| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow
On the non-root path, __tb_property_parse_dir() takes dir_len from
entry->length (u16 widened to size_t). Two distinct OOB conditions
follow when entry->length < 4:
1. The non-root path begins with kmemdup(&block[dir_offset],
sizeof(*dir->uuid), ...) which always reads 4 dwords from
dir_offset. tb_property_entry_valid() only enforces
dir_offset + entry->length <= block_len, so a crafted entry
with dir_offset close to the end of the property block and
entry->length in 0..3 passes that gate but lets the UUID copy
run off the block (e.g. dir_offset = 497, dir_len = 3 in a
500-dword block reads block[497..501]).
2. After the kmemdup, content_len = dir_len - 4 underflows size_t
to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry
walk runs OOB on each iteration until an entry fails
validation or the kernel oopses on an unmapped page.
Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,
which closes both holes.
Also move INIT_LIST_HEAD(&dir->properties) up to immediately after
the dir allocation so the new error-return path (and the existing
uuid-alloc failure path) calling tb_property_free_dir() sees a
walkable list rather than the zero-initialized NULL next/prev that
list_for_each_entry_safe() would oops on. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix memory corruption with small endpoint
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| An out-of-bounds read (buffer over-read) vulnerability exists in QTextCodec::codecForName() in Qt. When the function is called with a QByteArray that is not NUL-terminated (for example, one created with QByteArray::fromRawData()), the codec-name matching routine reads past the end of the supplied buffer. In most cases this results in an incorrect text codec being selected; in the worst case, if the over-read reaches unmapped memory, the process crashes (denial of service). The over-read is bounded by the length of the longest codec-name candidate, and the out-of-bounds bytes are only compared internally against Qt's fixed list of codec names, so no data is disclosed to an attacker. Applications that do not pass non-NUL-terminated QByteArrays to QTextCodec::codecForName() are not exposed. The affected code resides in the Qt5Compat module from Qt 6.0.0 onward, and in Qt Core (qtbase) in Qt 4.x and Qt 5.x. |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to privilege escalation and remote code execution as root. This issue requires group administrator access. The impact is lower in Windows deployments. |
| In Progress ShareFile Storage Zones Controller versions prior to 5.12.5 and 6.0.2, an authenticated administrative user can exploit a path traversal vulnerability to read arbitrary files from the server filesystem, write files to arbitrary directories, or determine whether specific files exist on the server. |
| Unintended Proxy or Intermediary ('Confused Deputy') (CWE-441) in Kibana can lead to unauthorized information exposure via Accessing Functionality Not Properly Constrained by ACLs (CAPEC-1). Under certain conditions, a lower-privileged user can cause data from sources they are not authorized to access to be processed using another user's privileges. |
| Netty is a network application framework for development of protocol servers and clients. Prior to 4.2.16.Final, Netty's `Http3FrameCodec` buffers incoming data for HTTP/3 reserved frame types up to the wire-specified payload length without limits; `decodeFrame` trusts `payLoadLength`, allowing an attacker to open multiple QUIC streams and send reserved frames with very large payload lengths to cause memory exhaustion and denial of service. This issue is fixed in version 4.2.16.Final. |
| n8n versions before 2.30.1 contain a privilege escalation vulnerability in the AI Agents feature where the node-execution tool lacks proper authorization checks. A Project Viewer user can escalate privileges by chatting with an agent that has node tools enabled, executing arbitrary nodes and accessing credential secrets without proper authorization verification. |
| Vulnerability in the PeopleSoft Enterprise FIN Common Objects Argentina product of Oracle PeopleSoft (component: eProcurement). The supported version that is affected is 9.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise FIN Common Objects Argentina. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise FIN Common Objects Argentina accessible data as well as unauthorized access to critical data or complete access to all PeopleSoft Enterprise FIN Common Objects Argentina accessible data. CVSS 3.1 Base Score 9.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| A flaw was found in the keycloak-services component of Red Hat Build of Keycloak. The issue occurs because OAuth 2.0 authorization codes are not properly bound to the client that originally requested them. An attacker who can intercept an authorization code can modify it to be redeemed by their own client, potentially allowing them to obtain access tokens for a victim's identity. |
| A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix exec_queue leak on width check in stream open
In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the
function returns -EOPNOTSUPP directly, skipping the existing
err_exec_q cleanup path. The exec_queue reference obtained by
xe_exec_queue_lookup() is leaked.
The exec queue holds a reference on the xe_file, which is only
dropped during queue teardown. The leaked lookup ref is not on
the file's exec_queue xarray, so file close cannot release it.
This keeps both the exec queue and the file private state pinned
indefinitely.
Jump to err_exec_q instead of returning directly so the reference
is released.
(cherry picked from commit 339fa0be9e4a5d69fa47e91f4a36574224fb478f) |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: remove the software node when deactivating the aggregator
The dynamic software node we create for the aggregator platform device
when using configfs is leaked when the device is deactivated. Destroy it
as the last step in the tear-down path. |
| A path traversal vulnerability was found in pulpcore. The relative_path_validator function only verifies that content paths do not begin with "/" but fails to block directory traversal sequences such as "../" anywhere in the path. An authenticated administrator can craft a relative_path containing embedded traversal sequences (e.g., "looking/normal/../../../../etc/shadow") that escapes the intended export directory during FilesystemExport operations. Because the file content is also user-controlled (uploaded artifact), this allows arbitrary file write to any location writable by the Pulp service user, potentially leading to service compromise or further system exploitation. |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to remote code execution as root. A domain account with admin privileges and read and write access to the home directory is required. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by a privilege escalation vulnerability that allows a domain administrator to elevate their privileges to a system administrator. The impact is lower in Windows deployments. |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle EDI Gateway executes to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle EDI Gateway accessible data. CVSS 3.1 Base Score 1.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: EDI). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle EDI Gateway accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
