting-based mXSS. This vulnerability is fixed in 2.5.0 and 3.1.3. |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.3.6 has a DoS vulnerability when it parses an XML that has many deep elements that have same local name attributes. If you need to parse untrusted XMLs with tree parser API like REXML::Document.new, you may be impacted to this vulnerability. If you use other parser APIs such as stream parser API and SAX2 parser API, this vulnerability is not affected. The REXML gem 3.3.6 or later include the patch to fix the vulnerability. |
| Cacti is an open source performance and fault management framework. The`consolenewsection` parameter is not properly sanitized when saving external links in links.php . Morever, the said consolenewsection parameter is stored in the database and reflected back to user in `index.php`, finally leading to stored XSS. Users with the privilege to create external links can manipulate the “consolenewsection” parameter in the http post request while creating external links to perform stored XSS attacks. The vulnerability known as XSS (Cross-Site Scripting) occurs when an application allows untrusted user input to be displayed on a web page without proper validation or escaping. This issue has been addressed in release version 1.2.28. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Cacti is an open source performance and fault management framework. The `title` parameter is not properly sanitized when saving external links in links.php . Morever, the said title parameter is stored in the database and reflected back to user in index.php, finally leading to stored XSS. Users with the privilege to create external links can manipulate the `title` parameter in the http post request while creating external links to perform stored XSS attacks. The vulnerability known as XSS (Cross-Site Scripting) occurs when an application allows untrusted user input to be displayed on a web page without proper validation or escaping. This issue has been addressed in release version 1.2.28. All users are advised to upgrade. There are no known workarounds for this vulnerability. |