| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nokogiri before 1.11.4 (CRuby implementation only, when the packaged/vendored libxml2 is used) bundles libxml2 2.9.10, which is affected by multiple vulnerabilities addressed in libxml2 2.9.12, including a memory leak in xmlSchemaValidateStream (CVE-2019-20388), a global buffer over-read in xmlEncodeEntitiesInternal (CVE-2020-24977), a heap-based buffer overflow (CVE-2021-3517), and an out-of-bounds read (CVE-2021-3518). Processing crafted XML documents may lead to denial of service, information disclosure, or memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: hynitron_cstxxx - validate touch count and finger IDs
The driver allocates max_touch_num input slots, which are indexed from
zero through max_touch_num - 1. The current check allows a finger ID
equal to max_touch_num to reach cst3xx_report_contact(). While the input
core ignores out-of-range slot indices, reporting touch data without a
valid slot change corrupts the touch state of the previously active slot.
The touch count is read from the controller's report and is used to
index the fixed-size report buffer without first checking its range.
Reject counts larger than the supported number of touch slots before
checking the trailing byte or parsing touch data.
Reject finger IDs equal to or greater than max_touch_num, and return
immediately when an invalid finger ID is encountered so that corrupt
touch frames are discarded instead of reporting partial contact state.
The V821 Avaota F1 board configures the vendor driver with one touch
slot, so finger ID 1 is already invalid on that device. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1]. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: fail early if address range parameters are invalid
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access. |
| Budibase backend-core (@budibase/backend-core, as used by @budibase/server) omits the shared address space range 100.64.0.0/10 from its default SSRF blacklist (DEFAULT_BLACKLIST) used by REST datasource query previews. When the default blacklist is active (i.e., a self-hosted deployment has not defined BLACKLIST_IPS), an authenticated user with the Builder permission can submit a REST datasource query preview request to POST /api/queries/preview targeting a reachable HTTP(S) service in the 100.64.0.0/10 range, causing the server to send a request to that target and return its response through the preview flow. Per the advisory, no released fix was identified at the time of publication; remediation is to add 100.64.0.0/10 to DEFAULT_BLACKLIST. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.4.0 through 4.14.6, a party holding the cluster key can write, overwrite, or delete arbitrary files under /var/ossec on worker nodes, leading to remote code execution as root. During cluster file synchronization, the non-merged branch of update_master_files_in_worker() moves each staged file to a destination derived only from safe_join(), which confines the path to /var/ossec but never verifies that the file lands in the directory declared by its cluster_item_key. Because the destination check present on the primary node and on the worker's merged branch was not applied, a peer can place files at attacker-chosen locations under /var/ossec, including paths that are executed as root, and the delete branch has the same gap. This is an incomplete fix for CVE-2026-30893, which addressed traversal outside /var/ossec but left this path able to redirect files anywhere within it. This issue is fixed in version 4.14.7. |
| WatchGuard Dimension's Web UI exposes an administrator passphrase change action that lacks CSRF protection. An attacker who can induce an authenticated global administrator's browser to visit a crafted link or page can change that administrator's passphrase to an attacker-chosen value without the administrator's consent. |
| An attacker that can reach a container's published TCP port may be able to force the host's forwarding process to buffer an unbounded amount of that client's data in memory, for as long as the backend container connection takes to complete — with no cap on how much accumulates or how long the wait can be stretched. This vulnerability is addressed in container version 1.2.0. |
| Joomla Extension - digital-peak.com - Authenticated, privileged blind SQL injection in DP Calendar 5.5.0 - 10.11.2 - Saving an article can trigger a blind SQL injection with content plugin, needs update permission for articles. |
| Catalyst::Plugin::Static::Simple versions through 0.38 for Perl mark responses as publicly cacheable.
The _serve_static method always sets the Cache-Control header to "public", with no means of overriding it. This advises proxies that the content may be stored in a shared cache, and may be reused in responses to requests from other users. (This includes requests with an Authorization header.)
Configuring the expires time to "0" to disable caching, as documented, is ignored. |
| Ceph is an open-source distributed storage platform providing object, block, and file storage. In versions prior to 20.2.4 and 19.2.6, the Monitor subscription handler fails to properly authorize access to the configuration-key store, allowing any CephX user with only `mon allow r` capabilities to read the entire store by sending a single crafted MMonSubscribe message. The config-key store holds sensitive secrets including OSD LUKS disk-encryption passphrases and, on cephadm-managed clusters, the SSH private key that cephadm uses to reach every host in the cluster. Because that key grants root on every node under the default cephadm configuration, a low-privileged read-only account can escalate to full cluster and host compromise. This issue is fixed in versions 20.2.4 and 19.2.6 |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Akilli Ticaret Software Technologies Ltd. E-Commerce Pack allows Stored XSS.
This issue affects E-Commerce Pack: from 4.5.001 through 28082026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.14.0 through 4.14.6, a low-privilege API user can read the cleartext cluster key from a configuration endpoint that fails to redact it. The REST API provides a masking control, mask_sensitive_config, that redacts sensitive fields such as authd.pass and cluster.key from configuration responses for users who lack update-config permission, and every config-read endpoint carries this decorator except GET /cluster/local/config. That endpoint, backed by read_config_wrapper, is gated only by cluster:read and returns the local node's cluster configuration including the cleartext key, whereas its siblings return the same value masked. As a result, any account with the default readonly or cluster_readonly role, which is explicitly denied update-config precisely so it cannot view secrets, receives the real cluster key. Because the cluster key authenticates and encrypts traffic between cluster nodes, disclosing it to an unprivileged account provides the authentication precondition for the cluster-peer remote code execution chains established by prior advisories. This issue is fixed in version 4.14. |
| Joomla Extension - digital-peak.com - Authenticated, privileged stored XSS in DP Calendar 7.0.0 - 10.11.2 - Location title is rendered in data attribute without escaping leads to XSS, needs create permission in DPCalendar. |
| In Bouncy Castle for Java before 1.85, PKCS#8 / PBES2 decryptors honour unbounded KDF cost from input. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bcpkix-fips 1.0.12 (1.0.X series), 2.0.12 (2.0.X series) and 2.1.12 (2.1.X series). |
