| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect Use of Privileged APIs, Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in Sechard Information Technologies SecHard allows Authentication Bypass, Interface Manipulation, Authentication Abuse, Harvesting Information via API Event Monitoring.This issue affects SecHard: before 3.3.0.20220411. |
| A vulnerability, which was classified as problematic, has been found in FNKvision FNK-GU2 up to 40.1.7. Affected by this issue is some unknown functionality of the file /rom/wpa_supplicant.conf. The manipulation leads to cleartext storage of sensitive information. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. |
| A vulnerability in the Palo Alto Networks PAN-OS® software enables unlicensed administrators to view clear-text data captured using the packet capture feature https://docs.paloaltonetworks.com/pan-os/11-0/pan-os-admin/monitoring/take-packet-captures/take-a-custom-packet-capture in decrypted HTTP/2 data streams traversing network interfaces on the firewall. HTTP/1.1 data streams are not impacted.
In normal conditions, decrypted packet captures are available to firewall administrators after they obtain and install a free Decryption Port Mirror license. The license requirement ensures that this feature can only be used after approved personnel purposefully activate the license. For more information, review how to configure decryption port mirroring https://docs.paloaltonetworks.com/network-security/decryption/administration/monitoring-decryption/configure-decryption-port-mirroring .
The administrator must obtain network access to the management interface (web, SSH, console, or telnet) and successfully authenticate to exploit this issue. Risk of this issue can be greatly reduced by restricting access to the management interface to only trusted administrators and from only internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
Customer firewall administrators do not have access to the packet capture feature in Cloud NGFW. This feature is available only to authorized Palo Alto Networks personnel permitted to perform troubleshooting.
Prisma® Access is not impacted by this vulnerability. |
| QiHang Media Web Digital Signage 3.0.9 contains a sensitive information disclosure vulnerability that allows remote attackers to intercept user authentication credentials through cleartext cookie transmission. Attackers can perform man-in-the-middle attacks to capture and potentially misuse stored authentication credentials transmitted in an insecure manner. |
| Cleartext Storage of Sensitive Information in Memory vulnerability in ABB MConfig.This issue affects MConfig: through 1.4.9.21. |
| On affected platforms running Arista EOS with secure Vxlan configured, restarting the Tunnelsec agent will result in packets being sent over the secure Vxlan tunnels in the clear. |
| A cleartext transmission of sensitive information vulnerability in the affected products allows an unauthorized remote attacker to gain login credentials and access the Web-UI. |
| A security issue was discovered within the legacy Ansible playbook component of Verve Asset Manager, caused by plaintext secrets incorrectly stored when a playbook is running. This component has been retired and has been optional since the 1.36 release in 2024. |
| This vulnerability exists in Digisol DG-GR6821AC Router due to use of default admin credentials at its web management interface. An attacker with physical access could exploit this vulnerability by extracting the firmware and reverse engineer the binary data to access the hardcoded default credentials stored in the firmware of the targeted device.
Successful exploitation of this vulnerability could allow the attacker to gain unauthorized access to the targeted device. |
| Cleartext storage of sensitive information was discovered in Click Programming Software version v3.60. The vulnerability can be exploited by a local user with access to the file system, while an administrator session is active, to steal credentials stored in clear text. |
| Ambiguous wording in the web interface of the ctrlX OS setup mechanism could lead the user to believe that the backup file is encrypted when a password is set. However, only the private key - if available in the backup - is encrypted, while the backup file itself remains unencrypted. |
| An adjacent attacker without authentication can exploit this vulnerability to retrieve a set of user-privileged credentials. These credentials are present during the firmware upgrade procedure. |
| An issue in H3C switch h3c-S1526 allows a remote attacker to obtain sensitive information via the S1526.cfg component. |
| zhmcclient is a pure Python client library for the IBM Z HMC Web Services API. In affected versions the Python package "zhmcclient" writes password-like properties in clear text into its HMC and API logs in the following cases: 1. The 'boot-ftp-password' and 'ssc-master-pw' properties when creating or updating a partition in DPM mode, in the zhmcclient API and HMC logs. 2. The 'ssc-master-pw' and 'zaware-master-pw' properties when updating an LPAR in classic mode, in the zhmcclient API and HMC logs. 3. The 'ssc-master-pw' and 'zaware-master-pw' properties when creating or updating an image activation profile in classic mode, in the zhmcclient API and HMC logs. 4. The 'password' property when creating or updating an HMC user, in the zhmcclient API log. 5. The 'bind-password' property when creating or updating an LDAP server definition, in the zhmcclient API and HMC logs. This issue affects only users of the zhmcclient package that have enabled the Python loggers named "zhmcclient.api" (for the API log) or "zhmcclient.hmc" (for the HMC log) and that use the functions listed above. This issue has been fixed in zhmcclient version 1.18.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| All WorkExaminer Professional traffic between monitoring client, console and server is transmitted as plain text. This allows an attacker with access to the network to read the transmitted sensitive data. An attacker can also freely modify the data on the wire. The monitoring clients transmit their data to the server using the unencrypted FTP. Clients connect to the FTP server on port 12304 and transmit the data unencrypted. In addition, all traffic between the console client and the server at port 12306 is unencrypted. |
| Arctera/Veritas Data Insight before 7.1.2 can send cleartext credentials when configured to use HTTP Basic Authentication to a Dell Isilon OneFS server. |
| Exposure of Sensitive Information to an Unauthorized Actor, Missing Encryption of Sensitive Data, Files or Directories Accessible to External Parties vulnerability in Kings Information & Network Co. KESS Enterprise on Windows allows Privilege Escalation, Modify Existing Service, Modify Shared File.This issue affects KESS Enterprise: before *.25.9.19.exe |
| The MIB3 unit stores the synchronized phone contact book in clear-text, allowing an attacker with either code execution privilege on the system or physical access to the system to obtain vehicle owner's contact data.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| Emerson ValveLink Products store
sensitive information in cleartext within a resource that might be accessible to another control sphere. |
| Unencrypted storage in the database in Two App Studio Journey v5.5.9 for iOS allows local attackers to extract sensitive data via direct access to the app’s filesystem. |
