Export limit exceeded: 400630 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (90511 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74494 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject repeated SMB2 NEGOTIATE requests Unauthenticated client can send multiple successful SMB2 NEGOTIATE requests on one connection before SESSION_SETUP. While the connection is in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation. Only the final allocation is freed when the connection is released, leaking one object for every additional successful request. A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect without replying in this case. Set the connection exiting when rejecting the request, in addition to suppressing the response. Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they update connection-wide dialect and negotiation state. Move the locking contract to ksmbd_smb_negotiate_common(), where the state and dialect are selected, and add ksmbd_conn_new() for consistent state access. | ||||
| CVE-2026-74487 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Restore write access in put_binfmt_handler() before closing the interpreter file. | ||||
| CVE-2026-74470 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | ||||
| CVE-2026-72262 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get The ipc_control_data buffer is allocated as kzalloc(max_size), where max_size covers the entire struct sof_ipc_ctrl_data including its flexible array payload. However, the bounds checks in bytes_ext_put and _bytes_ext_get compared user data lengths against max_size directly, ignoring that cdata->data sits at an offset of sizeof(struct sof_ipc_ctrl_data) bytes into the allocation. This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past the end of the heap buffer from unprivileged userspace via the ALSA TLV kcontrol interface, and similarly allowed over-reading adjacent heap data on the get path. Fix all bounds checks to subtract sizeof(*cdata) from max_size so they reflect the actual space available at the cdata->data offset. Also fix the error-path restore in bytes_ext_put which wrote to cdata->data instead of cdata, causing the same overflow. | ||||
| CVE-2026-72252 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocation failure the cloned nft_pipapo_match can enter a bad state: - some fields can have their lookup tables resized while others did not - bits might have been toggled - scratch map can be undersized which also means m->bsize_max can be lower than what is required This means that the next insertion in the same batch can trigger out-of-bounds writes. Furthermore, a failure in the first can result in the bad clone to leak into the next transaction because the abort callback is never executed in this case (the upper layer saw an error and no attempt to allocate a transactional request was made). Record a state for the nft_pipapo_match structure: - NEW (pristine clone) - MOD (modified clone with good state) - ERR (potentially bogus content) Then make it so that deletes and insertions fail when the clone entered ERR state. In case the very first insert attempt results in an error, free the clone right away. | ||||
| CVE-2026-72216 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: Fix leak when custom dump_segments addition fails Free allocated minidump_region 'name' in qcom_add_minidump_segments() when failing before adding the region to 'dump_segments'. Otherwise, the 'name' is not tracked and is never freed by qcom_minidump_cleanup(). Return error when adding to 'dump_segments' fails. | ||||
| CVE-2026-72191 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: validate split-point offset in indx_insert_into_buffer indx_insert_into_buffer() computes used = used1 - to_copy - sp_size; memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off)); where sp and sp_size come from hdr_find_split(). hdr_find_split() walks entries by le16_to_cpu(e->size) without validating that each step stays within hdr->used or that the size field is at least sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper, only validates header-level fields (used, total, de_off) and does not walk per-entry sizes. A crafted NTFS image whose leaf INDEX_HDR reports used == total but contains one interior NTFS_DE with size = 0xFFF0 therefore passes validation, descends to indx_insert_into_buffer() through the ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split() return an sp whose sp_size (0xFFF0) greatly exceeds the remaining bytes in the buffer. The u32 subtraction underflows and the memmove count becomes a near-4-GiB value, producing an out-of-bounds kernel write that corrupts adjacent allocations and panics the kernel. Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a single 'touch' inside the mounted directory; crash site resolves to fs/ntfs3/index.c at the memmove. Trigger requires only local mount of an attacker-supplied filesystem image (USB, loopback, or removable media auto-mount). Reject the split whenever the chosen sp plus its declared size already extends past hdr1->used. This is the minimal fix; it preserves the existing hdr_find_split() contract and relies on the same out: cleanup path as the pre-existing error returns. A prior OOB read in the very same indx_insert_into_buffer() memmove was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in indx_insert_into_buffer") by tightening hdr_find_e(), but that fix does not cover the split-point size field path addressed here: sp is returned by hdr_find_split(), not hdr_find_e(), and the underflow is driven by sp->size rather than hdr->used exceeding hdr->total. | ||||
| CVE-2026-72157 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). | ||||
| CVE-2026-72142 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes: tag and stable range. | ||||
| CVE-2026-72087 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use. | ||||
| CVE-2026-72077 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix firmware leak in async update The firmware object was not being released if validation failed. Use __free(firmware) to ensure the firmware is always released. | ||||
| CVE-2026-72058 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ixp4xx_hss: fix duplicate HDLC netdev allocation ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored in ndev, initialized, and registered with register_hdlc_device(). The second one is stored in port->netdev and later used by the remove path for unregister_hdlc_device() and free_netdev(). This means that the registered netdev is not the same object that is unregistered and freed on remove. It also leaks the first allocation if the second alloc_hdlcdev() call fails, and the first allocation is not checked before ndev is used. Older code allocated the HDLC netdev only once and stored the same object in both the local variable and port->netdev. The buggy conversion split this into two alloc_hdlcdev() calls. A later rename changed the local variable name to ndev, but the underlying mismatch remained. Fix this by allocating the HDLC netdev only once and assigning the same object to port->netdev. | ||||
| CVE-2026-72057 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments(). | ||||
| CVE-2026-72041 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: espintcp: use sk_msg_free_partial to fix partial send sk_msg_free_partial() ensures consistency of the skmsg at every iteration, without having to manually handle uncharges and offsets. This simplifies the code, and fixes some bugs in skmsg accounting when we don't send the full contents. | ||||
| CVE-2026-72030 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Reject an invalid concurrent positioning ranges count ata_dev_config_cpr() takes the number of range descriptors from buf[0] of the concurrent positioning ranges log (up to 255), which the device reports independently of the log size in the GPL directory. The count is then walked at a fixed 32-byte stride in two places with no bound: the log read here, and the INQUIRY VPD page B9h emitter, which writes one descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device reporting a count larger than its own log overflows the read buffer (up to 7704 bytes past a 512-byte slab), and a count above 62 overflows the response buffer on the emit side. Bound the count once, on probe, against both the log the device returned and the number of descriptors the VPD B9h response buffer can hold (ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range count with a warning; this keeps the emitter in bounds with no separate change there. | ||||
| CVE-2026-72023 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix SQB pointer leak on init failure otx2_init_hw_resources() initializes SQ aura and pool resources before several later setup steps. On failure, err_free_sq_ptrs only frees SQB pages, leaving the per-SQ sqb_ptrs arrays behind. Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs even when sq->sqe has not been allocated yet. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an OcteonTX2 PF device and the corresponding AF mailbox setup to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-72017 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: drop in-flight Tx SKBs on close The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue->tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty. | ||||
| CVE-2026-68253 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: check streams[] bounds before overflow The data->streams[] overflow check is done after the buffer overflow has already happened. Move the overflow check before the write. Side note, emitting a warning splat with a backtrace might be overkill here, but prefer not changing the behaviour other than not doing the overrun. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 9284ab3b6e776c315883ac2611283d263c9460fd) | ||||
| CVE-2026-68159 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | ||||
| CVE-2026-68150 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path. This results in a second unlock attempt in __iterate_supers() that corrupts the rwsem state, triggering a DEBUG_RWSEMS warning: [ 182.601148] sysrq: Emergency Thaw of all frozen filesystems [ 182.601865] ------------[ cut here ]------------ [ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty [ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53 [ 182.604578] Modules linked in: [ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy) [ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014 [ 182.606417] Workqueue: events do_thaw_all [ 182.606750] RIP: 0010:up_write+0xaf/0x170 [ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d [ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246 [ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870 [ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10 [ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80 [ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000 [ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800 [ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000 [ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0 [ 182.613722] Call Trace: [ 182.613946] <TASK> [ 182.614130] __iterate_supers+0x128/0x150 [ 182.614463] do_thaw_all+0x1b/0x30 [ 182.614759] process_scheduled_works+0xbb/0x3f0 [ 182.615150] ? __pfx_worker_thread+0x10/0x10 [ 182.615499] worker_thread+0x129/0x270 [ 182.615816] ? __pfx_worker_thread+0x10/0x10 [ 182.616201] kthread+0xe2/0x120 [ 182.616469] ? __pfx_kthread+0x10/0x10 [ 182.616792] ret_from_fork+0x15b/0x240 [ 182.617115] ? __pfx_kthread+0x10/0x10 [ 182.617426] ret_from_fork_asm+0x1a/0x30 [ 182.617761] </TASK> [ 182.617968] ---[ end trace 0000000000000000 ]--- [ 182.618412] Emergency Thaw complete Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount in the callback via super_lock_excl() before calling thaw_super_locked(). This matches the locking pattern expected by thaw_super_locked() and eliminates the double unlock. While at it, remove the dead 'return;' at the end of do_thaw_all_callback(). | ||||