| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: stop estimator after disabled calc phase
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: rx: restore msg_iter before TLS 1.3 optimistic retry
tls_decrypt_sg() advances msg->msg_iter when it maps user pages for
the optimistic TLS 1.3 zero-copy path. If the decrypted record turns
out not to be unpadded application data, tls_decrypt_sw() retries into
a kernel skb, but leaves the iterator advanced.
The subsequent copy from the skb then writes decrypted bytes again at
a later point in the caller iovecs while recvmsg() reports only the
post-retry length. A TLS peer can trigger this after the receiver
enables TLS_RX_EXPECT_NO_PAD.
Revert the iterator by the number of bytes consumed by the optimistic
mapping before retrying without zero-copy.
Add a selftest which sends a TLS 1.3 control record with
TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not
overwrite later iovecs beyond the returned length. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: fix OOB write in fcp_meter_ctl_get()
fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size
by the driver's own limit of 255
if (map.map_size < 1 || map.map_size > 255 ||
map.meter_slots < 1 || map.meter_slots > 255)
return -EINVAL;
and passes it to fcp_add_new_ctl() as the control's channel count, where
it is stored as elem->channels.
Every control read writes into struct snd_ctl_elem_value, whose integer
array is declared long value[128], so the limit is 128, not 255.
fcp_meter_ctl_get() stores one 64-bit word per channel into that array
with no bound of its own:
for (i = 0; i < elem->channels; i++) {
int idx = private->meter_level_map[i];
int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]);
ucontrol->value.integer.value[i] = value;
}
snd_ctl_elem_read_user() serves that object from
memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of
kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so
element i is written at byte 72 + 8 * i and element 144 already lands
past the allocation. At map_size 255 the last store ends at byte 2112,
888 bytes past the object and 64 bytes into the adjacent slab object.
The stored words come from the device and meter_level_map[] selects
which word lands in which slot, so extent and contents are both
controlled.
The core does not catch this. snd_ctl_check_elem_info() is reached only
from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under
CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a
compile-time true. __snd_ctl_add_replace() validates kcontrol->count and
never inspects elem->channels.
Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives
the hwdep descriptor that created it, so the out-of-bounds stores are
issued by any process able to read controls on /dev/snd/controlC0.
KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read:
BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get
Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185
__asan_store8
fcp_meter_ctl_get
snd_ctl_elem_read
snd_ctl_ioctl
Allocated by task 185:
memdup_user
snd_ctl_ioctl
The buggy address is located 0 bytes to the right of
allocated 1224-byte region [ffff000017af0000, ffff000017af04c8)
Bound the map size by the ABI limit rather than by 255, and bound the
store loop at the sink so it cannot run past the value array whatever
elem->channels holds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: avoid out-of-bounds write in ip_vs_nat_icmp
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: reject clones that overrun skb_shared_info tailroom
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip6ip6_err()
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: bound the hwdep mmap fault offset
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix sk_buff leak when the header checks reject a packet
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers
Another challenge with unlocked filters.
There is a short window in tc_new_tfilter where a tcf_proto can be found
and briefly referenced by a totally unrelated, unlocked classifier's request
and cause a race.
Feng created a poc which created this race with two threads, one creating a
u32 filter and other a flower filter in the same chain/prio:
1. Both threads enter tc_new_tfilter, both find the chain empty, both
drop filter_chain_lock
2. u32 finishes tcf_proto_create("u32") first, calls
tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain
3. flower finishes tcf_proto_create("flower") later, calls
tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp
already there, takes a reference on it, destroys flower's own tp_new
and returns u32_tp to the caller.
Flower then hits the kind mismatch check (because it requested for kind
"flower" but tp->ops->kind is "u32") and goes through the errout path
which calls tcf_proto_put() on u32_tp. If the u32 thread has already
gone through its own errout (its change() call failed on the PoC's empty
options) and dropped its create and insert refs, flower's put is the
last one and drops u32_tp's refcnt to zero.
At this point tp->ops->destroy() runs in a context that never took
rtnl_lock. When that happens, it might cause a UAF like the following
(illustrated by the PoC):
[ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393)
[ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524
Call Trace:
u32_init (net/sched/cls_u32.c:393)
tc_new_tfilter (net/sched/cls_api.c:2378)
Allocated by task 526:
u32_init (net/sched/cls_u32.c:378)
tc_new_tfilter (net/sched/cls_api.c:2378)
Freed by task 522:
kfree
u32_destroy (net/sched/cls_u32.c:662)
tcf_proto_destroy (net/sched/cls_api.c:446)
tcf_proto_put (net/sched/cls_api.c:459)
tc_new_tfilter (net/sched/cls_api.c:2459)
Fix this by having tcf_proto_destroy() take rtnl_lock around
tp->ops->destroy() for locked classifiers whenever rtnl is not held.
To explain why I used a temp variable "not_lockless" I'd like to point to a
semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here
for future cleanup if deemed necessary):
The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are
redundant sources of truth for whether rtnl_lock is held. Among the nine
classifier destroy(..rtnl_held..) callbacks, only flower consults the
rtnl_held parameter which it propagates to tc_setup_cb_destroy()
and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic,
fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy()
(u32, bpf, mall) hardcode true always instead of forwarding the parameter.
A future cleanup should remove the rtnl_held parameter from the destroy callback
signature entirely and have callers rely solely on their knowledge whether
they are running in an unlocked context. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: clear IPv4 options after rebasing tunnel ICMP errors
ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the
quoted original request before passing it to icmp_send(). However,
IPCB(skb)->opt still describes the outer IPv4 header.
A timestamp option in the outer header can therefore leave an offset
that points into the quoted transport header after the rebase.
__ip_options_echo() treats a byte at that stale location as the option
length and copies it into the fixed-size option storage on the
__icmp_send() stack, causing a stack out-of-bounds write.
Clear the stale option metadata after resetting the network header.
Keep the remaining control block fields, including the ingress
interface used by the ICMP response path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: release template ct on non-IP path
A bridge nftables ct zone set rule can attach a conntrack template to
an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6
EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with
IP_CT_UNTRACKED without releasing the existing template reference.
That makes the per-cpu template, and any temporary templates allocated
for concurrent use, unreachable and leaks memory until the host runs out
of slab.
Reset the skb conntrack state before marking the frame untracked so the
existing template reference is dropped on the non-IP path. |
| Joomla Extension - joomlack.fr - Reflected XSS in Page Builder CK < 3.6.5 - The Joomla extension Page Builder CK is vulnerable to a reflected XSS via the iscontenttype parameter. |
| Renovate versions from 31.51.0 before 40.33.0 contain a command injection vulnerability in the helmv3 manager where the repository parameter is appended to helm registry login commands without proper sanitization. Attackers with repository write access can craft malicious Chart.yaml files to execute arbitrary commands on the machine running Renovate. |
| Streambert is a cross-platform Electron Desktop App to stream and download video content. Prior to 2.6.0, the perform-scheduled-backup IPC handler in src/ipc/storage.js takes settings.path from a renderer-supplied object and uses the resulting directory for fs.mkdirSync, fs.writeFileSync, fs.readdirSync, and fs.unlinkSync operations without checking that it is inside an authorized backup location. A compromised renderer can choose an absolute path or a relative traversal path to create directories and write a streambert-backup-[timestamp].json file containing renderer-controlled data. The pruning loop can also delete files in that directory whose names begin with streambert-backup- and end with .json. This vulnerability is fixed in 2.6.0. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.11.11, electerm constructs operating system commands in src/app/lib/fs.js by interpolating untrusted file paths into the rmrf(), mv(), and cp() functions. A malicious SSH or SFTP server can provide a filename containing quote characters and shell metacharacters, and a victim can cause that filename to reach the affected operation during remote-to-local transfer, conflict renaming, copying, moving, or removal. The generated `rm -rf`, mv, `cp -r`, PowerShell Remove-Item, Move-Item, or Copy-Item command can then interpret the filename as shell syntax. This allows arbitrary command execution with the electerm desktop user's privileges on POSIX and Windows systems, enabling data exfiltration, file modification, malware installation, or denial of service. This issue is fixed in version 3.11.11. |
| A vulnerability has been found in code-projects Online Job Portal System 1.0. The impacted element is an unknown function of the file /ForPass.php of the component Password Recovery. Such manipulation of the argument txtUserName leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| Adobe Experience Manager versions 6.5.24, LTS SP1, 2026.04 and earlier are affected by a DOM-based Cross-Site Scripting (XSS) vulnerability. An attacker could exploit this issue by manipulating the DOM environment to execute malicious JavaScript within the context of the victim's browser. Exploitation of this issue requires user interaction in that a victim must visit a crafted webpage. Scope is changed. |
| Mistune is a Python Markdown parser with renderers and plugins. Versions 3.3.0 through 3.3.2 are vulnerable to DoS through deeply nested tokens. HTML rendering creates deeply nested emphasis tokens from consecutive asterisk characters, and recursive rendering in HTMLRenderer.render_token() can exceed Python's recursion limit and raise RecursionError, allowing crafted Markdown to crash a parsing process. This issue is fixed in version 3.3.3 |
| Cross-site scripting in the Web Administration interface of Network Optix Nx Witness VMS before version 6.1.3 on Linux, Windows and MacOS allows an adjacent-network attacker to execute arbitrary JavaScript in the browser of an authenticated administrator and steal the administrator's session token, resulting in Administrator Account Takeover. An attacker who controls an Nx server on the same network segment can set that server's site name to a script payload, which executes when an administrator opens the "Merge with Another Site" dialog and the site selection list is displayed.Solution:
Update to Nx Witness VMS version 6.1.3 or later. |
| Malla is a web analyzer for Meshtastic networks based on MQTT data. Prior to commit 4086e2b5f61615a813b70b25bc76095083552135, code names (long_name, short_name) received via MQTT are stored in SQLite without sanitization and rendered into the DOM without escaping. Any participant on a public Meshtastic MQTT broker can set a malicious node name that executes JavaScript in the browser of every Malla dashboard visitor. Commit 4086e2b5f61615a813b70b25bc76095083552135 fixes the issue. |
