| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: xilinx: use FIFO occupancy register to determine buffer size
The method the driver uses to determine the size of the FIFO has a
problem. What it currently does is this:
It stops the SPI hardware and writes to the TX FIFO register until TX
FIFO FULL asserts in the status register. But the hardware does not only
have the FIFO, it also has a shift register which can hold a byte. This
can be seen, when writing a byte to the FIFO (while the SPI hardware is
stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size
of 16 for example, the current method returns a 17.
This is a problem, at least when using the driver in irq mode. The same
size determined for the TX FIFO is also assumed for the RX FIFO. When a
SPI transaction wants to write the amount of the FIFO size or more
bytes, the following happens, for example with 16 bytes FIFO size:
The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and
starts the SPI hardware and goes sleep.
The hardware then shifts out 17 bytes (FIFO + shift register) and
simultaneously reads bytes into the RX FIFO, but it only has 16 places,
so it looses one byte. Then TX FIFO empty asserts, wakes the driver
again, which has a fast path and reads 16 bytes from the RX FIFO, but
before reading the last 17th byte (which is lost) it does this:
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
xilinx_spi_rx(xspi);
rx_words--;
}
It reads the status register and checks if the RX FIFO is not empty.
But it is empty in our case. So this check spins in a while loop
forever locking the driver.
This patch fixes the logic to determine the FIFO size. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: avoid stale FIFO cells during resize
snd_seq_fifo_resize() still needs to publish the replacement pool
before it waits for FIFO users. A blocking snd_seq_read() holds
f->use_lock while it sleeps, so concurrent senders must be able to
queue to the new pool and wake that reader instead of failing against a
closing old pool.
However, snd_seq_fifo_event_in() duplicates an event before it takes
f->lock, and snd_seq_read() can dequeue a cell and later call
snd_seq_fifo_cell_putback() if copy_to_user() or
snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches
oldhead in between, either path can relink an old-pool cell after the
snapshot. That stale cell sits outside the drained oldhead list, keeps
oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting
for the retired pool to drain.
Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(),
but reject stale cells before any FIFO relink. Revalidate event-in cells
under f->lock and retry them against the published replacement pool, and
free stale putback cells instead of linking them back into the FIFO.
The buggy scenario involves two paths, with each column showing the
order within that path:
resize path: relink path:
1. Allocate newpool. 1. Take f->use_lock.
2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool
detach oldhead. cell before oldpool closes.
3. Mark oldpool closing and 3. Reach a later relink point after
wait for FIFO users. resize published newpool.
4. Free oldhead and delete 4. Relink the old-pool cell after
oldpool. resize detached oldhead.
5. Drop f->use_lock.
The reproducer reports a resize ioctl blocked in the expected pool
teardown path:
signal: resize iteration=98 target_pool=4 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=651 wchan=snd_seq_pool_done
diagnostic: resize_tid=651 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
A second run with larger pools hit the same target path:
signal: resize iteration=32 target_pool=64 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=663 wchan=snd_seq_pool_done
diagnostic: resize_tid=663 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt
The null-pointer-guard was incorrect, returning _FAIL on valid pointer.
Invert the guard, so it returns _FAIL on invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: ak8975: fix potential kernel stack memory leak
Currently in the AK8975 driver there are four instances where potential
uninitialized kernel stack memory leaks can occur. If
i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than
the size of the buffer, uninitialized bytes are retained in the buffer
and later the buffer is passed on to IIO buffers, potentially leaking
memory to userspace.
Fix this by adding checks whether the return value of the function is
equal to the size of the buffer and subsequently if the value is
lesser than zero to distinguish from a returned error code. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in unpack_pdb
pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fail policy unpack on accept2 allocation failure
unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy
data. If that allocation failed, it set an error message but jumped to the
success path, returning a policydb with the required table missing.
Return -ENOMEM through the normal failure path when the ACCEPT2 allocation
fails. Remove the now-unused out label. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: release exe file resources on path failure
get_current_exe_path() takes both an exe_file reference and a path
reference before resolving the path name. If aa_path_name() failed, it
returned immediately and leaked both references.
Route the failure through the common cleanup path so fput() and path_put()
always run after the references are acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: fix kernel-infoleak in dgram_recvmsg()
KMSAN reported a kernel-infoleak in move_addr_to_user():
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
include/linux/instrumented.h:131 [inline]
BUG: KMSAN: kernel-infoleak in _inline_copy_to_user
include/linux/uaccess.h:205 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120
lib/usercopy.c:26
instrument_copy_to_user include/linux/instrumented.h:131 [inline]
_inline_copy_to_user include/linux/uaccess.h:205 [inline]
_copy_to_user+0xcc/0x120 lib/usercopy.c:26
copy_to_user include/linux/uaccess.h:236 [inline]
move_addr_to_user+0x2e7/0x440 net/socket.c:302
____sys_recvmsg+0x232/0x610 net/socket.c:2925
...
Uninit was stored to memory at:
ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline]
dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739
The issue occurs because the `pan_id` field of `struct ieee802154_addr`
is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`.
The execution flow is as follows:
1. `__ieee802154_rx_handle_packet()` declares a local `struct
ieee802154_hdr hdr` on the stack.
2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse
the source and destination addresses into this structure.
3. If the address mode is `IEEE802154_ADDR_NONE`,
`ieee802154_hdr_get_addr()` previously only set the `mode` field,
leaving the `pan_id` field containing uninitialized stack memory.
4. This uninitialized `pan_id` is later copied into a `struct
sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`.
5. Finally, `move_addr_to_user()` copies the socket address structure to
user space, leaking the uninitialized bytes.
Fix this by using `memset` to zero out the address structure in
`ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm_crb: Check ACPI_COMPANION() against NULL during probe
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack slot index in nospec checks
check_stack_write_fixed_off() computes the byte slot for a fixed-offset
stack write as -off - 1, and records each written byte in slot_type[] with
(slot - i) % BPF_REG_SIZE.
The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a
4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the
pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates
bytes 7..4. That can leave the second half-slot write without nospec_result
even though the bytes being overwritten still require sanitization.
Use the same slot index in the sanitization pre-check that the write path uses
when updating slot_type[]. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: msc313: fix NULL deref in shared IRQ handler at probe
msc313_rtc_probe() calls devm_request_irq() with IRQF_SHARED and
&pdev->dev as the cookie, but platform_set_drvdata() is only called
later after the clock setup. With a shared IRQ line, another device
on the same line can trigger the handler in that window. The
handler does dev_get_drvdata() on the cookie, gets NULL, and
dereferences priv->rtc_base in interrupt context.
Pass priv as the cookie directly so the handler reads it from
dev_id without the lookup, removing the dependency on probe order. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: Fix NULL pointer dereference in interface lookup
A malformed USB device can provide a vendor-specific interface without
any endpoint descriptors. fcp_find_fc_interface() currently selects the
first vendor-specific interface and reads endpoint 0 from it, without
checking whether the interface actually has any endpoints.
When bNumEndpoints is zero, no endpoint array is allocated for the parsed
alternate setting, so get_endpoint(..., 0) yields an invalid endpoint
descriptor pointer. Dereferencing it through usb_endpoint_num() then
triggers a NULL pointer dereference.
Skip vendor-specific interfaces that do not have any endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix insn_aux_data leak on verifier err_free_env path
When bpf_check() allocates env->insn_aux_data successfully but later
fails to allocate env->succ, it jumps directly to err_free_env.
The existing vfree(env->insn_aux_data) sits before the err_free_env
label, so that direct jump bypasses it and leaks insn_aux_data.
Move vfree(env->insn_aux_data) into err_free_env so all early and late
exit paths release it consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: adm1275: Prevent reading uninitialized stack
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix potential invalid pointer deref in group_process_tiler_oom()
If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid
pointer. Make sure we set it to NULL in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
