| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/vrr: require valid min/max vfreq for VRR
Ensure the EDID provided min/max vfreq are valid. Most scenarios are
already covered (by coincidence) through the checks in
intel_vrr_is_capable() and intel_vrr_is_in_range(), but be more explicit
about it. At worst, a zero min_vfreq could lead to a division by zero in
intel_vrr_compute_vmax().
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
(cherry picked from commit 1765cf59f517b02f3b0591fe5120930d08bddeb6) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: bound EDID block reads to the response buffer
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix 32-bit overflow in CWSR total size calculation
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
(cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds in allocate_event_notification_slot
The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT
allocate_event_notification_slot has an option to specify
an event id to allocate at, used by CRIU. We weren't checking
the bounds on that value.
Check them.
v2: Lower bounds check is unecessary because of idr_alloc
already rejecting negative numbers. Upper bounds check should
be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might
not yet exist
(cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: acquire vm_ctx->lock before mapping memory to GPU VM
The drm gpuvm code doesn't protect find operation against map operation,
and the driver needs to ensure a map operation shouldn't happen when a
find operation is in progress.
In some cases a find operation will be in progress when doing map/unmap
operations, and the find operation will do a NULL pointer dereference.
An example of the stack trace of such NULL dereference is shown below:
```
Unable to handle kernel access to user memory without uaccess routines at
virtual address 0000000000000010
[<ffffffff01e989d4>] drm_gpuva_find+0x28/0x6c [drm_gpuvm]
[<ffffffff01ed3a40>] pvr_vm_unmap+0x34/0x68 [powervr]
[<ffffffff01ec69da>] pvr_ioctl_vm_unmap+0x2e/0x50 [powervr]
[<ffffffff8080ce0a>] drm_ioctl_kernel+0x8e/0xdc
[<ffffffff8080d016>] drm_ioctl+0x1be/0x3e0
[<ffffffff802bec3e>] __riscv_sys_ioctl+0xba/0xc4
[<ffffffff80d858b2>] do_trap_ecall_u+0x23e/0x3f4
[<ffffffff80d92288>] handle_exception+0x168/0x174
```
As all occurences of drm_gpuva_find*() are already guarded by
vm_ctx->lock, make pvr_vm_map() to acquire this lock to prevent
disturbing any find operation. This fixes the NULL deference problem in
drm_gpuva_find*(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix double call to drm_sched_entity_fini()
Call sequence of double call:
pvr_context_destroy
pvr_context_kill_queues
pvr_queue_kill
drm_sched_entity_destroy
drm_sched_entity_fini // here
pvr_context_put
kref_put(..., pvr_context_release)
pvr_context_destroy_queues
pvr_queue_destroy
drm_sched_entity_fini // here
Call to drm_sched_entity_destroy() from pvr_context_kill_queues() calls
drm_sched_entity_flush() + drm_sched_entity_fini().
drm_sched_entity_flush() ensures all pending jobs are completed and
drm_sched_entity_fini() ensures no further submission is allowed as
per expectation from pvr_context_kill_queues(). Double call to
drm_sched_entity_fini() is misuse of the API so keep call only in
pvr_context_create() failure path.
Stack trace for issue with addition of refcounting for DRM entity
stats in commit fd177135f0e6 ("drm/sched: Account entity GPU time"):
[ 789.490527] ------------[ cut here ]------------
[ 789.490559] refcount_t: underflow; use-after-free.
[ 789.490657] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xf4/0x144, CPU#0: kworker/u16:1/440
[ 789.490695] Modules linked in: powervr drm_gpuvm drm_exec gpu_sched drm_shmem_helper xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils sa2ul sha512 sha256 dwc3_am62 sha1 authenc rti_wdt libsha512 at24 sch_fq_codel fuse dm_mod ipv6
[ 789.490798] CPU: 0 UID: 0 PID: 440 Comm: kworker/u16:1 Not tainted 7.0.0-rc7-02049-g5e2c0700091b #22 PREEMPT
[ 789.490809] Hardware name: Texas Instruments AM625 SK (DT)
[ 789.490815] Workqueue: powervr-sched pvr_queue_fence_release_work [powervr]
[ 789.490868] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 789.490876] pc : refcount_warn_saturate+0xf4/0x144
[ 789.490884] lr : refcount_warn_saturate+0xf4/0x144
[ 789.490892] sp : ffff8000822cbcc0
[ 789.490895] x29: ffff8000822cbcc0 x28: 0000000000000000 x27: 0000000000000000
[ 789.490909] x26: 0000000000000000 x25: ffff800081b1e338 x24: ffff000004541405
[ 789.490922] x23: ffff000004bea950 x22: ffff00000042e400 x21: ffff000007123e30
[ 789.490935] x20: ffff000007123000 x19: ffff000007a80d50 x18: fffffffffffe7768
[ 789.490948] x17: 74736574202c6e6f x16: 697461746e656d65 x15: ffff800081b269f0
[ 789.490962] x14: 0000000000000030 x13: ffff800081b26a70 x12: 0000000000000211
[ 789.490975] x11: 00000000000000c0 x10: 0000000000000b50 x9 : ffff8000822cbb30
[ 789.490988] x8 : ffff0000014e7bb0 x7 : ffff00007725e780 x6 : 0000000372a05f49
[ 789.491001] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000010
[ 789.491013] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000014e7000
[ 789.491027] Call trace:
[ 789.491032] refcount_warn_saturate+0xf4/0x144 (P)
[ 789.491043] drm_sched_entity_fini+0x164/0x18c [gpu_sched]
[ 789.491081] pvr_queue_destroy+0x64/0x134 [powervr]
[ 789.491110] pvr_context_destroy_queues+0x34/0x64 [powervr]
[ 789.491138] pvr_context_release+0x70/0xac [powervr]
[ 789.491166] pvr_context_put.part.0+0x5c/0x7c [powervr]
[ 789.491193] pvr_context_put+0x14/0x24 [powervr]
[ 789.491221] pvr_queue_fence_release_work+0x20/0x38 [powervr]
[ 789.491249] process_one_work+0x160/0x4c4
[ 789.491264] worker_thread+0x188/0x310
[ 789.491276] kthread+0x130/0x13c
[ 789.491287] ret_from_fork+0x10/0x20
[ 789.491300] ---[ end trace 0000000000000000 ]--- |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formSmsManage interface. A remote attacker can inject arbitrary malicious commands into the action_value field, resulting in command execution with root privileges. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formLtefotaUpgradeFibocom interface. A remote attacker can inject arbitrary malicious commands into the fota_url field, resulting in command execution with root privileges. |
| A flaw has been found in abrinsmead mindpilot-mcp 0.5.0. Affected by this issue is some unknown functionality of the component HistoryService. This manipulation of the argument ID causes path traversal. The attack needs to be launched locally. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in MIMICLab mcp-pdf-vision 1.1.0. The impacted element is the function load_pdf of the file src/index.ts. Such manipulation of the argument pdfPath/sessionId leads to command injection. The attack can only be performed from a local environment. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function MmsMapping_varAccessSpecToObjectReference of the file src/iec61850/common/iec61850_common.c of the component MMS Protocol Workflow. Such manipulation of the argument GetNamedVariableListAttributesResponse.itemId leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The webhook URL validator in `website/notifications/webhooks.py` uses
`ip.is_global` to reject non-public addresses after DNS resolution. IPv6
transition addresses (NAT64 `64:ff9b::/96`, 6to4 `2002::/16`, Teredo
`2001:0000::/32`) are classified as globally routable by IANA, so `is_global`
returns `True` even when the embedded IPv4 targets a private, loopback, or
cloud metadata destination. An attacker can register a webhook pointing at a
hostname that resolves to a transition address to bypass the SSRF guard and
exfiltrate vulnerability data to an internal endpoint.
The vulnerability was introduced on a non-release version. The fix was already done on HEAD. It only affects
organisation running the HEAD. |
| Affected versions of MISP cti-transmute disclose users' email addresses through the account following-list endpoint. When an authenticated user follows another account, get_following() includes the followed user's email field in the API response alongside their name, user ID, and follow date. Because the email address is not required for the functionality and other related user lists omit it, an authenticated attacker could systematically follow users and collect their email addresses. The fix removes user.email from the returned object. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a93434
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
rtw_get_wps_ie() iterates over IE data from network frames without
validating that the IE header and payload fit within the remaining
buffer before reading them. Specifically:
- in_ie[cnt + 1] is read without checking cnt + 1 < in_len
- memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check
- in_ie[cnt + 1] is used as length without verifying payload fits
Add bounds checks at the top of the loop body to break early if fewer
than 2 bytes remain for the IE header, or if the declared payload
extends past the end of the buffer. Also require at least 4 bytes of
payload before comparing the WPS OUI. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL pointer dereference in rhash table destroy
When unbinding the ath12k driver, kernel NULL pointer dereferences
occur in irq_work_sync() called from rhashtable_destroy().
Two hash tables are affected:
1. ath12k_link_sta hash table in ath12k_base
2. ath12k_dp_link_peer hash table in ath12k_dp
The issue happens because the destroy functions are called unconditionally
in cleanup paths, but the hash tables are only initialized late in their
respective init functions. If the device was never fully started or if the
init functions failed before initializing the hash tables, the pointers
will be NULL. The issues are always reproducible from a VM because the MSI
addressing initialization is failing.
Call trace for ath12k_link_sta_rhash_tbl_destroy:
RIP: irq_work_sync+0x1e/0x70
rhashtable_destroy+0x12/0x60
ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k]
ath12k_core_stop+0xe/0x80 [ath12k]
ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k]
ath12k_pci_remove+0x60/0x110 [ath12k]
Call trace for ath12k_dp_link_peer_rhash_tbl_destroy:
RIP: irq_work_sync+0x1e/0x70
rhashtable_destroy+0x12/0x60
ath12k_dp_link_peer_rhash_tbl_destroy+0x29/0x50 [ath12k]
ath12k_dp_cmn_device_deinit+0x21/0x140 [ath12k]
ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k]
ath12k_pci_remove+0x60/0x110 [ath12k]
Fix this by adding NULL checks before calling rhashtable_destroy() in
both destroy functions.
The NULL check approach was chosen because the rhashtable pointer
serves as the initialization state indicator. The init can fail at
various points, leaving some components uninitialized. Checking the
pointer directly is simpler than adding separate state flags that
would need synchronization. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai). |
