| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Crash in sharkd 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| Crash in sharkd 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| Memory leak in sharkd 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| An issue was discovered in libsndfile 1.2.2 IMA ADPCM codec. The AIFF code path (line 241) was fixed with (sf_count_t) cast, but the WAV code path (line 235) and close path (line 167) were not. When samplesperblock (int) * blocks (int) exceeds INT_MAX, the 32-bit multiplication overflows before being assigned to sf.frames (sf_count_t/int64). With samplesperblock=50000 and blocks=50000, the product 2500000000 overflows to -1794967296. This causes incorrect frame count leading to heap buffer overflow or denial of service. Both values come from the WAV file header and are attacker-controlled. This issue was discovered after an incomplete fix for CVE-2022-33065. |
| libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to version 0.49.4, the Rust libp2p Gossipsub implementation contains a remotely reachable panic in backoff expiry handling. After a peer sends a crafted PRUNE control message with an attacker-controlled, near-maximum backoff value, the value is accepted and stored as an Instant near the representable upper bound. On a later heartbeat, the implementation performs unchecked Instant + Duration arithmetic (backoff_time + slack), which can overflow and panic with: overflow when adding duration to instant. This issue is reachable from any Gossipsub peer over normal TCP + Noise + mplex/yamux connectivity and requires no further authentication beyond becoming a protocol peer. This issue has been patched in version 0.49.4. |
| libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.49.3, the Gossipsub implementation accepts attacker-controlled PRUNE backoff values and may perform unchecked time arithmetic when storing backoff state. A specially crafted PRUNE control message with an extremely large backoff (e.g. u64::MAX) can lead to Duration/Instant overflow during backoff update logic, triggering a panic in the networking state machine. This is remotely reachable over a normal libp2p connection and does not require authentication. Any application exposing a libp2p Gossipsub listener and using the affected backoff-handling path can be crashed by a network attacker that can reach the service port. The attack can be repeated by reconnecting and replaying the crafted control message. This issue has been fixed in version 0.49.3. |
| A vulnerability was determined in ghantakiran splunk-mcp-integration up to 0b86b09d5e5adf0433acd43c975951224613a1a6. Impacted is the function create_csv_export of the file services/csv-export-service/app/api/v1/endpoints/csv_export.py of the component CSV Export. This manipulation of the argument job_name causes path traversal. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: EM: Fix NULL pointer dereference when perf domain ID is not found
dev_energymodel_nl_get_perf_domains_doit() calls
em_perf_domain_get_by_id() but does not check the return value before
passing it to __em_nl_get_pd_size(). When a caller supplies a
non-existent perf domain ID, em_perf_domain_get_by_id() returns NULL,
and __em_nl_get_pd_size() immediately dereferences pd->cpus
(struct offset 0x30), causing a NULL pointer dereference.
The sister handler dev_energymodel_nl_get_perf_table_doit() already
handles this correctly via __em_nl_get_pd_table_id(), which returns
NULL and causes the caller to return -EINVAL. Add the same NULL check
in the get-perf-domains do handler.
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation. |
| Dolibarr is an enterprise resource planning (ERP) and customer relationship management (CRM) software package. In versions prior to 23.0.0 , the ODT to PDF conversion process in odf.php concatenates the MAIN_ODT_AS_PDF configuration constant directly into a shell command passed to exec() without sanitization. An authenticated administrator can inject arbitrary OS commands via this constant using command separators, achieving remote code execution as the web server user when any ODT template is generated. This issue has been fixed in version 23.0.0. |
| gdown is a Google Drive public file/folder downloader. Versions prior to 5.2.2 are vulnerable to a Path Traversal attack within the extractall functionality. When extracting a maliciously crafted ZIP or TAR archive, the library fails to sanitize or validate the filenames of the archive members. This allow files to be written outside the intended destination directory, potentially leading to arbitrary file overwrite and Remote Code Execution (RCE). Version 5.2.2 contains a fix. |
| Cross-Site Scripting (XSS) vulnerability was discovered in the GSVoIP web panel version 2.0.90. The `msg` parameter in the `/painel/gateways.php/error` endpoint does not properly sanitize user-supplied input, allowing attackers to inject arbitrary JavaScript into the HTML response. A remote attacker can exploit this vulnerability by sending a crafted URL to a victim, leading to unauthorized script execution, session hijacking, phishing, or other client-side attacks. |
| OS Command Injection Remote Code Execution Vulnerability in API in Progress ADC Products allows an authenticated attacker with “Geo Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the 'addcountry' command |
| SANE protocol dissector infinite loop in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| Kismet protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| Dissection engine LZ77 decompression crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| USB HID protocol dissector infinite loop in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| A vulnerability was found in ggerve coding-standards-mcp. This issue affects the function get_style_guide/get_best_practices of the file server.py. The manipulation of the argument Language results in path traversal. It is possible to launch the attack remotely. The exploit has been made public and could be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet. |
