| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
Helge reported that the introduction of PP_MAGIC_MASK let to crashes on
boot on his 32-bit parisc machine. The cause of this is the mask is set
too wide, so the page_pool_page_is_pp() incurs false positives which
crashes the machine.
Just disabling the check in page_pool_is_pp() will lead to the page_pool
code itself malfunctioning; so instead of doing this, this patch changes
the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel
pointers for page_pool-tagged pages.
The fix relies on the kernel pointers that alias with the pp_magic field
always being above PAGE_OFFSET. With this assumption, we can use the
lowest bit of the value of PAGE_OFFSET as the upper bound of the
PP_DMA_INDEX_MASK, which should avoid the false positives.
Because we cannot rely on PAGE_OFFSET always being a compile-time
constant, nor on it always being >0, we fall back to disabling the
dma_index storage when there are not enough bits available. This leaves
us in the situation we were in before the patch in the Fixes tag, but
only on a subset of architecture configurations. This seems to be the
best we can do until the transition to page types in complete for
page_pool pages.
v2:
- Make sure there's at least 8 bits available and that the PAGE_OFFSET
bit calculation doesn't wrap |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: guard against EA inode refcount underflow in xattr update
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0
and sctp_ulpevent_make_authkey() returns 0, then the variable
ai_ev remains zero and the zero will be dereferenced
in the sctp_ulpevent_free() function. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request().
syzbot reported the splat below in tcp_conn_request(). [0]
If a listener is close()d while a TFO socket is being processed in
tcp_conn_request(), inet_csk_reqsk_queue_add() does not set reqsk->sk
and calls inet_child_forget(), which calls tcp_disconnect() for the
TFO socket.
After the cited commit, tcp_disconnect() calls reqsk_fastopen_remove(),
where reqsk_put() is called due to !reqsk->sk.
Then, reqsk_fastopen_remove() in tcp_conn_request() decrements the
last req->rsk_refcnt and frees reqsk, and __reqsk_free() at the
drop_and_free label causes the refcount underflow for the listener
and double-free of the reqsk.
Let's remove reqsk_fastopen_remove() in tcp_conn_request().
Note that other callers make sure tp->fastopen_rsk is not NULL.
[0]:
refcount_t: underflow; use-after-free.
WARNING: CPU: 12 PID: 5563 at lib/refcount.c:28 refcount_warn_saturate (lib/refcount.c:28)
Modules linked in:
CPU: 12 UID: 0 PID: 5563 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:refcount_warn_saturate (lib/refcount.c:28)
Code: ab e8 8e b4 98 ff 0f 0b c3 cc cc cc cc cc 80 3d a4 e4 d6 01 00 75 9c c6 05 9b e4 d6 01 01 48 c7 c7 e8 df fb ab e8 6a b4 98 ff <0f> 0b e9 03 5b 76 00 cc 80 3d 7d e4 d6 01 00 0f 85 74 ff ff ff c6
RSP: 0018:ffffa79fc0304a98 EFLAGS: 00010246
RAX: d83af4db1c6b3900 RBX: ffff9f65c7a69020 RCX: d83af4db1c6b3900
RDX: 0000000000000000 RSI: 00000000ffff7fff RDI: ffffffffac78a280
RBP: 000000009d781b60 R08: 0000000000007fff R09: ffffffffac6ca280
R10: 0000000000017ffd R11: 0000000000000004 R12: ffff9f65c7b4f100
R13: ffff9f65c7d23c00 R14: ffff9f65c7d26000 R15: ffff9f65c7a64ef8
FS: 00007f9f962176c0(0000) GS:ffff9f65fcf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000180 CR3: 000000000dbbe006 CR4: 0000000000372ef0
Call Trace:
<IRQ>
tcp_conn_request (./include/linux/refcount.h:400 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/net/sock.h:1965 ./include/net/request_sock.h:131 net/ipv4/tcp_input.c:7301)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6708)
tcp_v6_do_rcv (net/ipv6/tcp_ipv6.c:1670)
tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1906)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438)
ip6_input (net/ipv6/ip6_input.c:500)
ipv6_rcv (net/ipv6/ip6_input.c:311)
__netif_receive_skb (net/core/dev.c:6104)
process_backlog (net/core/dev.c:6456)
__napi_poll (net/core/dev.c:7506)
net_rx_action (net/core/dev.c:7569 net/core/dev.c:7696)
handle_softirqs (kernel/softirq.c:579)
do_softirq (kernel/softirq.c:480)
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: skcipher - Fix reqsize handling
Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs [1]
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in skcipher algorithms, hence, causes memory
corruptions and crashes as the underlying functions in the algorithm
framework have not been updated to set the reqsize properly from
cra_reqsize. [2]
Add proper set_reqsize calls in the skcipher init function to
properly initialize reqsize for these algorithms in the framework.
[1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/
[2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b |
| In the Linux kernel, the following vulnerability has been resolved:
tls: wait for pending async decryptions if tls_strp_msg_hold fails
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
Stephen noted that it is possible to not have an smp_mb() between
the loaded_mm store and the tlb_gen load in switch_mm(), meaning the
ordering against flush_tlb_mm_range() goes out the window, and it
becomes possible for switch_mm() to not observe a recent tlb_gen
update and fail to flush the TLBs.
[ dhansen: merge conflict fixed by Ingo ] |
| In the Linux kernel, the following vulnerability has been resolved:
net/ip6_tunnel: Prevent perpetual tunnel growth
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages()
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use dst_dev_rcu() in sk_setup_caps()
Use RCU to protect accesses to dst->dev from sk_setup_caps()
and sk_dst_gso_max_size().
Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(),
and ip_dst_mtu_maybe_forward().
ip4_dst_hoplimit() can use dst_dev_net_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative offsets for ALU ops
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs. |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match().
smc_clc_prfx_match() is called from smc_listen_work() and
not under RCU nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the returned value of smc_clc_prfx_match() is not
used in the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity
file on a corrupted ext4 filesystem mounted without a journal.
The issue is that the filesystem has an inode with both the INLINE_DATA
and EXTENTS flags set:
EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15:
comm syz.0.17: corrupted extent tree: lblk 0 < prev 66
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Check GuC running state before deregistering exec queue
In normal operation, a registered exec queue is disabled and
deregistered through the GuC, and freed only after the GuC confirms
completion. However, if the driver is forced to unbind while the exec
queue is still running, the user may call exec_destroy() after the GuC
has already been stopped and CT communication disabled.
In this case, the driver cannot receive a response from the GuC,
preventing proper cleanup of exec queue resources. Fix this by directly
releasing the resources when GuC is not running.
Here is the failure dmesg log:
"
[ 468.089581] ---[ end trace 0000000000000000 ]---
[ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535)
[ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535
[ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1
[ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1)
[ 468.092716] ------------[ cut here ]------------
[ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe]
"
v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled().
As CT may go down and come back during VF migration.
(cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea) |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: m2m: Fix streaming cleanup on release
If streamon/streamoff calls are imbalanced, such as when exiting an
application with Ctrl+C when streaming, the m2m usage_count will never
reach zero and the ISI channel won't be freed. Besides from that, if the
input line width is more than 2K, it will trigger a WARN_ON():
[ 59.222120] ------------[ cut here ]------------
[ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654
[ 59.238569] Modules linked in: ap1302
[ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT
[ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT)
[ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120
[ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120
[ 59.275047] sp : ffff8000848c3b40
[ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00
[ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001
[ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780
[ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000
[ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c
[ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30
[ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420
[ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000
[ 59.349590] Call trace:
[ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P)
[ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c
[ 59.361072] v4l_streamon+0x24/0x30
[ 59.364556] __video_do_ioctl+0x40c/0x4a0
[ 59.368560] video_usercopy+0x2bc/0x690
[ 59.372382] video_ioctl2+0x18/0x24
[ 59.375857] v4l2_ioctl+0x40/0x60
[ 59.379168] __arm64_sys_ioctl+0xac/0x104
[ 59.383172] invoke_syscall+0x48/0x104
[ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0
[ 59.391613] do_el0_svc+0x1c/0x28
[ 59.394915] el0_svc+0x34/0xf4
[ 59.397966] el0t_64_sync_handler+0xa0/0xe4
[ 59.402143] el0t_64_sync+0x198/0x19c
[ 59.405801] ---[ end trace 0000000000000000 ]---
Address this issue by moving the streaming preparation and cleanup to
the vb2 .prepare_streaming() and .unprepare_streaming() operations. This
also simplifies the driver by allowing direct usage of the
v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Harden userspace-supplied xdp_desc validation
Turned out certain clearly invalid values passed in xdp_desc from
userspace can pass xp_{,un}aligned_validate_desc() and then lead
to UBs or just invalid frames to be queued for xmit.
desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len
can cause positive integer overflow and wraparound, the same way low
enough desc->addr with a non-zero pool->tx_metadata_len can cause
negative integer overflow. Both scenarios can then pass the
validation successfully.
This doesn't happen with valid XSk applications, but can be used
to perform attacks.
Always promote desc->len to ``u64`` first to exclude positive
overflows of it. Use explicit check_{add,sub}_overflow() when
validating desc->addr (which is ``u64`` already).
bloat-o-meter reports a little growth of the code size:
add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44)
Function old new delta
xskq_cons_peek_desc 299 330 +31
xsk_tx_peek_release_desc_batch 973 1002 +29
xsk_generic_xmit 3148 3132 -16
but hopefully this doesn't hurt the performance much. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU in ip6_output()
Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent
possible UAF.
We can remove rcu_read_lock()/rcu_read_unlock() pairs
from ip6_finish_output2(). |
