| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
In do_action()'s DeleteIndexEntryAllocation case, e->size comes
from an on-disk INDEX_BUFFER entry. When e->size makes
e + e->size point past hdr + hdr->used,
PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t
that is silently cast to a quasi-infinite size_t when passed
to memmove(). The memmove then walks past the destination
buffer.
The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543
already carries the corresponding guard:
if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize ||
Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) ||
used + esize > le32_to_cpu(hdr->total)) {
goto dirty_vol;
}
Apply the same shape to the allocation-path case. Also reject
esize == 0: memmove(e, e, ...) is a no-op and leaves
hdr->used unchanged, hiding a malformed entry from the
existing check_index_header() walk.
Reproduced under UML+KASAN on mainline 8d90b09e6741 by
mounting a crafted NTFS image: the unguarded memmove takes a
length of 0xffffffffffffff00 and the kernel oopses in
memmove+0x81/0x1a0 on the do_action+0x36a2 frame.
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes] |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate attribute values on lookup
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: pin svc_xprt across the asynchronous TLS handshake callback
svc_tcp_handshake() stores the raw svc_xprt pointer in
tls_handshake_args.ta_data and submits the request through
tls_server_hello_x509(). The handshake core takes only
sock_hold(req->hr_sk); nothing references the embedding struct
svc_sock that svc_tcp_handshake_done() reaches via container_of().
Two close races leave the in-flight callback writing through a freed
svc_sock. svc_sock_free() calls tls_handshake_cancel() and discards
its return value: a false return means handshake_complete() has
already set HANDSHAKE_F_REQ_COMPLETED but hp_done() may not have
finished, yet svc_sock_free() proceeds to kfree(svsk). The
cancel-loser fall-through inside svc_tcp_handshake() itself produces
the same window: when wait_for_completion_interruptible_timeout()
returns <= 0 (timeout or signal) and tls_handshake_cancel() returns
false, the function does not drain, returns, and svc_handle_xprt()
calls svc_xprt_received(), which clears XPT_BUSY and can drop the
last reference. A concurrent close then runs svc_sock_free() while
svc_tcp_handshake_done() is still updating xpt_flags and walking
svsk->sk_handshake_done.
The corruption surfaces as set_bit/clear_bit RMW into the freed
xpt_flags slab slot and as complete_all() walking and writing the
freed wait_queue_head_t list embedded in sk_handshake_done -- a
slab-corruption primitive, not a benign read. The path is reachable
on any TLS-enabled NFS server whenever a connection close overlaps
the tlshd downcall delivery window; the interruptible wait means
signal delivery suffices, not just SVC_HANDSHAKE_TO expiry.
Take svc_xprt_get(xprt) immediately before tls_server_hello_x509()
so the in-flight callback owns its own reference. Release it on the
two edges where the callback is guaranteed not to fire -- submission
failure from tls_server_hello_x509() and a successful
tls_handshake_cancel() -- and at the tail of
svc_tcp_handshake_done() after complete_all().
[cel: rewrote commit message to describe the actual change] |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: avoid OOB read of num_dests header
Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is
attempted to check whether enough space is actually in the network header.
But instead of using offsetofend() to check for the whole size (2) which
must be accessible, offsetof() of is called. The latter is always returning
0. The comparison with the network header length will always return that
enough data is available - even when only 1 or 0 bytes are accessible.
Instead of using offsetofend(), use the more common check for the whole
header. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: avoid sk_socket dereference in selinux_sctp_bind_connect()
selinux_sctp_bind_connect() dereferences sk->sk_socket to pass a
struct socket * to selinux_socket_bind() and
selinux_socket_connect_helper(). However, when the hook is invoked
from the ASCONF softirq path (sctp_process_asconf), there is no file
reference guaranteeing that sk->sk_socket is non-NULL. The setsockopt
callers (bindx, connectx, set_primary, sendmsg connect) hold a file
reference and are not affected.
Both selinux_socket_bind() and selinux_socket_connect_helper()
immediately resolve sock->sk, never using the struct socket * for
anything else. Refactor the inner logic into helpers that take a
struct sock * directly so that selinux_sctp_bind_connect() never needs
to touch sk->sk_socket at all. |
| In the Linux kernel, the following vulnerability has been resolved:
fhandle: reject detached mounts in capable_wrt_mount()
The recent fhandle RCU fix moved the mount namespace capability check
into capable_wrt_mount(), so a non-NULL mnt_namespace survives the
ns_capable() dereference. The helper still assumes the later
READ_ONCE(mount->mnt_ns) must be non-NULL because may_decode_fh()
checked is_mounted() first.
That assumption is not stable. A detached mount from
open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while
open_by_handle_at() is between those checks, and umount_tree() can
clear mount->mnt_ns. If the helper observes NULL, it dereferences
mnt_ns->user_ns and panics.
Return false when the RCU read observes a detached mount. This keeps
the relaxed permission path conservative: a mount no longer attached
to a namespace cannot authorize open_by_handle_at() access. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: handle inline data with a nonzero offset
nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset
into the per-command inline scatterlist. The bounds check admits any
offset with off + len <= inline_data_size, but the mapping still assumes
the data begins in the first inline page:
sg->offset = off;
sg->length = min_t(int, len, PAGE_SIZE - off);
When a port is configured with inline_data_size > PAGE_SIZE (settable up
to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size]
makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and
the block backend reads far past the first inline page. num_pages(len)
also ignores the offset, so an in-bounds offset whose [off, off+len)
span crosses a page boundary under-counts the scatterlist.
Map the offset properly: split it into a page index and an in-page
offset, start the scatterlist at that page, and size the page count from
page_off + len. Because the request scatterlist may now start at
inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL
identity test in nvmet_rdma_release_rsp() to a range test; otherwise the
persistent inline scatterlist is mistaken for an allocated one and
nvmet_req_free_sgls() frees an inline page (and warns in
free_large_kmalloc()). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: nat_keepalive: avoid double free on send error
nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6
send helper reports an error.
That cleanup is only correct before the skb is handed to the output
path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the
networking stack may already have consumed the skb before returning an
error, so freeing it again is unsafe.
Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4()
and nat_keepalive_send_ipv6(), where the caller still owns the skb, and
keep nat_keepalive_send() responsible only for family dispatch and the
unsupported-family cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: defer md5sig_info kfree past RCU grace period in tcp_connect
The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c)
has two symmetric branches:
if (needs_md5) {
tcp_ao_destroy_sock(sk, false);
} else if (needs_ao) {
tcp_clear_md5_list(sk);
kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...));
}
Both branches free a per-socket auth-info object while the socket is
in TCP_SYN_SENT and is already on the inet ehash (inserted by
inet_hash_connect() in tcp_v4_connect()). Both branches are reachable
by softirq RX-path readers that load the corresponding info pointer
via implicit RCU before bh_lock_sock_nested() is taken.
The needs_md5 branch is fixed in the prior patch by re-introducing
the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key
loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the
time it frees each tcp_ao_key all softirq readers that captured the
container have already completed rcu_read_unlock().
The needs_ao branch is not symmetric in the same way. The container
free can be deferred via kfree_rcu(md5sig, rcu) -- struct
tcp_md5sig_info already has the required rcu member
(include/net/tcp.h:1999-2002), and the rest of the tree already does
this in the tcp_md5sig_info_add() rollback paths
(net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done
by tcp_clear_md5_list() in process context BEFORE the container's
RCU grace period: it walks &md5sig->head and frees each
tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq
reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact()
(tcp_ipv4.c:1253, 1298) walks the same list via
hlist_for_each_entry_rcu() and races with that bare kfree on the
keys themselves -- a per-key slab use-after-free of the same class
as the TCP-AO bug, on the same race window.
Fix this in two halves:
1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the
md5sig_info container joins the rest of the md5sig lifecycle.
The local-variable lift is mechanical and required because
kfree_rcu() is a macro that expects an lvalue.
2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del +
kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct
tcp_md5sig_key already carries the rcu member
(include/net/tcp.h:1995) and tcp_md5_do_del()
(net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this
restores the lifecycle invariant the rest of the file follows
rather than introducing a one-off.
The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock()
(net/ipv4/tcp.c:412), which runs from the sock destructor when the
socket is already unhashed and unreachable; the extra grace period
there is unnecessary but harmless. Making the helper unconditionally
RCU-safe is the cleaner contract.
The needs_ao branch is not reachable by the userns reproducer used
to demonstrate the AO-side splat (the repro installs both keys but
ends up in the needs_md5 branch because the connect peer matches
the MD5 key, not the AO key); however the symmetric race exists
and a maintainer touching this code should not have to think about
which branch escapes RCU and which one does not.
[also credits to Qihang, who found that this races with tcp-diag] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Validate size in snd_sof_update_control
In snd_sof_update_control(), firmware-provided cdata->num_elems is
checked against local_cdata->data->size but never against the actual
allocation size. If local_cdata->data->size was previously set to an
inconsistent value, the memcpy could write past the allocated buffer.
Add a bounds check to ensure num_elems fits within the available space
in the ipc_control_data allocation before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix condition in 'nand_select_target()'
'cs' here must be in range [0:nanddev_ntargets[. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: fix uninitialized struct pages for ZONE_DEVICE
If DAX memory is hotplugged into an unoccupied subsection of an early
section, section_activate() reuses the unoptimized boot memmap. However,
compound_nr_pages() still assumes that vmemmap optimization is in effect
and initializes only the reduced number of struct pages. As a result, the
remaining tail struct pages are left uninitialized, which can later lead
to unexpected behavior or crashes.
Fix this by treating early sections as unoptimized when calculating how
many struct pages to initialize. |
| A weakness has been identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. This affects an unknown part of the component Wi-Fi Timer Power-Schedule Feature. Executing a manipulation of the argument switch_power/restore_power can lead to os command injection. The attack can be launched remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: reject data replies with an out-of-range payload size
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/compaction: handle free_pages_prepare() properly in compaction_free()
free_pages_prepare() can fail but compaction_free() does not handle the
failure case. Failed pages should not be added back to cc->freepages for
future use, since they can be either PageHWPoison or free_page_is_bad()
and might cause data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: keep the readdir entry size 64-bit in fill_from_part()
fill_from_part() computes the size of a directory entry in size_t but
stores it in a __u32. An entry length near U32_MAX wraps it to a small
value, bypasses the bounds check, and is then used to index the entry,
reading far past the directory part -- an out-of-bounds read that oopses
the kernel.
Compute the size as a u64 so it cannot truncate; the bounds check then
rejects the entry. The trailer is supplied by the userspace client. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When taprio's software path peeks a non-work-conserving child qdisc, the
child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq()
then takes the packet with a direct child ->dequeue() call, which ignores
that stash, orphans the peeked skb and desyncs the child's qlen/backlog.
With a qfq child this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb
now do. The helper returns the child's stashed skb first and is a no-op
when there is none, so a work-conserving child is unaffected and the
gated path now consumes the skb whose length was charged to the budget. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix user refcount underflow in event delivery
ipmi_alloc_recv_msg(user) takes the temporary user reference owned by the
receive message, and ipmi_free_recv_msg() drops it again. If event delivery
fails after allocating receive messages for earlier users,
handle_read_event_rsp() rolls those messages back with
ipmi_free_recv_msg().
That rollback path still drops user->refcount explicitly after freeing each
message. The extra put can free a user that remains linked on intf->users,
so later event delivery may dereference a freed user or trip refcount_t's
addition-on-zero warning when ipmi_alloc_recv_msg() tries to acquire
another reference.
Remove the stale explicit put and the now-dead user assignment. Keep the
list_del() and ipmi_free_recv_msg() calls; they are the required rollback
operations. |
